linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: dmitry.torokhov@gmail.com (Dmitry Torokhov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 07/10] input: Enable STMPE keypad driver for Device Tree
Date: Wed, 10 Oct 2012 09:50:04 -0700	[thread overview]
Message-ID: <20121010165004.GE19335@core.coreip.homeip.net> (raw)
In-Reply-To: <1349451107-8009-8-git-send-email-lee.jones@linaro.org>

Hi Lee,

On Fri, Oct 05, 2012 at 04:31:43PM +0100, Lee Jones wrote:
> This patch allows the STMPE driver to be successfully probed and
> initialised when Device Tree support is enabled. Besides the usual
> platform data changes, we also separate the process of filling in
> the 'in use' pin bitmap, as we have to extract the information from
> Device Tree in the DT boot case.


This generally looks OK although I wonder if we could not unify DT and
non-DT case by doing:

	for (row = 0; row < STMPE_KEYPAD_MAX_ROWS; row++) {
		if (col = 0; col < STMPE_KEYPAD_MAX_COLS; col++) {
			int code = MATRIX_SCAN_CODE(row, col,
						STMPE_KEYPAD_ROW_SHIFT);
			if (keypad->keymap[code] != KEY_RESERVED) {
				keypad->rows |= 1 << row;
				keypad->cols |= 1 << col;
			}
		}
	}

BTW, am I supposed to merge it or ack it?

Thanks!

> 
> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> Cc: linux-input at vger.kernel.org
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
>  drivers/input/keyboard/stmpe-keypad.c |   67 ++++++++++++++++++++++++++++-----
>  drivers/mfd/stmpe.c                   |    1 +
>  2 files changed, 59 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/input/keyboard/stmpe-keypad.c b/drivers/input/keyboard/stmpe-keypad.c
> index 470a877..c722d23 100644
> --- a/drivers/input/keyboard/stmpe-keypad.c
> +++ b/drivers/input/keyboard/stmpe-keypad.c
> @@ -257,19 +257,73 @@ static int __devinit stmpe_keypad_chip_init(struct stmpe_keypad *keypad)
>  			      (plat->debounce_ms << 1));
>  }
>  
> +static int stmpe_keypad_fill_used_pins(struct platform_device *pdev,
> +				struct stmpe_keypad *keypad,
> +				struct stmpe_keypad_platform_data *plat)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	unsigned int proplen;
> +	const __be32 *prop;
> +	int i;
> +
> +	if (np) {
> +		prop = of_get_property(np, "linux,keymap", &proplen);
> +		if (!prop) {
> +			dev_err(&pdev->dev,
> +				"linux,keymap property not defined\n");
> +			return -EINVAL;
> +		}
> +
> +		for (i = 0; i < proplen / sizeof(u32); i++) {
> +			unsigned int key = be32_to_cpup(prop + i);
> +
> +			keypad->cols |= 1 << KEY_COL(key);
> +			keypad->rows |= 1 << KEY_ROW(key);
> +		}
> +	} else {
> +		for (i = 0; i < plat->keymap_data->keymap_size; i++) {
> +			unsigned int key = plat->keymap_data->keymap[i];
> +
> +			keypad->cols |= 1 << KEY_COL(key);
> +			keypad->rows |= 1 << KEY_ROW(key);
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static void __devinit stmpe_keypad_of_probe(struct device_node *np,
> +				struct stmpe_keypad_platform_data *plat)
> +{
> +	of_property_read_u32(np, "debounce-interval", &plat->debounce_ms);
> +	of_property_read_u32(np, "stericsson,scan-count", &plat->scan_count);
> +
> +	if (of_get_property(np, "stericsson,no-autorepeat", NULL))
> +		plat->no_autorepeat = true;
> +}
> +
>  static int __devinit stmpe_keypad_probe(struct platform_device *pdev)
>  {
>  	struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
>  	struct stmpe_keypad_platform_data *plat;
> +	struct device_node *np = pdev->dev.of_node;
>  	struct stmpe_keypad *keypad;
>  	struct input_dev *input;
>  	int ret;
>  	int irq;
> -	int i;
>  
>  	plat = stmpe->pdata->keypad;
> -	if (!plat)
> -		return -ENODEV;
> +	if (!plat) {
> +		if (np) {
> +			plat = devm_kzalloc(&pdev->dev,
> +					sizeof(*plat), GFP_KERNEL);
> +			if (!plat)
> +				return -ENOMEM;
> +
> +			stmpe_keypad_of_probe(np, plat);
> +		} else
> +			return -ENODEV;
> +	}
>  
>  	irq = platform_get_irq(pdev, 0);
>  	if (irq < 0)
> @@ -300,12 +354,7 @@ static int __devinit stmpe_keypad_probe(struct platform_device *pdev)
>  	if (!plat->no_autorepeat)
>  		__set_bit(EV_REP, input->evbit);
>  
> -	for (i = 0; i < plat->keymap_data->keymap_size; i++) {
> -		unsigned int key = plat->keymap_data->keymap[i];
> -
> -		keypad->cols |= 1 << KEY_COL(key);
> -		keypad->rows |= 1 << KEY_ROW(key);
> -	}
> +	stmpe_keypad_fill_used_pins(pdev, keypad, plat);
>  
>  	keypad->stmpe = stmpe;
>  	keypad->plat = plat;
> diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
> index ba157d4..b03cc64 100644
> --- a/drivers/mfd/stmpe.c
> +++ b/drivers/mfd/stmpe.c
> @@ -321,6 +321,7 @@ static struct resource stmpe_keypad_resources[] = {
>  
>  static struct mfd_cell stmpe_keypad_cell = {
>  	.name		= "stmpe-keypad",
> +	.of_compatible  = "st,stmpe-keypad",
>  	.resources	= stmpe_keypad_resources,
>  	.num_resources	= ARRAY_SIZE(stmpe_keypad_resources),
>  };
> -- 
> 1.7.9.5
> 

-- 
Dmitry

  reply	other threads:[~2012-10-10 16:50 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-05 15:31 [PATCH 00/10] Platform data clean-up and UIB device enablement Lee Jones
2012-10-05 15:31 ` [PATCH 01/10] mfd: Prevent STMPE from abusing mfd_add_devices' irq_base parameter Lee Jones
2012-10-05 15:31 ` [PATCH 02/10] mfd: Provide the STMPE driver with its own IRQ domain Lee Jones
2012-10-05 15:31 ` [PATCH 03/10] mfd: Correct copy and paste mistake in stmpe Lee Jones
2012-10-05 15:31 ` [PATCH 04/10] of/i2c: Add support for I2C_CLIENT_WAKE when booting with Device Tree Lee Jones
2012-10-05 18:13   ` Rob Herring
2012-10-08  7:32     ` Lee Jones
2012-10-05 18:56   ` Jean-Christophe PLAGNIOL-VILLARD
2012-10-05 15:31 ` [PATCH 05/10] mfd: Enable the STMPE MFD for " Lee Jones
2012-10-05 15:31 ` [PATCH 06/10] Documentation: Describe bindings for STMPE Multi-Functional Device driver Lee Jones
2012-10-05 15:31 ` [PATCH 07/10] input: Enable STMPE keypad driver for Device Tree Lee Jones
2012-10-10 16:50   ` Dmitry Torokhov [this message]
2012-10-11  8:10     ` Lee Jones
2012-10-05 15:31 ` [PATCH 08/10] Documentation: Describe bindings for STMPE Keypad driver Lee Jones
2012-10-05 15:31 ` [PATCH 09/10] ARM: ux500: Apply a Device Tree node for the STMPE MFD Lee Jones
2012-10-05 15:31 ` [PATCH 10/10] ARM: ux500: Supply the STMPE keypad Device Tree node to the STUIB DT Lee Jones
2012-10-05 19:53 ` [PATCH 00/10] Platform data clean-up and UIB device enablement Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20121010165004.GE19335@core.coreip.homeip.net \
    --to=dmitry.torokhov@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).