From mboxrd@z Thu Jan 1 00:00:00 1970 From: richardcochran@gmail.com (Richard Cochran) Date: Sat, 20 Oct 2012 20:01:24 +0200 Subject: OMAP baseline test results for v3.7-rc1 In-Reply-To: References: <20121020141136.GA6433@netboy.at.omicron.at> Message-ID: <20121020180123.GA2630@netboy.at.omicron.at> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sat, Oct 20, 2012 at 04:27:19PM +0000, Paul Walmsley wrote: > > BeagleBone Rev. A6 does not boot v3.7-rc1, at least not for me. > > I recently posted the missing patches needed to make it work (but the > > patches are not by me). > > Those are the patches at: > > http://lists.arm.linux.org.uk/lurker/message/20121015.191630.bdae3c50.en.html > > ? Yes, that is right. Only the first patch is absoutely required for booting. > Thanks for the report. Are you using the stock v3.7-rc1 DTS file in > arch/arm/boot/dts/am335x-bone.dts ? Yes. > Also are you using omap2plus_defconfig? Yes, but I de-selected a few items. I will try it again without changing anything. > Here's the console log from the boot test here: > > http://www.pwsan.com/omap/testlogs/test_v3.7-rc1/20121017205513/boot/am335xbone/am335xbone_log.txt > > And here's the kernel config and uImage+DTB from the boot test here: > > http://www.pwsan.com/omap/testlogs/test_v3.7-rc1/20121017205513/build/am33xx_only/ Okay, so there are a number of differences between your am33xx_only and the omap2plus_defconfig. I will try it with your config as well. > In terms of differences from your setup, looks like we have different > X-Loader and u-boot; it wouldn't surprise me if we have different kernel > configs too. What is X-Loader? Thanks, Richard