[PATCH RESEND v5 1/3] arm/dts: AM33XX: Add basic pinctrl device tree data

[tony@atomide.com (Tony Lindgren)]

* AnilKumar Ch <anilkumar@ti.com> [120905 04:41]:
> Adds basic pinctrl device tree data for AM33XX family of devices.
> This patch is based on the pinctrl-single driver.
> 
> Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
> ---
>  arch/arm/boot/dts/am33xx.dtsi |    9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index be43511..bf5f713 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -40,6 +40,15 @@
>  		};
>  	};
>  
> +	am3358_pinmux: pinmux at 44e10800 {
> +		compatible = "pinctrl-single";
> +		reg = <0x44e10800 0x0238>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		pinctrl-single,register-width = <32>;
> +		pinctrl-single,function-mask = <0x7f>;
> +	};
> +
>  	/*
>  	 * XXX: Use a flat representation of the AM33XX interconnect.
>  	 * The real AM33XX interconnect network is quite complex.Since

Sorry meant to comment here on the am3358_pinmux naming vs am33xx_pinmux
naming, please check the comment in the earlier version of this patch.

Regards,

Tony