linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: andrew@lunn.ch (Andrew Lunn)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl
Date: Wed, 24 Oct 2012 22:01:28 +0200	[thread overview]
Message-ID: <20121024200128.GY21046@lunn.ch> (raw)
In-Reply-To: <201210242006.55879.michael@walle.cc>

On Wed, Oct 24, 2012 at 08:06:55PM +0200, Michael Walle wrote:
> Hi Andrew,
> 
> Am Mittwoch 24 Oktober 2012, 16:53:45 schrieb Andrew Lunn:
> > This patchset converts all DT kirkwood boards to using pinctrl.
> > 
> > This patchset depends on an earlier patchset to allow the mvebu
> > pinctrl driver and gpio driver to be built for kirkwood.
> > 
> > Only the TS219 conversion has been tested on hardware. The remaining
> > are compile tested. Before merging upstream, it would be good if the
> > others could be tested on hardware.
> > 
> > This series along with the dependents can be found in:
> 
> Unfortunately, this doesn't work for me. git bisect tells me its commit 
> e01139ec82162f21875d09e820686aede4219695.
> 
> I guess it has something to do with the lsxl_init calling gpio_set_value().

Humm.

I guess it is too early to use gpio. I don't think the gpio driver has
not been configured yet.

I need to think about this.

What happens if you comment out these two gpio_set_value calls?

     Andrew

  reply	other threads:[~2012-10-24 20:01 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-24 14:53 [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl Andrew Lunn
2012-10-24 14:53 ` [PATCH 1/9] ARM: Kirkwood: Convert TS219 " Andrew Lunn
2012-10-24 19:31   ` Thomas Petazzoni
2012-10-24 19:49     ` Sebastian Hesselbarth
2012-10-24 20:00       ` Thomas Petazzoni
2012-10-24 20:04         ` Andrew Lunn
2012-10-24 20:05           ` Thomas Petazzoni
2012-10-24 20:14         ` Sebastian Hesselbarth
2012-10-24 20:19           ` Thomas Petazzoni
2012-10-24 14:53 ` [PATCH 2/9] ARM: Kirkwood: Convert iConnect " Andrew Lunn
2012-10-24 14:53 ` [PATCH 3/9] ARM: Kirkwood: Convert dnskw " Andrew Lunn
2012-10-25 22:58   ` Jamie Lentin
2012-10-26  6:01     ` Andrew Lunn
2012-10-26  9:42       ` Jamie Lentin
2012-10-26 10:24         ` Andrew Lunn
2012-10-26 12:30           ` Jamie Lentin
2012-10-24 14:53 ` [PATCH 4/9] ARM: Kirkwood: Convert dockstar " Andrew Lunn
2012-10-24 14:53 ` [PATCH 5/9] ARM: Kirkwood: Convert dreamplug " Andrew Lunn
2012-10-24 14:53 ` [PATCH 6/9] ARM: Kirkwood: Convert GoFlex Net " Andrew Lunn
2012-10-26 17:28   ` Josh Coombs
2012-10-27  8:51     ` Andrew Lunn
2012-10-28 14:31   ` Josh Coombs
2012-10-24 14:53 ` [PATCH 7/9] ARM: Kirkwood: Convert ib62x0 " Andrew Lunn
2012-10-24 20:40   ` Simon Baatz
2012-10-24 14:53 ` [PATCH 8/9] ARM: Kirkwood: Convert lsxl boards " Andrew Lunn
2012-10-24 20:37   ` Michael Walle
2012-10-28 16:40   ` Michael Walle
2012-10-24 14:53 ` [PATCH 9/9] ARM: Kirkwood: Convert IX2-200 " Andrew Lunn
2012-10-24 20:04   ` Thomas Petazzoni
2012-10-24 20:20     ` Andrew Lunn
2012-10-24 20:29       ` Thomas Petazzoni
2012-10-24 15:29 ` [PATCH 0/9] ARM: Kirkwood: Convert " Josh Coombs
2012-10-24 15:35   ` Andrew Lunn
2012-10-24 19:26     ` Thomas Petazzoni
2012-10-24 18:06 ` Michael Walle
2012-10-24 20:01   ` Andrew Lunn [this message]
2012-10-24 20:47     ` Michael Walle
2012-10-24 21:33     ` Thomas Petazzoni
2012-10-25  5:46       ` Andrew Lunn
2012-10-25  6:28         ` Thomas Petazzoni
2012-10-25  7:39           ` Michael Walle
2012-10-25  7:43             ` Thomas Petazzoni
2012-10-25 20:19               ` Michael Walle
2012-10-26 18:06               ` Michael Walle
2012-10-26 18:45                 ` Thomas Petazzoni
2012-10-26 20:17                   ` Michael Walle
2012-10-27  8:59                     ` Andrew Lunn
2012-10-25 22:57           ` Jamie Lentin
2012-10-28 16:57 ` Andrew Lunn
2012-10-28 18:17   ` Michael Walle
2012-10-28 19:50   ` Simon Baatz
2012-10-28 20:01     ` Andrew Lunn
2012-10-28 21:06   ` Jamie Lentin
2012-10-31 22:38   ` Josh Coombs
2012-11-07 16:13   ` [RFC PATCH 0/2] Kirkwood 98dx4122 pinctrl variant Valentin Longchamp
2012-11-07 17:36     ` Andrew Lunn
2012-11-07 16:13   ` [PATCH 1/2] ARM: support 98DX412x kirkwoods with pinctrl Valentin Longchamp
2012-11-07 16:13   ` [PATCH 2/2] ARM: convert the km_kirkwood board to pinctrl Valentin Longchamp

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20121024200128.GY21046@lunn.ch \
    --to=andrew@lunn.ch \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).