* [PATCH] arm: dts: omap4-sdp: pinmux configuration for keypad
@ 2012-10-22 7:29 Sourav Poddar
2012-10-22 7:45 ` Benoit Cousson
2012-10-22 16:19 ` Tony Lindgren
0 siblings, 2 replies; 6+ messages in thread
From: Sourav Poddar @ 2012-10-22 7:29 UTC (permalink / raw)
To: linux-arm-kernel
Currently, omap4 keypad mux settings are done in the board file.
Populate the mux settings in the dts file for the keypad to
work via dt.
Cc: Felipe Balbi <balbi@ti.com>
Tested on omap4430 sdp with 3.7-rc1.
Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
---
arch/arm/boot/dts/omap4-sdp.dts | 26 ++++++++++++++++++++++++++
1 files changed, 26 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 5b7e04f..5efb059 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -194,6 +194,27 @@
0xbc 0x100 /* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */
>;
};
+
+ keypad_pins: pinmux_keypad_pins {
+ pinctrl-single,pins = <
+ 0x24 0x4119 /* gpmc_a18.kpd_row6 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+ 0x26 0x4119 /* gpmc_a19.kpd_row6 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+ 0x2c 0x4001 /* gpmc_a22.kpd_col6 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+ 0x2e 0x4001 /* gpmc_a23.kpd_col7 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+ 0x13c 0x4001 /* kpd_col0.kpd_col0 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+ 0x13e 0x4001 /* kpd_col1.kpd_col1 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+ 0x140 0x4001 /* kpd_col2.kpd_col2 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+ 0x142 0x10F /* kpd_col3.kpd_col3 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+ 0x144 0x4001 /* kpd_col4.kpd_col4 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+ 0x146 0x4001 /* kpd_col5.kpd_col5 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+ 0x148 0xc119 /* kpd_row0.kpd_row0 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+ 0x14a 0x4119 /* kpd_row1.kpd_row1 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+ 0x14c 0x4119 /* kpd_row2.kpd_row2 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+ 0x14e 0x4119 /* kpd_row3.kpd_row3 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+ 0x150 0x4119 /* kpd_row4.kpd_row4 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+ 0x152 0x4119 /* kpd_row5.kpd_row5 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+ >;
+ };
};
&i2c1 {
@@ -406,3 +427,8 @@
&mcbsp3 {
status = "disabled";
};
+
+&keypad {
+ pinctrl-names = "default";
+ pinctrl-0 = <&keypad_pins>;
+};
--
1.7.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH] arm: dts: omap4-sdp: pinmux configuration for keypad
2012-10-22 7:29 [PATCH] arm: dts: omap4-sdp: pinmux configuration for keypad Sourav Poddar
@ 2012-10-22 7:45 ` Benoit Cousson
2012-10-22 8:23 ` Sourav
2012-10-22 16:19 ` Tony Lindgren
1 sibling, 1 reply; 6+ messages in thread
From: Benoit Cousson @ 2012-10-22 7:45 UTC (permalink / raw)
To: linux-arm-kernel
Hi Sourav,
On 10/22/2012 09:29 AM, Sourav Poddar wrote:
> Currently, omap4 keypad mux settings are done in the board file.
> Populate the mux settings in the dts file for the keypad to
> work via dt.
Have you changed the driver to handle properly the dependency with the
pinctrl and thus return EPROBE_DEFER if this is not ready?
Seb Guiriec has just sent a patch to do that for the omap-i2c driver
([PATCH] i2c: omap: adopt pinctrl support).
> Cc: Felipe Balbi <balbi@ti.com>
> Tested on omap4430 sdp with 3.7-rc1.
>
> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
> ---
> arch/arm/boot/dts/omap4-sdp.dts | 26 ++++++++++++++++++++++++++
> 1 files changed, 26 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
> index 5b7e04f..5efb059 100644
> --- a/arch/arm/boot/dts/omap4-sdp.dts
> +++ b/arch/arm/boot/dts/omap4-sdp.dts
> @@ -194,6 +194,27 @@
> 0xbc 0x100 /* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */
> >;
> };
> +
> + keypad_pins: pinmux_keypad_pins {
> + pinctrl-single,pins = <
> + 0x24 0x4119 /* gpmc_a18.kpd_row6 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
> + 0x26 0x4119 /* gpmc_a19.kpd_row6 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
> + 0x2c 0x4001 /* gpmc_a22.kpd_col6 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
> + 0x2e 0x4001 /* gpmc_a23.kpd_col7 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
> + 0x13c 0x4001 /* kpd_col0.kpd_col0 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
> + 0x13e 0x4001 /* kpd_col1.kpd_col1 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
> + 0x140 0x4001 /* kpd_col2.kpd_col2 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
> + 0x142 0x10F /* kpd_col3.kpd_col3 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
Alway use lower case for hexa value.
> + 0x144 0x4001 /* kpd_col4.kpd_col4 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
> + 0x146 0x4001 /* kpd_col5.kpd_col5 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
> + 0x148 0xc119 /* kpd_row0.kpd_row0 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
> + 0x14a 0x4119 /* kpd_row1.kpd_row1 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
> + 0x14c 0x4119 /* kpd_row2.kpd_row2 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
> + 0x14e 0x4119 /* kpd_row3.kpd_row3 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
> + 0x150 0x4119 /* kpd_row4.kpd_row4 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
> + 0x152 0x4119 /* kpd_row5.kpd_row5 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
> + >;
> + };
> };
>
> &i2c1 {
> @@ -406,3 +427,8 @@
> &mcbsp3 {
> status = "disabled";
> };
> +
> +&keypad {
> + pinctrl-names = "default";
> + pinctrl-0 = <&keypad_pins>;
> +};
Otherwise that looks good.
Thanks,
Benoit
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH] arm: dts: omap4-sdp: pinmux configuration for keypad
2012-10-22 7:45 ` Benoit Cousson
@ 2012-10-22 8:23 ` Sourav
2012-10-22 8:26 ` Benoit Cousson
0 siblings, 1 reply; 6+ messages in thread
From: Sourav @ 2012-10-22 8:23 UTC (permalink / raw)
To: linux-arm-kernel
Hi Benoit,
On Monday 22 October 2012 01:15 PM, Benoit Cousson wrote:
> Hi Sourav,
>
> On 10/22/2012 09:29 AM, Sourav Poddar wrote:
>> Currently, omap4 keypad mux settings are done in the board file.
>> Populate the mux settings in the dts file for the keypad to
>> work via dt.
> Have you changed the driver to handle properly the dependency with the
> pinctrl and thus return EPROBE_DEFER if this is not ready?
I have send a patch[1] to the mailing list on the driver changes.
http://www.spinics.net/lists/linux-omap/msg79985.html.
Though, I see I have missed the following EPROBE_DEFER check..
+ if (PTR_ERR(dev->pins) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
Will add for the above patch.
> Seb Guiriec has just sent a patch to do that for the omap-i2c driver
> ([PATCH] i2c: omap: adopt pinctrl support).
>
>> Cc: Felipe Balbi <balbi@ti.com>
>> Tested on omap4430 sdp with 3.7-rc1.
>>
>> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
>> ---
>> arch/arm/boot/dts/omap4-sdp.dts | 26 ++++++++++++++++++++++++++
>> 1 files changed, 26 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
>> index 5b7e04f..5efb059 100644
>> --- a/arch/arm/boot/dts/omap4-sdp.dts
>> +++ b/arch/arm/boot/dts/omap4-sdp.dts
>> @@ -194,6 +194,27 @@
>> 0xbc 0x100 /* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */
>> >;
>> };
>> +
>> + keypad_pins: pinmux_keypad_pins {
>> + pinctrl-single,pins = <
>> + 0x24 0x4119 /* gpmc_a18.kpd_row6 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
>> + 0x26 0x4119 /* gpmc_a19.kpd_row6 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
>> + 0x2c 0x4001 /* gpmc_a22.kpd_col6 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
>> + 0x2e 0x4001 /* gpmc_a23.kpd_col7 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
>> + 0x13c 0x4001 /* kpd_col0.kpd_col0 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
>> + 0x13e 0x4001 /* kpd_col1.kpd_col1 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
>> + 0x140 0x4001 /* kpd_col2.kpd_col2 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
>> + 0x142 0x10F /* kpd_col3.kpd_col3 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
> Alway use lower case for hexa value.
Ok. Will fix and send a new version.
>> + 0x144 0x4001 /* kpd_col4.kpd_col4 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
>> + 0x146 0x4001 /* kpd_col5.kpd_col5 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
>> + 0x148 0xc119 /* kpd_row0.kpd_row0 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
>> + 0x14a 0x4119 /* kpd_row1.kpd_row1 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
>> + 0x14c 0x4119 /* kpd_row2.kpd_row2 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
>> + 0x14e 0x4119 /* kpd_row3.kpd_row3 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
>> + 0x150 0x4119 /* kpd_row4.kpd_row4 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
>> + 0x152 0x4119 /* kpd_row5.kpd_row5 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
>> + >;
>> + };
>> };
>>
>> &i2c1 {
>> @@ -406,3 +427,8 @@
>> &mcbsp3 {
>> status = "disabled";
>> };
>> +
>> +&keypad {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&keypad_pins>;
>> +};
> Otherwise that looks good.
>
> Thanks,
> Benoit
Thanks,
Sourav
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH] arm: dts: omap4-sdp: pinmux configuration for keypad
2012-10-22 8:23 ` Sourav
@ 2012-10-22 8:26 ` Benoit Cousson
0 siblings, 0 replies; 6+ messages in thread
From: Benoit Cousson @ 2012-10-22 8:26 UTC (permalink / raw)
To: linux-arm-kernel
On 10/22/2012 10:23 AM, Sourav wrote:
> Hi Benoit,
> On Monday 22 October 2012 01:15 PM, Benoit Cousson wrote:
>> Hi Sourav,
>>
>> On 10/22/2012 09:29 AM, Sourav Poddar wrote:
>>> Currently, omap4 keypad mux settings are done in the board file.
>>> Populate the mux settings in the dts file for the keypad to
>>> work via dt.
>> Have you changed the driver to handle properly the dependency with the
>> pinctrl and thus return EPROBE_DEFER if this is not ready?
> I have send a patch[1] to the mailing list on the driver changes.
> http://www.spinics.net/lists/linux-omap/msg79985.html.
Yeah, sorry, I've just seen it :-(.
> Though, I see I have missed the following EPROBE_DEFER check..
Yes, indeed.
> + if (PTR_ERR(dev->pins) == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> Will add for the above patch.
Thanks,
Benoit
>> Seb Guiriec has just sent a patch to do that for the omap-i2c driver
>> ([PATCH] i2c: omap: adopt pinctrl support).
>>
>>> Cc: Felipe Balbi <balbi@ti.com>
>>> Tested on omap4430 sdp with 3.7-rc1.
>>>
>>> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
>>> ---
>>> arch/arm/boot/dts/omap4-sdp.dts | 26 ++++++++++++++++++++++++++
>>> 1 files changed, 26 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/omap4-sdp.dts
>>> b/arch/arm/boot/dts/omap4-sdp.dts
>>> index 5b7e04f..5efb059 100644
>>> --- a/arch/arm/boot/dts/omap4-sdp.dts
>>> +++ b/arch/arm/boot/dts/omap4-sdp.dts
>>> @@ -194,6 +194,27 @@
>>> 0xbc 0x100 /* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT |
>>> MODE0 */
>>> >;
>>> };
>>> +
>>> + keypad_pins: pinmux_keypad_pins {
>>> + pinctrl-single,pins = <
>>> + 0x24 0x4119 /* gpmc_a18.kpd_row6 OMAP_PULL_ENA |
>>> OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
>>> + 0x26 0x4119 /* gpmc_a19.kpd_row6 OMAP_PULL_ENA |
>>> OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
>>> + 0x2c 0x4001 /* gpmc_a22.kpd_col6 OMAP_WAKEUP_EN |
>>> OMAP_MUX_MODE1 */
>>> + 0x2e 0x4001 /* gpmc_a23.kpd_col7 OMAP_WAKEUP_EN |
>>> OMAP_MUX_MODE1 */
>>> + 0x13c 0x4001 /* kpd_col0.kpd_col0 OMAP_WAKEUP_EN |
>>> OMAP_MUX_MODE1 */
>>> + 0x13e 0x4001 /* kpd_col1.kpd_col1 OMAP_WAKEUP_EN |
>>> OMAP_MUX_MODE1 */
>>> + 0x140 0x4001 /* kpd_col2.kpd_col2 OMAP_WAKEUP_EN |
>>> OMAP_MUX_MODE1 */
>>> + 0x142 0x10F /* kpd_col3.kpd_col3 OMAP_WAKEUP_EN |
>>> OMAP_MUX_MODE1 */
>> Alway use lower case for hexa value.
> Ok. Will fix and send a new version.
>>> + 0x144 0x4001 /* kpd_col4.kpd_col4 OMAP_WAKEUP_EN |
>>> OMAP_MUX_MODE1 */
>>> + 0x146 0x4001 /* kpd_col5.kpd_col5 OMAP_WAKEUP_EN |
>>> OMAP_MUX_MODE1 */
>>> + 0x148 0xc119 /* kpd_row0.kpd_row0 OMAP_PULL_ENA |
>>> OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
>>> + 0x14a 0x4119 /* kpd_row1.kpd_row1 OMAP_PULL_ENA |
>>> OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
>>> + 0x14c 0x4119 /* kpd_row2.kpd_row2 OMAP_PULL_ENA |
>>> OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
>>> + 0x14e 0x4119 /* kpd_row3.kpd_row3 OMAP_PULL_ENA |
>>> OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
>>> + 0x150 0x4119 /* kpd_row4.kpd_row4 OMAP_PULL_ENA |
>>> OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
>>> + 0x152 0x4119 /* kpd_row5.kpd_row5 OMAP_PULL_ENA |
>>> OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
>>> + >;
>>> + };
>>> };
>>> &i2c1 {
>>> @@ -406,3 +427,8 @@
>>> &mcbsp3 {
>>> status = "disabled";
>>> };
>>> +
>>> +&keypad {
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&keypad_pins>;
>>> +};
>> Otherwise that looks good.
>>
>> Thanks,
>> Benoit
> Thanks,
> Sourav
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] arm: dts: omap4-sdp: pinmux configuration for keypad
2012-10-22 7:29 [PATCH] arm: dts: omap4-sdp: pinmux configuration for keypad Sourav Poddar
2012-10-22 7:45 ` Benoit Cousson
@ 2012-10-22 16:19 ` Tony Lindgren
2012-10-23 6:24 ` Sourav
1 sibling, 1 reply; 6+ messages in thread
From: Tony Lindgren @ 2012-10-22 16:19 UTC (permalink / raw)
To: linux-arm-kernel
* Sourav Poddar <sourav.poddar@ti.com> [121022 00:30]:
> --- a/arch/arm/boot/dts/omap4-sdp.dts
> +++ b/arch/arm/boot/dts/omap4-sdp.dts
> @@ -194,6 +194,27 @@
> 0xbc 0x100 /* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */
> >;
> };
> +
> + keypad_pins: pinmux_keypad_pins {
> + pinctrl-single,pins = <
> + 0x24 0x4119 /* gpmc_a18.kpd_row6 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
> + 0x26 0x4119 /* gpmc_a19.kpd_row6 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
> + 0x2c 0x4001 /* gpmc_a22.kpd_col6 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
> + 0x2e 0x4001 /* gpmc_a23.kpd_col7 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
> + 0x13c 0x4001 /* kpd_col0.kpd_col0 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
> + 0x13e 0x4001 /* kpd_col1.kpd_col1 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
> + 0x140 0x4001 /* kpd_col2.kpd_col2 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
> + 0x142 0x10F /* kpd_col3.kpd_col3 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
> + 0x144 0x4001 /* kpd_col4.kpd_col4 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
> + 0x146 0x4001 /* kpd_col5.kpd_col5 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
> + 0x148 0xc119 /* kpd_row0.kpd_row0 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
> + 0x14a 0x4119 /* kpd_row1.kpd_row1 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
> + 0x14c 0x4119 /* kpd_row2.kpd_row2 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
> + 0x14e 0x4119 /* kpd_row3.kpd_row3 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
> + 0x150 0x4119 /* kpd_row4.kpd_row4 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
> + 0x152 0x4119 /* kpd_row5.kpd_row5 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
> + >;
> + };
> };
Please shorten these to leave out OMAP_:
pinctrl-single,pins = <
0x24 0x4119 /* gpmc_a18.kpd_row6 PULL_ENA | PULL_UP | WAKEUP_EN | MUX_MODE1 | INPUT_EN */
0x26 0x4119 /* gpmc_a19.kpd_row6 PULL_ENA | PULL_UP | WAKEUP_EN | MUX_MODE1 | INPUT_EN */
...
When we convert them over to use the preprocessor, we can still
easily replace them.
Regards,
Tony
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH] arm: dts: omap4-sdp: pinmux configuration for keypad
2012-10-22 16:19 ` Tony Lindgren
@ 2012-10-23 6:24 ` Sourav
0 siblings, 0 replies; 6+ messages in thread
From: Sourav @ 2012-10-23 6:24 UTC (permalink / raw)
To: linux-arm-kernel
Hi Tony,
On Monday 22 October 2012 09:49 PM, Tony Lindgren wrote:
> * Sourav Poddar <sourav.poddar@ti.com> [121022 00:30]:
>> --- a/arch/arm/boot/dts/omap4-sdp.dts
>> +++ b/arch/arm/boot/dts/omap4-sdp.dts
>> @@ -194,6 +194,27 @@
>> 0xbc 0x100 /* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */
>> >;
>> };
>> +
>> + keypad_pins: pinmux_keypad_pins {
>> + pinctrl-single,pins = <
>> + 0x24 0x4119 /* gpmc_a18.kpd_row6 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
>> + 0x26 0x4119 /* gpmc_a19.kpd_row6 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
>> + 0x2c 0x4001 /* gpmc_a22.kpd_col6 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
>> + 0x2e 0x4001 /* gpmc_a23.kpd_col7 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
>> + 0x13c 0x4001 /* kpd_col0.kpd_col0 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
>> + 0x13e 0x4001 /* kpd_col1.kpd_col1 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
>> + 0x140 0x4001 /* kpd_col2.kpd_col2 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
>> + 0x142 0x10F /* kpd_col3.kpd_col3 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
>> + 0x144 0x4001 /* kpd_col4.kpd_col4 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
>> + 0x146 0x4001 /* kpd_col5.kpd_col5 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
>> + 0x148 0xc119 /* kpd_row0.kpd_row0 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
>> + 0x14a 0x4119 /* kpd_row1.kpd_row1 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
>> + 0x14c 0x4119 /* kpd_row2.kpd_row2 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
>> + 0x14e 0x4119 /* kpd_row3.kpd_row3 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
>> + 0x150 0x4119 /* kpd_row4.kpd_row4 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
>> + 0x152 0x4119 /* kpd_row5.kpd_row5 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
>> + >;
>> + };
>> };
> Please shorten these to leave out OMAP_:
Ok. Will update and send a new version.
> pinctrl-single,pins = <
> 0x24 0x4119 /* gpmc_a18.kpd_row6 PULL_ENA | PULL_UP | WAKEUP_EN | MUX_MODE1 | INPUT_EN */
> 0x26 0x4119 /* gpmc_a19.kpd_row6 PULL_ENA | PULL_UP | WAKEUP_EN | MUX_MODE1 | INPUT_EN */
> ...
>
> When we convert them over to use the preprocessor, we can still
> easily replace them.
>
> Regards,
>
> Tony
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2012-10-23 6:24 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-10-22 7:29 [PATCH] arm: dts: omap4-sdp: pinmux configuration for keypad Sourav Poddar
2012-10-22 7:45 ` Benoit Cousson
2012-10-22 8:23 ` Sourav
2012-10-22 8:26 ` Benoit Cousson
2012-10-22 16:19 ` Tony Lindgren
2012-10-23 6:24 ` Sourav
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).