* Kernel panic in mxs_auart_irq_handle with latest kernel?
@ 2012-10-05 23:58 Subodh Nijsure
2012-10-08 7:45 ` Uwe Kleine-König
0 siblings, 1 reply; 5+ messages in thread
From: Subodh Nijsure @ 2012-10-05 23:58 UTC (permalink / raw)
To: linux-arm-kernel
On my MX28 based board with top of the Linus's git tree I am consistently getting following kernel panic, anybody else seen this?
(I will start bisecting and see if I can find a reason this wknd)
-Subodh
[ 9.700000] [00000118] *pgd=00000000
[ 9.700000] Internal error: Oops: 5 [#1] PREEMPT ARM
[ 9.700000] Modules linked in:
[ 9.700000] CPU: 0 Not tainted (3.6.0-11641-gbe4ae13-dirty #1)
[ 9.700000] PC is at uart_insert_char+0x38/0x130
[ 9.700000] LR is at mxs_auart_irq_handle+0x198/0x2b0
[ 9.700000] pc : [<c025a3e0>] lr : [<c0261700>] psr: 40000093
[ 9.700000] sp : c0549ea0 ip : 00000000 fp : 00000001
[ 9.700000] r10: 00000000 r9 : c057e64e r8 : 00000020
[ 9.700000] r7 : 00000000 r6 : 00080000 r5 : 00000000 r4 : c39566c0
[ 9.700000] r3 : 00000020 r2 : 00000000 r1 : 00000000 r0 : 00000000
[ 9.700000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
[ 9.700000] Control: 0005317f Table: 40004000 DAC: 00000017
[ 9.700000] Process swapper (pid: 0, stack limit = 0xc0548270)
[ 9.700000] Stack: (0xc0549ea0 to 0xc054a000)
[ 9.700000] 9ea0: c0554c00 00200002 00000000 c39566c0 00000000 0052006d 0052006d c0261700
[ 9.700000] 9ec0: 00000000 c0548000 c398f980 c0548000 00000000 00000000 000000d3 c057e64e
[ 9.700000] 9ee0: c387d700 c0063e74 ffffffff 20000093 00000002 c387d700 c0548000 00000000
[ 9.700000] 9f00: c0549f9c 40004000 41069265 40541cd8 00000000 c006403c 427c4747 00000002
[ 9.700000] 9f20: c0548000 c0548000 c387d700 c00662dc 000000d3 000000d3 00000000 c00637b0
[ 9.700000] 9f40: c0568748 c000ffec f5000000 c0549f68 c0587814 c0008778 c0010144 60000013
[ 9.700000] 9f60: ffffffff c000eda0 00000000 0005317f 0005217f 60000013 c0548000 c05875a8
[ 9.700000] 9f80: c0554300 c0644480 40004000 41069265 40541cd8 00000000 600000d3 c0549fb0
[ 9.700000] 9fa0: c0010138 c0010144 60000013 ffffffff 60000093 c0010308 c05500a8 c0587520
[ 9.700000] 9fc0: c0543150 c0522700 ffffffff ffffffff c05221d0 00000000 00000000 c0543150
[ 9.700000] 9fe0: 00000000 00053175 c055001c c0543120 c05542f4 40008040 00000000 00000000
[ 9.700000] [<c025a3e0>] (uart_insert_char+0x38/0x130) from [<c0261700>] (mxs_auart_irq_handle+0x198/0x2b0)
[ 9.700000] [<c0261700>] (mxs_auart_irq_handle+0x198/0x2b0) from [<c0063e74>] (handle_irq_event_percpu+0x50/0x1c4)
[ 9.700000] [<c0063e74>] (handle_irq_event_percpu+0x50/0x1c4) from [<c006403c>] (handle_irq_event+0x54/0x84)
[ 9.700000] [<c006403c>] (handle_irq_event+0x54/0x84) from [<c00662dc>] (handle_level_irq+0x98/0x14c)
[ 9.700000] [<c00662dc>] (handle_level_irq+0x98/0x14c) from [<c00637b0>] (generic_handle_irq+0x20/0x30)
[ 9.700000] [<c00637b0>] (generic_handle_irq+0x20/0x30) from [<c000ffec>] (handle_IRQ+0x30/0x84)
[ 9.700000] [<c000ffec>] (handle_IRQ+0x30/0x84) from [<c0008778>] (icoll_handle_irq+0x34/0x48)
[ 9.700000] [<c0008778>] (icoll_handle_irq+0x34/0x48) from [<c000eda0>] (__irq_svc+0x40/0x6c)
[ 9.700000] Exception stack(0xc0549f68 to 0xc0549fb0)
[ 9.700000] 9f60: 00000000 0005317f 0005217f 60000013 c0548000 c05875a8
[ 9.700000] 9f80: c0554300 c0644480 40004000 41069265 40541cd8 00000000 600000d3 c0549fb0
[ 9.700000] 9fa0: c0010138 c0010144 60000013 ffffffff
[ 9.700000] [<c000eda0>] (__irq_svc+0x40/0x6c) from [<c0010144>] (default_idle+0x38/0x40)
[ 9.700000] [<c0010144>] (default_idle+0x38/0x40) from [<c0010308>] (cpu_idle+0x9c/0xd4)
[ 9.700000] [<c0010308>] (cpu_idle+0x9c/0xd4) from [<c0522700>] (start_kernel+0x264/0x2a4)
[ 9.700000] [<c0522700>] (start_kernel+0x264/0x2a4) from [<40008040>] (0x40008040)
[ 9.700000] Code: 1a000012 e59d2020 e5cd3006 e5cd2007 (e5973118)
[ 9.700000] ---[ end trace 179ba7640a9ebb7c ]---
[ 9.700000] Kernel panic - not syncing: Fatal exception in interrupt
^ permalink raw reply [flat|nested] 5+ messages in thread
* Kernel panic in mxs_auart_irq_handle with latest kernel?
2012-10-05 23:58 Kernel panic in mxs_auart_irq_handle with latest kernel? Subodh Nijsure
@ 2012-10-08 7:45 ` Uwe Kleine-König
2012-10-08 8:07 ` Russell King - ARM Linux
0 siblings, 1 reply; 5+ messages in thread
From: Uwe Kleine-König @ 2012-10-08 7:45 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Oct 05, 2012 at 11:58:26PM +0000, Subodh Nijsure wrote:
>
> On my MX28 based board with top of the Linus's git tree I am consistently getting following kernel panic, anybody else seen this?
> (I will start bisecting and see if I can find a reason this wknd)
>
> -Subodh
>
This dump is not complete, there is at least a line missing that reads
[ $timestamp] pgd = ....
It's a good habit to always provide the full info.
> [ 9.700000] [00000118] *pgd=00000000
> [ 9.700000] Internal error: Oops: 5 [#1] PREEMPT ARM
> [ 9.700000] Modules linked in:
> [ 9.700000] CPU: 0 Not tainted (3.6.0-11641-gbe4ae13-dirty #1)
> [ 9.700000] PC is at uart_insert_char+0x38/0x130
> [ 9.700000] LR is at mxs_auart_irq_handle+0x198/0x2b0
> [ 9.700000] pc : [<c025a3e0>] lr : [<c0261700>] psr: 40000093
> [ 9.700000] sp : c0549ea0 ip : 00000000 fp : 00000001
> [ 9.700000] r10: 00000000 r9 : c057e64e r8 : 00000020
> [ 9.700000] r7 : 00000000 r6 : 00080000 r5 : 00000000 r4 : c39566c0
> [ 9.700000] r3 : 00000020 r2 : 00000000 r1 : 00000000 r0 : 00000000
I don't see what should access the address 0x118 here, can you please
provide the output of
objdump -d vmlinux | sed -nr '/^[0-9]{8} <uart_insert_char/,/^$/p'
Best regards
Uwe
> [ 9.700000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
> [ 9.700000] Control: 0005317f Table: 40004000 DAC: 00000017
> [ 9.700000] Process swapper (pid: 0, stack limit = 0xc0548270)
> [ 9.700000] Stack: (0xc0549ea0 to 0xc054a000)
> [ 9.700000] 9ea0: c0554c00 00200002 00000000 c39566c0 00000000 0052006d 0052006d c0261700
> [ 9.700000] 9ec0: 00000000 c0548000 c398f980 c0548000 00000000 00000000 000000d3 c057e64e
> [ 9.700000] 9ee0: c387d700 c0063e74 ffffffff 20000093 00000002 c387d700 c0548000 00000000
> [ 9.700000] 9f00: c0549f9c 40004000 41069265 40541cd8 00000000 c006403c 427c4747 00000002
> [ 9.700000] 9f20: c0548000 c0548000 c387d700 c00662dc 000000d3 000000d3 00000000 c00637b0
> [ 9.700000] 9f40: c0568748 c000ffec f5000000 c0549f68 c0587814 c0008778 c0010144 60000013
> [ 9.700000] 9f60: ffffffff c000eda0 00000000 0005317f 0005217f 60000013 c0548000 c05875a8
> [ 9.700000] 9f80: c0554300 c0644480 40004000 41069265 40541cd8 00000000 600000d3 c0549fb0
> [ 9.700000] 9fa0: c0010138 c0010144 60000013 ffffffff 60000093 c0010308 c05500a8 c0587520
> [ 9.700000] 9fc0: c0543150 c0522700 ffffffff ffffffff c05221d0 00000000 00000000 c0543150
> [ 9.700000] 9fe0: 00000000 00053175 c055001c c0543120 c05542f4 40008040 00000000 00000000
> [ 9.700000] [<c025a3e0>] (uart_insert_char+0x38/0x130) from [<c0261700>] (mxs_auart_irq_handle+0x198/0x2b0)
> [ 9.700000] [<c0261700>] (mxs_auart_irq_handle+0x198/0x2b0) from [<c0063e74>] (handle_irq_event_percpu+0x50/0x1c4)
> [ 9.700000] [<c0063e74>] (handle_irq_event_percpu+0x50/0x1c4) from [<c006403c>] (handle_irq_event+0x54/0x84)
> [ 9.700000] [<c006403c>] (handle_irq_event+0x54/0x84) from [<c00662dc>] (handle_level_irq+0x98/0x14c)
> [ 9.700000] [<c00662dc>] (handle_level_irq+0x98/0x14c) from [<c00637b0>] (generic_handle_irq+0x20/0x30)
> [ 9.700000] [<c00637b0>] (generic_handle_irq+0x20/0x30) from [<c000ffec>] (handle_IRQ+0x30/0x84)
> [ 9.700000] [<c000ffec>] (handle_IRQ+0x30/0x84) from [<c0008778>] (icoll_handle_irq+0x34/0x48)
> [ 9.700000] [<c0008778>] (icoll_handle_irq+0x34/0x48) from [<c000eda0>] (__irq_svc+0x40/0x6c)
> [ 9.700000] Exception stack(0xc0549f68 to 0xc0549fb0)
> [ 9.700000] 9f60: 00000000 0005317f 0005217f 60000013 c0548000 c05875a8
> [ 9.700000] 9f80: c0554300 c0644480 40004000 41069265 40541cd8 00000000 600000d3 c0549fb0
> [ 9.700000] 9fa0: c0010138 c0010144 60000013 ffffffff
> [ 9.700000] [<c000eda0>] (__irq_svc+0x40/0x6c) from [<c0010144>] (default_idle+0x38/0x40)
> [ 9.700000] [<c0010144>] (default_idle+0x38/0x40) from [<c0010308>] (cpu_idle+0x9c/0xd4)
> [ 9.700000] [<c0010308>] (cpu_idle+0x9c/0xd4) from [<c0522700>] (start_kernel+0x264/0x2a4)
> [ 9.700000] [<c0522700>] (start_kernel+0x264/0x2a4) from [<40008040>] (0x40008040)
> [ 9.700000] Code: 1a000012 e59d2020 e5cd3006 e5cd2007 (e5973118)
> [ 9.700000] ---[ end trace 179ba7640a9ebb7c ]---
> [ 9.700000] Kernel panic - not syncing: Fatal exception in interrupt
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 5+ messages in thread
* Kernel panic in mxs_auart_irq_handle with latest kernel?
2012-10-08 7:45 ` Uwe Kleine-König
@ 2012-10-08 8:07 ` Russell King - ARM Linux
2012-10-08 8:24 ` Uwe Kleine-König
0 siblings, 1 reply; 5+ messages in thread
From: Russell King - ARM Linux @ 2012-10-08 8:07 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Oct 08, 2012 at 09:45:47AM +0200, Uwe Kleine-K?nig wrote:
> On Fri, Oct 05, 2012 at 11:58:26PM +0000, Subodh Nijsure wrote:
> >
> > On my MX28 based board with top of the Linus's git tree I am consistently getting following kernel panic, anybody else seen this?
> > (I will start bisecting and see if I can find a reason this wknd)
> >
> > -Subodh
> >
> This dump is not complete, there is at least a line missing that reads
>
> [ $timestamp] pgd = ....
>
> It's a good habit to always provide the full info.
>
> > [ 9.700000] [00000118] *pgd=00000000
Uwe, yes it is, it is the line above. It's saying that there is no
pgd entry at address 0x118 (which is correct.)
> > [ 9.700000] Internal error: Oops: 5 [#1] PREEMPT ARM
> > [ 9.700000] Modules linked in:
> > [ 9.700000] CPU: 0 Not tainted (3.6.0-11641-gbe4ae13-dirty #1)
> > [ 9.700000] PC is at uart_insert_char+0x38/0x130
> > [ 9.700000] LR is at mxs_auart_irq_handle+0x198/0x2b0
> > [ 9.700000] pc : [<c025a3e0>] lr : [<c0261700>] psr: 40000093
> > [ 9.700000] sp : c0549ea0 ip : 00000000 fp : 00000001
> > [ 9.700000] r10: 00000000 r9 : c057e64e r8 : 00000020
> > [ 9.700000] r7 : 00000000 r6 : 00080000 r5 : 00000000 r4 : c39566c0
> > [ 9.700000] r3 : 00000020 r2 : 00000000 r1 : 00000000 r0 : 00000000
> I don't see what should access the address 0x118 here, can you please
> provide the output of
>
> objdump -d vmlinux | sed -nr '/^[0-9]{8} <uart_insert_char/,/^$/p'
objdump -d vmlinux --start-addr=0xc025a3a8 | less
will give you the disassembly starting@uart_insert_char().
The faulting instruction is (which is below in the Code: line of the oops
dump):
e5973118
It's an "ldr r3, [r7, #280] ; 0x118" instruction. r7 is zero, and the
instruction has an pre-indexed offset of 0x118. _That_ is where 0x118
is coming from.
The full code line is:
28: 1a000012 bne 0x78
2c: e59d2020 ldr r2, [sp, #32]
30: e5cd3006 strb r3, [sp, #6]
34: e5cd2007 strb r2, [sp, #7]
38: e5973118 ldr r3, [r7, #280] ; 0x118
I suspect the problem is that the mxs serial driver is calling
uart_insert_char() when the port has been closed by userland, which
means there's no tty associated with it.
> Best regards
> Uwe
>
> > [ 9.700000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
> > [ 9.700000] Control: 0005317f Table: 40004000 DAC: 00000017
> > [ 9.700000] Process swapper (pid: 0, stack limit = 0xc0548270)
> > [ 9.700000] Stack: (0xc0549ea0 to 0xc054a000)
> > [ 9.700000] 9ea0: c0554c00 00200002 00000000 c39566c0 00000000 0052006d 0052006d c0261700
> > [ 9.700000] 9ec0: 00000000 c0548000 c398f980 c0548000 00000000 00000000 000000d3 c057e64e
> > [ 9.700000] 9ee0: c387d700 c0063e74 ffffffff 20000093 00000002 c387d700 c0548000 00000000
> > [ 9.700000] 9f00: c0549f9c 40004000 41069265 40541cd8 00000000 c006403c 427c4747 00000002
> > [ 9.700000] 9f20: c0548000 c0548000 c387d700 c00662dc 000000d3 000000d3 00000000 c00637b0
> > [ 9.700000] 9f40: c0568748 c000ffec f5000000 c0549f68 c0587814 c0008778 c0010144 60000013
> > [ 9.700000] 9f60: ffffffff c000eda0 00000000 0005317f 0005217f 60000013 c0548000 c05875a8
> > [ 9.700000] 9f80: c0554300 c0644480 40004000 41069265 40541cd8 00000000 600000d3 c0549fb0
> > [ 9.700000] 9fa0: c0010138 c0010144 60000013 ffffffff 60000093 c0010308 c05500a8 c0587520
> > [ 9.700000] 9fc0: c0543150 c0522700 ffffffff ffffffff c05221d0 00000000 00000000 c0543150
> > [ 9.700000] 9fe0: 00000000 00053175 c055001c c0543120 c05542f4 40008040 00000000 00000000
> > [ 9.700000] [<c025a3e0>] (uart_insert_char+0x38/0x130) from [<c0261700>] (mxs_auart_irq_handle+0x198/0x2b0)
> > [ 9.700000] [<c0261700>] (mxs_auart_irq_handle+0x198/0x2b0) from [<c0063e74>] (handle_irq_event_percpu+0x50/0x1c4)
> > [ 9.700000] [<c0063e74>] (handle_irq_event_percpu+0x50/0x1c4) from [<c006403c>] (handle_irq_event+0x54/0x84)
> > [ 9.700000] [<c006403c>] (handle_irq_event+0x54/0x84) from [<c00662dc>] (handle_level_irq+0x98/0x14c)
> > [ 9.700000] [<c00662dc>] (handle_level_irq+0x98/0x14c) from [<c00637b0>] (generic_handle_irq+0x20/0x30)
> > [ 9.700000] [<c00637b0>] (generic_handle_irq+0x20/0x30) from [<c000ffec>] (handle_IRQ+0x30/0x84)
> > [ 9.700000] [<c000ffec>] (handle_IRQ+0x30/0x84) from [<c0008778>] (icoll_handle_irq+0x34/0x48)
> > [ 9.700000] [<c0008778>] (icoll_handle_irq+0x34/0x48) from [<c000eda0>] (__irq_svc+0x40/0x6c)
> > [ 9.700000] Exception stack(0xc0549f68 to 0xc0549fb0)
> > [ 9.700000] 9f60: 00000000 0005317f 0005217f 60000013 c0548000 c05875a8
> > [ 9.700000] 9f80: c0554300 c0644480 40004000 41069265 40541cd8 00000000 600000d3 c0549fb0
> > [ 9.700000] 9fa0: c0010138 c0010144 60000013 ffffffff
> > [ 9.700000] [<c000eda0>] (__irq_svc+0x40/0x6c) from [<c0010144>] (default_idle+0x38/0x40)
> > [ 9.700000] [<c0010144>] (default_idle+0x38/0x40) from [<c0010308>] (cpu_idle+0x9c/0xd4)
> > [ 9.700000] [<c0010308>] (cpu_idle+0x9c/0xd4) from [<c0522700>] (start_kernel+0x264/0x2a4)
> > [ 9.700000] [<c0522700>] (start_kernel+0x264/0x2a4) from [<40008040>] (0x40008040)
> > [ 9.700000] Code: 1a000012 e59d2020 e5cd3006 e5cd2007 (e5973118)
> > [ 9.700000] ---[ end trace 179ba7640a9ebb7c ]---
> > [ 9.700000] Kernel panic - not syncing: Fatal exception in interrupt
>
> --
> Pengutronix e.K. | Uwe Kleine-K?nig |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Kernel panic in mxs_auart_irq_handle with latest kernel?
2012-10-08 8:07 ` Russell King - ARM Linux
@ 2012-10-08 8:24 ` Uwe Kleine-König
2012-10-08 20:55 ` Subodh Nijsure
0 siblings, 1 reply; 5+ messages in thread
From: Uwe Kleine-König @ 2012-10-08 8:24 UTC (permalink / raw)
To: linux-arm-kernel
Hello Russell,
On Mon, Oct 08, 2012 at 09:07:54AM +0100, Russell King - ARM Linux wrote:
> On Mon, Oct 08, 2012 at 09:45:47AM +0200, Uwe Kleine-K?nig wrote:
> > On Fri, Oct 05, 2012 at 11:58:26PM +0000, Subodh Nijsure wrote:
> > >
> > > On my MX28 based board with top of the Linus's git tree I am consistently getting following kernel panic, anybody else seen this?
> > > (I will start bisecting and see if I can find a reason this wknd)
> > >
> > > -Subodh
> > >
> > This dump is not complete, there is at least a line missing that reads
> >
> > [ $timestamp] pgd = ....
> >
> > It's a good habit to always provide the full info.
> >
> > > [ 9.700000] [00000118] *pgd=00000000
>
> Uwe, yes it is, it is the line above. It's saying that there is no
> pgd entry at address 0x118 (which is correct.)
I'm not sure I got you right, but show_pte() has:
printk(KERN_ALERT "pgd = %p\n", mm->pgd);
pgd = pgd_offset(mm, addr);
printk(KERN_ALERT "[%08lx] *pgd=%08llx",
addr, (long long)pgd_val(*pgd));
So there is indeed missing a line. I don't think it's essential here,
still I think in general it's advisable to let people know not to
shorten the output. Probably even let them post the complete kernel log.
(Isn't there an oops marker, too?)
> > > [ 9.700000] Internal error: Oops: 5 [#1] PREEMPT ARM
> > > [ 9.700000] Modules linked in:
> > > [ 9.700000] CPU: 0 Not tainted (3.6.0-11641-gbe4ae13-dirty #1)
> > > [ 9.700000] PC is at uart_insert_char+0x38/0x130
> > > [ 9.700000] LR is at mxs_auart_irq_handle+0x198/0x2b0
> > > [ 9.700000] pc : [<c025a3e0>] lr : [<c0261700>] psr: 40000093
> > > [ 9.700000] sp : c0549ea0 ip : 00000000 fp : 00000001
> > > [ 9.700000] r10: 00000000 r9 : c057e64e r8 : 00000020
> > > [ 9.700000] r7 : 00000000 r6 : 00080000 r5 : 00000000 r4 : c39566c0
> > > [ 9.700000] r3 : 00000020 r2 : 00000000 r1 : 00000000 r0 : 00000000
> > I don't see what should access the address 0x118 here, can you please
> > provide the output of
> >
> > objdump -d vmlinux | sed -nr '/^[0-9]{8} <uart_insert_char/,/^$/p'
>
> objdump -d vmlinux --start-addr=0xc025a3a8 | less
>
> will give you the disassembly starting at uart_insert_char().
>
> The faulting instruction is (which is below in the Code: line of the oops
> dump):
Ah, I already knew some time ago that the code is included in the dump,
I just did miss it because there are no address infos included there.
>
> e5973118
>
> It's an "ldr r3, [r7, #280] ; 0x118" instruction. r7 is zero, and the
> instruction has an pre-indexed offset of 0x118. _That_ is where 0x118
> is coming from.
obviously.
> The full code line is:
>
> 28: 1a000012 bne 0x78
> 2c: e59d2020 ldr r2, [sp, #32]
> 30: e5cd3006 strb r3, [sp, #6]
> 34: e5cd2007 strb r2, [sp, #7]
> 38: e5973118 ldr r3, [r7, #280] ; 0x118
>
> I suspect the problem is that the mxs serial driver is calling
> uart_insert_char() when the port has been closed by userland, which
> means there's no tty associated with it.
Thanks for your insights. At least my mail wasn't for nothing because I
learned again something about oopses.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 5+ messages in thread
* Kernel panic in mxs_auart_irq_handle with latest kernel?
2012-10-08 8:24 ` Uwe Kleine-König
@ 2012-10-08 20:55 ` Subodh Nijsure
0 siblings, 0 replies; 5+ messages in thread
From: Subodh Nijsure @ 2012-10-08 20:55 UTC (permalink / raw)
To: linux-arm-kernel
On 10/08/2012 01:24 AM, Uwe Kleine-K?nig wrote:
> Hello Russell,
>
> On Mon, Oct 08, 2012 at 09:07:54AM +0100, Russell King - ARM Linux wrote:
>> On Mon, Oct 08, 2012 at 09:45:47AM +0200, Uwe Kleine-K?nig wrote:
>>> On Fri, Oct 05, 2012 at 11:58:26PM +0000, Subodh Nijsure wrote:
>>>> On my MX28 based board with top of the Linus's git tree I am consistently getting following kernel panic, anybody else seen this?
>>>> (I will start bisecting and see if I can find a reason this wknd)
>>>>
>>>> -Subodh
>>>>
>>> This dump is not complete, there is at least a line missing that reads
>>>
>>> [ $timestamp] pgd = ....
>>>
>>> It's a good habit to always provide the full info.
>>>
>>>> [ 9.700000] [00000118] *pgd=00000000
>> Uwe, yes it is, it is the line above. It's saying that there is no
>> pgd entry at address 0x118 (which is correct.)
> I'm not sure I got you right, but show_pte() has:
>
> printk(KERN_ALERT "pgd = %p\n", mm->pgd);
> pgd = pgd_offset(mm, addr);
> printk(KERN_ALERT "[%08lx] *pgd=%08llx",
> addr, (long long)pgd_val(*pgd));
>
> So there is indeed missing a line. I don't think it's essential here,
> still I think in general it's advisable to let people know not to
> shorten the output. Probably even let them post the complete kernel log.
> (Isn't there an oops marker, too?)
>
>>>> [ 9.700000] Internal error: Oops: 5 [#1] PREEMPT ARM
>>>> [ 9.700000] Modules linked in:
>>>> [ 9.700000] CPU: 0 Not tainted (3.6.0-11641-gbe4ae13-dirty #1)
>>>> [ 9.700000] PC is at uart_insert_char+0x38/0x130
>>>> [ 9.700000] LR is at mxs_auart_irq_handle+0x198/0x2b0
>>>> [ 9.700000] pc : [<c025a3e0>] lr : [<c0261700>] psr: 40000093
>>>> [ 9.700000] sp : c0549ea0 ip : 00000000 fp : 00000001
>>>> [ 9.700000] r10: 00000000 r9 : c057e64e r8 : 00000020
>>>> [ 9.700000] r7 : 00000000 r6 : 00080000 r5 : 00000000 r4 : c39566c0
>>>> [ 9.700000] r3 : 00000020 r2 : 00000000 r1 : 00000000 r0 : 00000000
>>> I don't see what should access the address 0x118 here, can you please
>>> provide the output of
>>>
>>> objdump -d vmlinux | sed -nr '/^[0-9]{8} <uart_insert_char/,/^$/p'
>> objdump -d vmlinux --start-addr=0xc025a3a8 | less
>>
>> will give you the disassembly starting at uart_insert_char().
>>
>> The faulting instruction is (which is below in the Code: line of the oops
>> dump):
> Ah, I already knew some time ago that the code is included in the dump,
> I just did miss it because there are no address infos included there.
>
>> e5973118
>>
>> It's an "ldr r3, [r7, #280] ; 0x118" instruction. r7 is zero, and the
>> instruction has an pre-indexed offset of 0x118. _That_ is where 0x118
>> is coming from.
> obviously.
>
>> The full code line is:
>>
>> 28: 1a000012 bne 0x78
>> 2c: e59d2020 ldr r2, [sp, #32]
>> 30: e5cd3006 strb r3, [sp, #6]
>> 34: e5cd2007 strb r2, [sp, #7]
>> 38: e5973118 ldr r3, [r7, #280] ; 0x118
>>
>> I suspect the problem is that the mxs serial driver is calling
>> uart_insert_char() when the port has been closed by userland, which
>> means there's no tty associated with it.
> Thanks for your insights. At least my mail wasn't for nothing because I
> learned again something about oopses.
My apologies. Problem that I came across was caused by some other
vendor driver for a wireless device that is on this board.
As soon as I disable that driver I don't see this kernel panic.
-Subodh
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2012-10-08 20:55 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-10-05 23:58 Kernel panic in mxs_auart_irq_handle with latest kernel? Subodh Nijsure
2012-10-08 7:45 ` Uwe Kleine-König
2012-10-08 8:07 ` Russell King - ARM Linux
2012-10-08 8:24 ` Uwe Kleine-König
2012-10-08 20:55 ` Subodh Nijsure
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).