From mboxrd@z Thu Jan 1 00:00:00 1970 From: s.hauer@pengutronix.de (Sascha Hauer) Date: Tue, 18 Sep 2012 09:52:13 +0200 Subject: [PATCH 00/34] i.MX multi-platform support In-Reply-To: <1347860103-4141-1-git-send-email-shawn.guo@linaro.org> References: <1347860103-4141-1-git-send-email-shawn.guo@linaro.org> Message-ID: <20120918075213.GD24458@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Shawn, On Mon, Sep 17, 2012 at 01:34:29PM +0800, Shawn Guo wrote: > The series enables multi-platform support for imx. Since the required > frameworks (clk, pwm) and spare_irq have already been adopted on imx, > the series is all about cleaning up mach/* headers. Along with the > changes, arch/arm/plat-mxc gets merged into arch/arm/mach-imx. > > It's based on a bunch of branches (works from others), Rob's initial > multi-platform series, Arnd's platform-data and smp_ops (Marc's) and > imx 3.7 material (Sascha and myself). > > It's available on branch below. > > git://git.linaro.org/people/shawnguo/linux-2.6.git imx/multi-platform > > It's been tested on imx5 and imx6, and only compile-tested on imx2 and > imx3, so testing on imx2/3 are appreciated. > > Subsystem maintainers, > > I plan to send the whole series via arm-soc tree at the end of 3.7 > merge window when all dependant bits hit mainline. Please have a > look at the patches you get copied and provide ACKs if the changes > are good. Thanks. I just had a look at the remaining initcalls in arch-imx. Most of them are protected with a cpu_is_*, but this one should be fixed before i.MX is enabled for multi platform: arch/arm/mach-imx/devices/devices.c:48:core_initcall(mxc_device_init); I think this won't harm others directly, but it will register i.MX related devices on foreign platforms. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |