From mboxrd@z Thu Jan 1 00:00:00 1970 From: mturquette@ti.com (Mike Turquette) Date: Tue, 16 Oct 2012 10:06:20 -0700 Subject: [RFC][PATCH v4? 0/7] Adaptive Body-Bias for OMAP In-Reply-To: <20121016163225.GQ15569@atomide.com> References: <1349313974-5473-1-git-send-email-mturquette@ti.com> <20121011133304.GA19170@kahuna> <20121011222107.2941.62545@nucleus> <20121016163225.GQ15569@atomide.com> Message-ID: <20121016170620.21731.52746@nucleus> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Quoting Tony Lindgren (2012-10-16 09:32:25) > * Mike Turquette [121011 15:27]: > > Quoting Nishanth Menon (2012-10-11 06:33:04) > > > On 18:26-20121003, Mike Turquette wrote: > > > > From: Mike Turquette > > > [...] > > > > > > > > arch/arm/mach-omap2/Makefile | 8 +- > > > > arch/arm/mach-omap2/abb.c | 322 +++++++++++++++++++++++++ > > > > arch/arm/mach-omap2/abb.h | 94 ++++++++ > > > [...] > > > > arch/arm/plat-omap/include/plat/voltage.h | 1 + > > > > 18 files changed, 699 insertions(+), 37 deletions(-) > > > > create mode 100644 arch/arm/mach-omap2/abb.c > > > > create mode 100644 arch/arm/mach-omap2/abb.h > > > > create mode 100644 arch/arm/mach-omap2/abb36xx_data.c > > > > create mode 100644 arch/arm/mach-omap2/abb44xx_data.c > > > > > > dumb question: with the request to move everything out of mach-omap2 > > > directory, do we still want to add more files into mach-omap2? > > > > > > > Not a dumb question at all. I approached this problem by modeling it > > after existing voltage layer code (in particular the vp and vc drivers). > > > > My hope is to get it merged as-is and then bundle the abb code up with > > the vp/vc migration to drivers/* when that happens some day. People > > using omap36xx and above need this code now, so it seems prudent to take > > this approach today. > > This is needed, but makes moving the vc code to drivers a bit > more complex. > > So we also need a plan to move this all to drivers in the follow > up patches. And we need a maintainer for the code. Who is going to > be doing all that? > Is there already somebody committed to moving vp/vc code out to drivers? If so then I can take responsibility for moving the abb code and coordinate with that person. If nobody has put the vp/vc migration onto their todo list then that is a bigger question. Regards, Mike > Regards, > > Tony