From mboxrd@z Thu Jan 1 00:00:00 1970 From: tony@atomide.com (Tony Lindgren) Date: Wed, 5 Sep 2012 16:29:58 -0700 Subject: [PATCH] ARM: OMAP2+: select PINCTRL in Kconfig In-Reply-To: <331ABD5ECB02734CA317220B2BBEABC13EA25D99@DBDE01.ent.ti.com> References: <1346047244-26909-1-git-send-email-anilkumar@ti.com> <331ABD5ECB02734CA317220B2BBEABC13EA25D99@DBDE01.ent.ti.com> Message-ID: <20120905232957.GN1303@atomide.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org * AnilKumar, Chimata [120903 05:42]: > Hi Tony, > > On Mon, Aug 27, 2012 at 11:30:44, AnilKumar, Chimata wrote: > > Select PINCTRL in Kconfig under Typical OMAP configuration, this > > is required to add pinctrl driver to omap2+ family of devices. > > > > Signed-off-by: AnilKumar Ch > > --- > > arch/arm/mach-omap2/Kconfig | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig > > index dd2db02..a164568 100644 > > --- a/arch/arm/mach-omap2/Kconfig > > +++ b/arch/arm/mach-omap2/Kconfig > > @@ -18,6 +18,7 @@ config ARCH_OMAP2PLUS_TYPICAL > > select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4 > > select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4 > > select HIGHMEM > > + select PINCTRL > > help > > Compile a kernel suitable for booting most boards > > > > -- > > 1.7.9.5 > > > > > > If there are no comments on this patch, can you push this patch to devel-dt? Yes will do, will post first few fixes and support for adding pinctrl-single controllers for omap2/3/4 that I have here. Tony