[PATCH v2 0/2] gpio-twl4030: add new device tree properties

[tony@atomide.com (Tony Lindgren)]

* Benoit Cousson <b-cousson@ti.com> [120905 07:42]:
> Hi Florian,
> 
> On 09/05/2012 09:46 AM, Florian Vaussard wrote:
> > Hello,
> > 
> > A number of platform data are missing when using twl4030/gpio from a
> > device tree. This patchset adds the missing properties, updates the 
> > documentation with the new bindings, and updates existing device trees.
> > It mainly enables LEDA and LEDB outputs, as well as pullups /
> > pulldowns on GPIOs.
> > 
> > The 1st patch changes the device driver and updates the documentation.
> > The 2nd patch updates the device trees for BeagleBoard and omap3-evm.
> > 
> > Changes since v1: 
> > - Patches on driver and documentation merged into the same patch
> > - Put device trees' values in hexadecimal
> > - Handle bool property using of_property_read_bool()
> > - Prefix the patches with the correct convention
> 
> Thanks for the update.
> 
> > Tested on Gumstix Overo. V1 was tested on omap3-evm by Vaibhav Hiremath.
> 
> I've just tested it on beagle xM. I can play with D12 led using:
> 
> echo 255 > /sys/class/leds/beagleboard\:\:pmu_stat/brightness
> 
> Tested-by: Benoit Cousson <b-cousson@ti.com>
> 
> 
> > BTW: who will merge this?
> 
> Since Linus already acked it, Tony can merge it.
> 
> 
> Tony,
> 
> I can add that series in my DTS series for 3.7 if you want.

Yes please do thanks.

Tony