[PATCH v6 10/10] ARM: OMAP2+: tusb6010: generic timing calculation

[tony@atomide.com (Tony Lindgren)]

* Mohammed, Afzal <afzal@ti.com> [120906 00:40]:
> Hi Tony,
> 
> On Mon, Sep 03, 2012 at 11:04:10, Mohammed, Afzal wrote:
> > On Mon, Aug 27, 2012 at 14:04:44, Mohammed, Afzal wrote:
> > > On Sat, Aug 25, 2012 at 01:16:30, Tony Lindgren wrote:
> 
> > > > This hangs n800 during the boot.
> 
> Paul reported that n800 stopped booting on OMAP baseline [1]
> due to an mmc issue and has posted a solution [2].
> 
> Are you facing the same issue ?, if so, then it is not
> due to this series.

No that's a separate issue. Your series works except for
this patch makes thing hang.

Regards,

Tony
 
> I tried to get an n800, but has been unsuccessful.
> 
> Regards
> Afzal
> 
> [1] http://marc.info/?l=linux-omap&m=134685988517580&w=2
> [2] http://www.spinics.net/lists/arm-kernel/msg190879.html
> 
> 
> > > 
> > > Shall I read the above as n800 boot without patch 10/10,
> > > but with the other patches in this series ?
> > > 
> > > As per the board file, n800 has tusb6010 as well as
> > > OneNAND in sync read & async write mode, was OneNAND
> > > working without 10/10.
> > > 
> > > Do you have any idea, which timing could have gone wrong,
> > > can you please sent me DEBUG enabled gpmc log with and
> > > without 10/10.
> > 
> > Can you please sent me GPMC DEBUG enabled logs with and
> > without this series.
>