[PATCH 4/6] ARM: bcm476x: Add stub clock driver

[mturquette@ti.com (Mike Turquette)]

Quoting Domenico Andreoli (2012-10-06 18:53:04)
> Index: b/drivers/clk/clk-bcm476x.c
> ===================================================================
> --- /dev/null
> +++ b/drivers/clk/clk-bcm476x.c
> @@ -0,0 +1,52 @@
> +/*
> + * Broadcom BCM476x SoCs clocks
> + *
> + * Copyright (C) 2011-2012 Domenico Andreoli <domenico.andreoli@linux.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-private.h>

Why clk-private.h?  That is deprecated and should not be used unless
absolutely necessary.  It will be removed once Tegra and OMAP stop using
it.

> +#include <linux/clk-provider.h>
> +#include <linux/clkdev.h>
> +#include <linux/clk/bcm476x.h>
> +
> +/*
> + * These are fixed clocks (and device tree doesn't support clk!).
> + *
> + * They're probably not all root clocks and it may be possible to
> + * turn them on and off but until this is mapped out better it's
> + * the only way they can be used.
> + */
> +DEFINE_CLK_FIXED_RATE(sys_pclk,   CLK_IS_ROOT, 312000000, 0);
> +DEFINE_CLK_FIXED_RATE(apb_pclk,   CLK_IS_ROOT, 156000000, 0);
> +DEFINE_CLK_FIXED_RATE(uart0_pclk, CLK_IS_ROOT, 78000000, 0);
> +DEFINE_CLK_FIXED_RATE(uart1_pclk, CLK_IS_ROOT, 78000000, 0);
> +DEFINE_CLK_FIXED_RATE(uart2_pclk, CLK_IS_ROOT, 78000000, 0);
> +

Can you use clk_register_fixed_rate instead?

Regards,
Mike