From mboxrd@z Thu Jan 1 00:00:00 1970 From: khali@linux-fr.org (Jean Delvare) Date: Fri, 12 Oct 2012 11:57:07 +0200 Subject: [PATCH v2] i2c: change the id to let the i2c-gpio work In-Reply-To: <1350034971-1050-1-git-send-email-voice.shen@atmel.com> References: <1350034971-1050-1-git-send-email-voice.shen@atmel.com> Message-ID: <20121012115707.76cc7511@endymion.delvare> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, 12 Oct 2012 17:42:51 +0800, Bo Shen wrote: > The i2c-gpio driver will turn the platform device ID to busnum. > When using platfrom device ID as -1, it means dynamically assigned > the busnum. When writing code, we need to make sure the busnum, > and call i2c_register_board_info(int busnum, ...) to register device > if using -1, we do not know the value of busnum. > > In order to solve this issue, set the platform device ID as a fix number > Here using 0 to match the busnum used in i2c_regsiter_board_info(). > > Signed-off-by: Bo Shen > --- > Change since v1 > Make the commit message more clear > --- > arch/arm/mach-at91/at91sam9260_devices.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c > index 0f24cfb..805ef95 100644 > --- a/arch/arm/mach-at91/at91sam9260_devices.c > +++ b/arch/arm/mach-at91/at91sam9260_devices.c > @@ -389,7 +389,7 @@ static struct i2c_gpio_platform_data pdata = { > > static struct platform_device at91sam9260_twi_device = { > .name = "i2c-gpio", > - .id = -1, > + .id = 0, > .dev.platform_data = &pdata, > }; > Acked-by: Jean Delvare -- Jean Delvare