From: arnd@arndb.de (Arnd Bergmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] pinctrl: sirf: remove sirfsoc_gpio_set_pull function
Date: Tue, 9 Oct 2012 15:35:56 +0000 [thread overview]
Message-ID: <201210091535.56487.arnd@arndb.de> (raw)
The prima2 platform advertises needing no mach/gpio.h header file,
but its pinctrl driver now has a sirfsoc_gpio_set_pull function
that uses constants defined in arch/arm/mach-prima2/include/mach/gpio.h,
which fails to build.
Fortunately, the sirfsoc_gpio_set_pull is not used anywhere in the
kernel, so we can safely remove it. Any out of tree drivers using
it will have to be converted to use proper pinctrl functions to
do the same.
Without this patch, building prima2_defconfig results in:
drivers/pinctrl/pinctrl-sirf.c: In function 'sirfsoc_gpio_set_pull':
drivers/pinctrl/pinctrl-sirf.c:1331:7: error: 'SIRFSOC_GPIO_PULL_NONE' undeclared (first use in this function)
drivers/pinctrl/pinctrl-sirf.c:1331:7: note: each undeclared identifier is reported only once for each function it appears in
drivers/pinctrl/pinctrl-sirf.c:1334:7: error: 'SIRFSOC_GPIO_PULL_UP' undeclared (first use in this function)
drivers/pinctrl/pinctrl-sirf.c:1338:7: error: 'SIRFSOC_GPIO_PULL_DOWN' undeclared (first use in this function)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Barry Song <Baohua.Song@csr.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
diff --git a/arch/arm/mach-prima2/include/mach/gpio.h b/arch/arm/mach-prima2/include/mach/gpio.h
deleted file mode 100644
index 1904bb0..0000000
--- a/arch/arm/mach-prima2/include/mach/gpio.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __MACH_GPIO_H
-#define __MACH_GPIO_H
-
-/* Pull up/down values */
-enum sirfsoc_gpio_pull {
- SIRFSOC_GPIO_PULL_NONE,
- SIRFSOC_GPIO_PULL_UP,
- SIRFSOC_GPIO_PULL_DOWN,
-};
-
-void sirfsoc_gpio_set_pull(unsigned gpio, unsigned mode);
-
-#endif
diff --git a/drivers/pinctrl/pinctrl-sirf.c b/drivers/pinctrl/pinctrl-sirf.c
index 675497c..9ecacf3 100644
--- a/drivers/pinctrl/pinctrl-sirf.c
+++ b/drivers/pinctrl/pinctrl-sirf.c
@@ -1323,41 +1323,6 @@ static inline struct sirfsoc_gpio_bank *sirfsoc_gpio_to_bank(unsigned int gpio)
return &sgpio_bank[gpio / SIRFSOC_GPIO_BANK_SIZE];
}
-void sirfsoc_gpio_set_pull(unsigned gpio, unsigned mode)
-{
- struct sirfsoc_gpio_bank *bank = sirfsoc_gpio_to_bank(gpio);
- int idx = sirfsoc_gpio_to_offset(gpio);
- u32 val, offset;
- unsigned long flags;
-
- offset = SIRFSOC_GPIO_CTRL(bank->id, idx);
-
- spin_lock_irqsave(&sgpio_lock, flags);
-
- val = readl(bank->chip.regs + offset);
-
- switch (mode) {
- case SIRFSOC_GPIO_PULL_NONE:
- val &= ~SIRFSOC_GPIO_CTL_PULL_MASK;
- break;
- case SIRFSOC_GPIO_PULL_UP:
- val |= SIRFSOC_GPIO_CTL_PULL_MASK;
- val |= SIRFSOC_GPIO_CTL_PULL_HIGH;
- break;
- case SIRFSOC_GPIO_PULL_DOWN:
- val |= SIRFSOC_GPIO_CTL_PULL_MASK;
- val &= ~SIRFSOC_GPIO_CTL_PULL_HIGH;
- break;
- default:
- break;
- }
-
- writel(val, bank->chip.regs + offset);
-
- spin_unlock_irqrestore(&sgpio_lock, flags);
-}
-EXPORT_SYMBOL(sirfsoc_gpio_set_pull);
-
static inline struct sirfsoc_gpio_bank *sirfsoc_irqchip_to_bank(struct gpio_chip *chip)
{
return container_of(to_of_mm_gpio_chip(chip), struct sirfsoc_gpio_bank, chip);
next reply other threads:[~2012-10-09 15:35 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-09 15:35 Arnd Bergmann [this message]
2012-10-09 16:31 ` [PATCH] pinctrl: sirf: remove sirfsoc_gpio_set_pull function Barry Song
2012-10-10 7:53 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201210091535.56487.arnd@arndb.de \
--to=arnd@arndb.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox