From: richardcochran@gmail.com (Richard Cochran)
To: linux-arm-kernel@lists.infradead.org
Subject: Fwd: [PATCH 5/5] arm/dts: am33xx: Add cpsw and mdio module nodes for AM33XX
Date: Wed, 17 Oct 2012 20:18:14 +0200 [thread overview]
Message-ID: <20121017181813.GB2412@netboy.at.omicron.at> (raw)
Benoit,
Would you please take this bugfix for 3.7-rc2? The suggestion to
mail you came from Toni Lindgren. The context where it came from
is here:
http://lists.arm.linux.org.uk/lurker/message/20121015.191630.bdae3c50.en.html
Thanks,
Richard
----- Forwarded message from Richard Cochran <richardcochran@gmail.com> -----
Date: Mon, 15 Oct 2012 21:16:35 +0200
From: Richard Cochran <richardcochran@gmail.com>
To: netdev at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org, Arnd Bergmann <arnd@arndb.de>,
David Miller <davem@davemloft.net>,
Russell King <linux@arm.linux.org.uk>,
Mugunthan V N <mugunthanvnm@ti.com>,
Vaibhav Hiremath <hvaibhav@ti.com>
Subject: [PATCH 5/5] arm/dts: am33xx: Add cpsw and mdio module nodes for AM33XX
X-Mailer: git-send-email 1.7.2.5
From: Mugunthan V N <mugunthanvnm@ti.com>
Add CPSW and MDIO related device tree data for AM33XX.
Also enable them into board/evm dts files by providing
respective phy-id.
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
---
arch/arm/boot/dts/am335x-bone.dts | 8 ++++++
arch/arm/boot/dts/am335x-evm.dts | 8 ++++++
arch/arm/boot/dts/am33xx.dtsi | 50 +++++++++++++++++++++++++++++++++++++
3 files changed, 66 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index c634f87..e233cfa 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -78,3 +78,11 @@
};
};
};
+
+&cpsw_emac0 {
+ phy_id = "4a101000.mdio:00";
+};
+
+&cpsw_emac1 {
+ phy_id = "4a101000.mdio:01";
+};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 185d632..415c3b3 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -118,3 +118,11 @@
};
};
};
+
+&cpsw_emac0 {
+ phy_id = "4a101000.mdio:00";
+};
+
+&cpsw_emac1 {
+ phy_id = "4a101000.mdio:01";
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index bb31bff..f6bea04 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -210,5 +210,55 @@
interrupt-parent = <&intc>;
interrupts = <91>;
};
+
+ mac: ethernet at 4A100000 {
+ compatible = "ti,cpsw";
+ ti,hwmods = "cpgmac0";
+ cpdma_channels = <8>;
+ host_port_no = <0>;
+ cpdma_reg_ofs = <0x800>;
+ cpdma_sram_ofs = <0xa00>;
+ ale_reg_ofs = <0xd00>;
+ ale_entries = <1024>;
+ host_port_reg_ofs = <0x108>;
+ hw_stats_reg_ofs = <0x900>;
+ bd_ram_ofs = <0x2000>;
+ bd_ram_size = <0x2000>;
+ no_bd_ram = <0>;
+ rx_descs = <64>;
+ mac_control = <0x20>;
+ slaves = <2>;
+ reg = <0x4a100000 0x800
+ 0x4a101200 0x100
+ 0x4a101000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+ /* c0_rx_thresh_pend c0_rx_pend c0_tx_pend c0_misc_pend*/
+ interrupts = <40 41 42 43>;
+ ranges;
+ cpsw_emac0: slave at 0 {
+ slave_reg_ofs = <0x208>;
+ sliver_reg_ofs = <0xd80>;
+ /* Filled in by U-Boot */
+ mac-address = [ 00 00 00 00 00 00 ];
+ };
+ cpsw_emac1: slave at 1 {
+ slave_reg_ofs = <0x308>;
+ sliver_reg_ofs = <0xdc0>;
+ /* Filled in by U-Boot */
+ mac-address = [ 00 00 00 00 00 00 ];
+ };
+
+ davinci_mdio: mdio at 4a101000 {
+ compatible = "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "davinci_mdio";
+ bus_freq = <1000000>;
+ reg = <0x4a101000 0x100>;
+ };
+
+ };
};
};
--
1.7.2.5
----- End forwarded message -----
reply other threads:[~2012-10-17 18:18 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121017181813.GB2412@netboy.at.omicron.at \
--to=richardcochran@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox