linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: mx27_3ds: Reserve memory for camera usage
Date: Wed, 10 Oct 2012 09:52:22 +0200	[thread overview]
Message-ID: <20121010075222.GN27665@pengutronix.de> (raw)
In-Reply-To: <1349839770-13848-1-git-send-email-festevam@gmail.com>

On Wed, Oct 10, 2012 at 12:29:29AM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
> 
> Reserve dedicated memory block for camera usage.

Why not use CMA?

Sascha

> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
>  arch/arm/mach-imx/mach-mx27_3ds.c |   32 +++++++++++++++++++++++++++++++-
>  1 file changed, 31 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
> index 05996f3..d3b9a60 100644
> --- a/arch/arm/mach-imx/mach-mx27_3ds.c
> +++ b/arch/arm/mach-imx/mach-mx27_3ds.c
> @@ -30,6 +30,7 @@
>  #include <linux/spi/spi.h>
>  #include <linux/regulator/machine.h>
>  #include <linux/spi/l4f00242t03.h>
> +#include <asm/memblock.h>
>  
>  #include <media/soc_camera.h>
>  
> @@ -165,6 +166,9 @@ static const int mx27pdk_pins[] __initconst = {
>  	PC19_PF_SSI4_CLK,
>  };
>  
> +static phys_addr_t mx2_camera_base __initdata;
> +#define MX27PDK_CAM_BUF_SIZE	SZ_8M
> +
>  static struct gpio mx27_3ds_camera_gpios[] = {
>  	{ CSI_PWRDWN, GPIOF_OUT_INIT_HIGH, "camera-power" },
>  	{ CSI_RESET, GPIOF_OUT_INIT_HIGH, "camera-reset" },
> @@ -478,6 +482,24 @@ static const struct mx2_camera_platform_data mx27_3ds_cam_pdata __initconst = {
>  	.clk = 26000000,
>  };
>  
> +static void __init mx27pdk_init_camera(void)
> +{
> +	struct platform_device *pdev;
> +	int dma;
> +
> +	pdev = imx27_add_mx2_camera(&mx27_3ds_cam_pdata);
> +
> +	if (IS_ERR(pdev))
> +		return;
> +
> +	dma = dma_declare_coherent_memory(&pdev->dev,
> +				mx2_camera_base, mx2_camera_base,
> +				MX27PDK_CAM_BUF_SIZE,
> +				DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
> +	if (!(dma & DMA_MEMORY_MAP))
> +		return;
> +}
> +
>  static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = {
>  	.bitrate = 100000,
>  };
> @@ -527,7 +549,7 @@ static void __init mx27pdk_init(void)
>  		iclink_ov2640.power = NULL;
>  	}
>  
> -	imx27_add_mx2_camera(&mx27_3ds_cam_pdata);
> +	mx27pdk_init_camera();
>  	imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata);
>  
>  	imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
> @@ -542,6 +564,13 @@ static struct sys_timer mx27pdk_timer = {
>  	.init	= mx27pdk_timer_init,
>  };
>  
> +static void __init mx27pdk_reserve(void)
> +{
> +	/* reserve MX27_3DS_CAMERA_BUF_SIZE bytes for mx2-camera */
> +	mx2_camera_base = arm_memblock_steal(MX27PDK_CAM_BUF_SIZE,
> +						MX27PDK_CAM_BUF_SIZE);
> +}
> +
>  MACHINE_START(MX27_3DS, "Freescale MX27PDK")
>  	/* maintainer: Freescale Semiconductor, Inc. */
>  	.atag_offset = 0x100,
> @@ -551,5 +580,6 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK")
>  	.handle_irq = imx27_handle_irq,
>  	.timer = &mx27pdk_timer,
>  	.init_machine = mx27pdk_init,
> +	.reserve = mx27pdk_reserve,
>  	.restart	= mxc_restart,
>  MACHINE_END
> -- 
> 1.7.9.5
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

  parent reply	other threads:[~2012-10-10  7:52 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-10  3:29 [PATCH 1/2] ARM: mx27_3ds: Reserve memory for camera usage Fabio Estevam
2012-10-10  3:29 ` [PATCH 2/2] ARM: mx27_3ds: Add VPU support Fabio Estevam
2012-10-10  6:51 ` [PATCH 1/2] ARM: mx27_3ds: Reserve memory for camera usage Gaëtan Carlier
2012-10-10  7:52 ` Sascha Hauer [this message]
2012-10-16  4:08   ` Fabio Estevam
2012-10-16  7:13     ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20121010075222.GN27665@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).