From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 09.5/16] mmc: omap: Remove cpu_is_omap usage from the driver
Date: Fri, 5 Oct 2012 12:47:37 -0700 [thread overview]
Message-ID: <20121005194737.GP3874@atomide.com> (raw)
In-Reply-To: <87ipaog4mp.fsf@octavius.laptop.org>
* Chris Ball <cjb@laptop.org> [121005 11:24]:
> Hi Tony,
>
> On Fri, Oct 05 2012, Tony Lindgren wrote:
> > This is needed for the ARM common zImage support.
> >
> > We can use the existing slot features to pass omap1
> > specific options to the driver. For omap2 we don't
> > want to pass anything new as that will be eventually
> > moved to use device tree based init.
> >
> > Note that this patch depends on earlier patch that
> > moves plat/mmc.h into include/linux/platform_data.
> >
> > Cc: Chris Ball <cjb@laptop.org>
> > Cc: Venkatraman S <svenkatr@ti.com>
> > Cc: linux-mmc at vger.kernel.org
> > Signed-off-by: Tony Lindgren <tony@atomide.com>
> >
> > ---
> >
> > Chris, I can set up a minimal immutable branch with omap
> > header changes that you can also pull into MMC tree if these
> > two MMC patches look ackable to you.
>
> Thanks, sounds good.
>
> Acked-by: Chris Ball <cjb@laptop.org>
Thanks will do when -rc1 is available.
Looks like I posted a version before running stg refresh
that was missing two compile fixes: MMC_OMAP7XXX should be
MMC_OMAP7XX and !mmc_omap1 should be !mmc_omap1().
Updated patch below.
Regards,
Tony
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 4 Oct 2012 19:01:53 -0700
Subject: [PATCH] mmc: omap: Remove cpu_is_omap usage from the driver
This is needed for the ARM common zImage support.
We can use the existing slot features to pass omap1
specific options to the driver. For omap2 we don't
want to pass anything new as that will be eventually
moved to use device tree based init.
Note that this patch depends on earlier patch that
moves plat/mmc.h into include/linux/platform_data.
Cc: linux-mmc at vger.kernel.org
Cc: Venkatraman S <svenkatr@ti.com>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 1cc4e18..f9c4fb9 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -177,6 +177,13 @@ static int __init omap_mmc_add(const char *name, int id, unsigned long base,
res[3].name = "tx";
res[3].flags = IORESOURCE_DMA;
+ if (cpu_is_omap7xx())
+ data->slots[0].features = MMC_OMAP7XX;
+ if (cpu_is_omap15xx())
+ data->slots[0].features = MMC_OMAP15XX;
+ if (cpu_is_omap16xx())
+ data->slots[0].features = MMC_OMAP16XX;
+
ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
if (ret == 0)
ret = platform_device_add_data(pdev, data, sizeof(*data));
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index e7c61b9..9f0e26f 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -30,7 +30,6 @@
#include <linux/slab.h>
#include <linux/platform_data/mmc-omap.h>
-#include <plat/cpu.h>
#include <plat/dma.h>
#define OMAP_MMC_REG_CMD 0x00
@@ -73,6 +72,13 @@
#define OMAP_MMC_STAT_CARD_BUSY (1 << 2)
#define OMAP_MMC_STAT_END_OF_CMD (1 << 0)
+#define mmc_omap7xx() (host->features & MMC_OMAP7XX)
+#define mmc_omap15xx() (host->features & MMC_OMAP15XX)
+#define mmc_omap16xx() (host->features & MMC_OMAP16XX)
+#define MMC_OMAP1_MASK (MMC_OMAP7XX | MMC_OMAP15XX | MMC_OMAP16XX)
+#define mmc_omap1() (host->features & MMC_OMAP1_MASK)
+#define mmc_omap2() (!mmc_omap1())
+
#define OMAP_MMC_REG(host, reg) (OMAP_MMC_REG_##reg << (host)->reg_shift)
#define OMAP_MMC_READ(host, reg) __raw_readw((host)->virt_base + OMAP_MMC_REG(host, reg))
#define OMAP_MMC_WRITE(host, reg, val) __raw_writew((val), (host)->virt_base + OMAP_MMC_REG(host, reg))
@@ -148,6 +154,7 @@ struct mmc_omap_host {
u32 buffer_bytes_left;
u32 total_bytes_left;
+ unsigned features;
unsigned use_dma:1;
unsigned brs_received:1, dma_done:1;
unsigned dma_in_use:1;
@@ -989,7 +996,7 @@ mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req)
* blocksize is at least that large. Blocksize is
* usually 512 bytes; but not for some SD reads.
*/
- burst = cpu_is_omap15xx() ? 32 : 64;
+ burst = mmc_omap15xx() ? 32 : 64;
if (burst > data->blksz)
burst = data->blksz;
@@ -1105,8 +1112,7 @@ static void mmc_omap_set_power(struct mmc_omap_slot *slot, int power_on,
if (slot->pdata->set_power != NULL)
slot->pdata->set_power(mmc_dev(slot->mmc), slot->id, power_on,
vdd);
-
- if (cpu_is_omap24xx()) {
+ if (mmc_omap2()) {
u16 w;
if (power_on) {
@@ -1240,7 +1246,7 @@ static int __devinit mmc_omap_new_slot(struct mmc_omap_host *host, int id)
mmc->ops = &mmc_omap_ops;
mmc->f_min = 400000;
- if (cpu_class_is_omap2())
+ if (mmc_omap2())
mmc->f_max = 48000000;
else
mmc->f_max = 24000000;
@@ -1360,6 +1366,7 @@ static int __devinit mmc_omap_probe(struct platform_device *pdev)
init_waitqueue_head(&host->slot_wq);
host->pdata = pdata;
+ host->features = host->pdata->slots[0].features;
host->dev = &pdev->dev;
platform_set_drvdata(pdev, host);
@@ -1392,7 +1399,7 @@ static int __devinit mmc_omap_probe(struct platform_device *pdev)
host->dma_tx_burst = -1;
host->dma_rx_burst = -1;
- if (cpu_is_omap24xx())
+ if (mmc_omap2())
sig = host->id == 0 ? OMAP24XX_DMA_MMC1_TX : OMAP24XX_DMA_MMC2_TX;
else
sig = host->id == 0 ? OMAP_DMA_MMC_TX : OMAP_DMA_MMC2_TX;
@@ -1408,7 +1415,7 @@ static int __devinit mmc_omap_probe(struct platform_device *pdev)
dev_warn(host->dev, "unable to obtain TX DMA engine channel %u\n",
sig);
#endif
- if (cpu_is_omap24xx())
+ if (mmc_omap2())
sig = host->id == 0 ? OMAP24XX_DMA_MMC1_RX : OMAP24XX_DMA_MMC2_RX;
else
sig = host->id == 0 ? OMAP_DMA_MMC_RX : OMAP_DMA_MMC2_RX;
@@ -1436,7 +1443,7 @@ static int __devinit mmc_omap_probe(struct platform_device *pdev)
}
host->nr_slots = pdata->nr_slots;
- host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
+ host->reg_shift = (mmc_omap7xx() ? 1 : 2);
host->mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0);
if (!host->mmc_omap_wq)
diff --git a/include/linux/platform_data/mmc-omap.h b/include/linux/platform_data/mmc-omap.h
index 39a7abc..2bf6ea82 100644
--- a/include/linux/platform_data/mmc-omap.h
+++ b/include/linux/platform_data/mmc-omap.h
@@ -107,6 +107,9 @@ struct omap_mmc_platform_data {
/* we can put the features above into this variable */
#define HSMMC_HAS_PBIAS (1 << 0)
#define HSMMC_HAS_UPDATED_RESET (1 << 1)
+#define MMC_OMAP7XX (1 << 2)
+#define MMC_OMAP15XX (1 << 3)
+#define MMC_OMAP16XX (1 << 4)
unsigned features;
int switch_pin; /* gpio (card detect) */
next prev parent reply other threads:[~2012-10-05 19:47 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-04 22:04 [PATCH 00/16] More omap plat header cleanup for v3.8 merge window Tony Lindgren
2012-10-04 22:04 ` [PATCH 01/16] ARM: OMAP2+: Make board-zoom.h local Tony Lindgren
2012-10-04 22:04 ` [PATCH 02/16] ARM: OMAP: Split plat-omap/i2c.c into mach-omap1 and mach-omap2 Tony Lindgren
2012-10-05 8:53 ` Shubhrajyoti
2012-10-04 22:04 ` [PATCH 03/16] ARM: OMAP: Make plat/common.h local to " Tony Lindgren
2012-10-04 22:04 ` [PATCH 04/16] ARM: OMAP: Make plat/fpga.h local to arch/arm/plat-omap Tony Lindgren
2012-10-04 22:04 ` [PATCH 05/16] ARM: OMAP1: Move plat/tc.h to mach/tc.h for omap1 Tony Lindgren
2012-10-04 22:04 ` [PATCH 06/16] ARM: OMAP: Move plat/led.h to include/linux/platform_data Tony Lindgren
2012-10-04 22:04 ` [PATCH 07/16] ARM: OMAP: Make plat/sram.h local to plat-omap Tony Lindgren
2012-10-05 13:58 ` Jon Hunter
2012-10-08 16:31 ` Tony Lindgren
2012-10-04 22:04 ` [PATCH 08/16] ARM: OMAP2: Move plat/menelaus.h to linux/mfd/menelaus.h Tony Lindgren
2012-10-16 0:11 ` Tony Lindgren
2012-10-25 11:11 ` Samuel Ortiz
2012-10-25 19:03 ` Tony Lindgren
2012-10-04 22:04 ` [PATCH 09/16] ARM: OMAP: Split plat/mmc.h into local headers and platform_data Tony Lindgren
2012-10-05 6:38 ` Venkatraman S
2012-10-05 18:09 ` Tony Lindgren
2012-10-05 18:08 ` [PATCH 09.5/16] mmc: omap: Remove cpu_is_omap usage from the driver Tony Lindgren
2012-10-05 18:23 ` Chris Ball
2012-10-05 19:47 ` Tony Lindgren [this message]
2012-10-16 21:02 ` Tony Lindgren
2012-10-04 22:04 ` [PATCH 10/16] ARM: OMAP: Make omap_device local to mach-omap2 Tony Lindgren
2012-10-26 1:27 ` Paul Walmsley
2012-10-26 16:39 ` Tony Lindgren
2012-10-26 17:02 ` Paul Walmsley
2012-10-26 17:10 ` Tony Lindgren
2012-10-26 20:18 ` Paul Walmsley
2012-10-26 20:37 ` Tony Lindgren
2012-10-26 20:45 ` Paul Walmsley
2012-10-04 22:04 ` [PATCH 11/16] ARM: OMAP: Make plat/omap_hwmod.h " Tony Lindgren
2012-10-04 22:05 ` [PATCH 12/16] ARM: OMAP: Merge plat/multi.h into plat/cpu.h Tony Lindgren
2012-10-04 22:05 ` [PATCH 13/16] ARM: OMAP: Split uncompress.h to mach-omap1 and mach-omap2 Tony Lindgren
2012-10-04 22:05 ` [PATCH 14/16] ARM: OMAP: Split plat/serial.h for omap1 and omap2+ Tony Lindgren
2012-10-04 22:05 ` [PATCH 15/16] ARM: OMAP: Move plat/omap-serial.h to linux/platform_data/serial-omap.h Tony Lindgren
2012-10-04 22:05 ` [PATCH 16/16] ARM: OMAP: Make plat/omap-pm.h local to mach-omap2 Tony Lindgren
2012-10-04 22:26 ` Laurent Pinchart
2012-10-08 8:52 ` [PATCH 00/16] More omap plat header cleanup for v3.8 merge window Santosh Shilimkar
2012-10-08 9:24 ` Santosh Shilimkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121005194737.GP3874@atomide.com \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).