* [PATCH v3] video: imxfb: Do not crash on reboot
@ 2012-10-09 13:32 Fabio Estevam
2012-10-10 7:27 ` Sascha Hauer
0 siblings, 1 reply; 2+ messages in thread
From: Fabio Estevam @ 2012-10-09 13:32 UTC (permalink / raw)
To: linux-arm-kernel
Issuing a "reboot" command after the LCD times out causes the following
warnings:
Requesting system reboot
------------[ cut here ]------------
WARNING: at drivers/clk/clk.c:471 clk_disable+0x24/0x50()
Modules linked in:
[<c001ad90>] (unwind_backtrace+0x0/0xf4) from [<c0025aac>] (warn_slowpath_common+0x48/0x60)
[<c0025aac>] (warn_slowpath_common+0x48/0x60) from [<c0025ae0>] (warn_slowpath_null+0x1c/0x24)
[<c0025ae0>] (warn_slowpath_null+0x1c/0x24) from [<c03960a0>] (clk_disable+0x24/0x50)
[<c03960a0>] (clk_disable+0x24/0x50) from [<c02695a0>] (imxfb_disable_controller+0x48/0x7c)
[<c02695a0>] (imxfb_disable_controller+0x48/0x7c) from [<c029d838>] (platform_drv_shutdown+0x18/0x1c)
[<c029d838>] (platform_drv_shutdown+0x18/0x1c) from [<c02990fc>] (device_shutdown+0x48/0x14c)
[<c02990fc>] (device_shutdown+0x48/0x14c) from [<c003d09c>] (kernel_restart_prepare+0x2c/0x3c)
[<c003d09c>] (kernel_restart_prepare+0x2c/0x3c) from [<c003d0e4>] (kernel_restart+0xc/0x48)
[<c003d0e4>] (kernel_restart+0xc/0x48) from [<c003d1e8>] (sys_reboot+0xc0/0x1bc)
[<c003d1e8>] (sys_reboot+0xc0/0x1bc) from [<c0014ca0>] (ret_fast_syscall+0x0/0x2c)
---[ end trace da6b502ca79c854f ]---
------------[ cut here ]------------
WARNING: at drivers/clk/clk.c:380 clk_unprepare+0x1c/0x2c()
Modules linked in:
[<c001ad90>] (unwind_backtrace+0x0/0xf4) from [<c0025aac>] (warn_slowpath_common+0x48/0x60)
[<c0025aac>] (warn_slowpath_common+0x48/0x60) from [<c0025ae0>] (warn_slowpath_null+0x1c/0x24)
[<c0025ae0>] (warn_slowpath_null+0x1c/0x24) from [<c0396338>] (clk_unprepare+0x1c/0x2c)
[<c0396338>] (clk_unprepare+0x1c/0x2c) from [<c02695a8>] (imxfb_disable_controller+0x50/0x7c)
[<c02695a8>] (imxfb_disable_controller+0x50/0x7c) from [<c029d838>] (platform_drv_shutdown+0x18/0x1c)
[<c029d838>] (platform_drv_shutdown+0x18/0x1c) from [<c02990fc>] (device_shutdown+0x48/0x14c)
[<c02990fc>] (device_shutdown+0x48/0x14c) from [<c003d09c>] (kernel_restart_prepare+0x2c/0x3c)
[<c003d09c>] (kernel_restart_prepare+0x2c/0x3c) from [<c003d0e4>] (kernel_restart+0xc/0x48)
[<c003d0e4>] (kernel_restart+0xc/0x48) from [<c003d1e8>] (sys_reboot+0xc0/0x1bc)
[<c003d1e8>] (sys_reboot+0xc0/0x1bc) from [<c0014ca0>] (ret_fast_syscall+0x0/0x2c)
---[ end trace da6b502ca79c8550 ]---
------------[ cut here ]------------
This happens because "reboot" triggers imxfb_shutdown(), which calls
imxfb_disable_controller with the clocks already disabled.
To prevent this, add a clock enabled status so that we can check if the clocks
are enabled before disabling them.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v2:
- Use a better naming for the clk enabled variable
- Return immediately in imxfb_enable_controller/imxfb_disable_controller
if the the clocks are already enabled/disabled.
Changes since v1:
- Protect the whole function instead of only the clocks
drivers/video/imxfb.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index cf2688d..e0d770f 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -134,6 +134,7 @@ struct imxfb_info {
struct clk *clk_ipg;
struct clk *clk_ahb;
struct clk *clk_per;
+ int clks_enabled;
/*
* These are the addresses we mapped
@@ -513,6 +514,9 @@ static void imxfb_exit_backlight(struct imxfb_info *fbi)
static void imxfb_enable_controller(struct imxfb_info *fbi)
{
+ if (fbi->clks_enabled)
+ return;
+
pr_debug("Enabling LCD controller\n");
writel(fbi->screen_dma, fbi->regs + LCDC_SSA);
@@ -533,6 +537,7 @@ static void imxfb_enable_controller(struct imxfb_info *fbi)
clk_prepare_enable(fbi->clk_ipg);
clk_prepare_enable(fbi->clk_ahb);
clk_prepare_enable(fbi->clk_per);
+ fbi->clks_enabled = 1;
if (fbi->backlight_power)
fbi->backlight_power(1);
@@ -542,6 +547,9 @@ static void imxfb_enable_controller(struct imxfb_info *fbi)
static void imxfb_disable_controller(struct imxfb_info *fbi)
{
+ if (!fbi->clks_enabled)
+ return;
+
pr_debug("Disabling LCD controller\n");
if (fbi->backlight_power)
@@ -552,6 +560,7 @@ static void imxfb_disable_controller(struct imxfb_info *fbi)
clk_disable_unprepare(fbi->clk_per);
clk_disable_unprepare(fbi->clk_ipg);
clk_disable_unprepare(fbi->clk_ahb);
+ fbi->clks_enabled = 0;
writel(0, fbi->regs + LCDC_RMCR);
}
--
1.7.9.5
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH v3] video: imxfb: Do not crash on reboot
2012-10-09 13:32 [PATCH v3] video: imxfb: Do not crash on reboot Fabio Estevam
@ 2012-10-10 7:27 ` Sascha Hauer
0 siblings, 0 replies; 2+ messages in thread
From: Sascha Hauer @ 2012-10-10 7:27 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Oct 09, 2012 at 10:32:21AM -0300, Fabio Estevam wrote:
> Issuing a "reboot" command after the LCD times out causes the following
> warnings:
>
> This happens because "reboot" triggers imxfb_shutdown(), which calls
> imxfb_disable_controller with the clocks already disabled.
>
> To prevent this, add a clock enabled status so that we can check if the clocks
> are enabled before disabling them.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> Changes since v2:
> - Use a better naming for the clk enabled variable
This is probably due to Uwes comment. At that time the enabled variable
tracked the clk state. Now it tracks the state of the whole controller,
so indeed enabled or maybe fb_enabled would be better.
Anyway, this is only nitpicking, so:
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
> - Return immediately in imxfb_enable_controller/imxfb_disable_controller
> if the the clocks are already enabled/disabled.
> Changes since v1:
> - Protect the whole function instead of only the clocks
> drivers/video/imxfb.c | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
> index cf2688d..e0d770f 100644
> --- a/drivers/video/imxfb.c
> +++ b/drivers/video/imxfb.c
> @@ -134,6 +134,7 @@ struct imxfb_info {
> struct clk *clk_ipg;
> struct clk *clk_ahb;
> struct clk *clk_per;
> + int clks_enabled;
>
> /*
> * These are the addresses we mapped
> @@ -513,6 +514,9 @@ static void imxfb_exit_backlight(struct imxfb_info *fbi)
>
> static void imxfb_enable_controller(struct imxfb_info *fbi)
> {
> + if (fbi->clks_enabled)
> + return;
> +
> pr_debug("Enabling LCD controller\n");
>
> writel(fbi->screen_dma, fbi->regs + LCDC_SSA);
> @@ -533,6 +537,7 @@ static void imxfb_enable_controller(struct imxfb_info *fbi)
> clk_prepare_enable(fbi->clk_ipg);
> clk_prepare_enable(fbi->clk_ahb);
> clk_prepare_enable(fbi->clk_per);
> + fbi->clks_enabled = 1;
>
> if (fbi->backlight_power)
> fbi->backlight_power(1);
> @@ -542,6 +547,9 @@ static void imxfb_enable_controller(struct imxfb_info *fbi)
>
> static void imxfb_disable_controller(struct imxfb_info *fbi)
> {
> + if (!fbi->clks_enabled)
> + return;
> +
> pr_debug("Disabling LCD controller\n");
>
> if (fbi->backlight_power)
> @@ -552,6 +560,7 @@ static void imxfb_disable_controller(struct imxfb_info *fbi)
> clk_disable_unprepare(fbi->clk_per);
> clk_disable_unprepare(fbi->clk_ipg);
> clk_disable_unprepare(fbi->clk_ahb);
> + fbi->clks_enabled = 0;
>
> writel(0, fbi->regs + LCDC_RMCR);
> }
> --
> 1.7.9.5
>
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-10-10 7:27 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-10-09 13:32 [PATCH v3] video: imxfb: Do not crash on reboot Fabio Estevam
2012-10-10 7:27 ` Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).