From: michael@walle.cc (Michael Walle)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl
Date: Wed, 24 Oct 2012 20:06:55 +0200 [thread overview]
Message-ID: <201210242006.55879.michael@walle.cc> (raw)
In-Reply-To: <1351090434-30499-1-git-send-email-andrew@lunn.ch>
Hi Andrew,
Am Mittwoch 24 Oktober 2012, 16:53:45 schrieb Andrew Lunn:
> This patchset converts all DT kirkwood boards to using pinctrl.
>
> This patchset depends on an earlier patchset to allow the mvebu
> pinctrl driver and gpio driver to be built for kirkwood.
>
> Only the TS219 conversion has been tested on hardware. The remaining
> are compile tested. Before merging upstream, it would be good if the
> others could be tested on hardware.
>
> This series along with the dependents can be found in:
Unfortunately, this doesn't work for me. git bisect tells me its commit
e01139ec82162f21875d09e820686aede4219695.
I guess it has something to do with the lsxl_init calling gpio_set_value().
Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0
Linux version 3.7.0-rc2-00015-g2773c33 (mw at thanatos) (gcc version 4.4.5
(Debian 4.4.5-8) ) #8 PREEMPT Wed Oct 24 20:05:32 CEST 2012
CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
CPU: VIVT data cache, VIVT instruction cache
Machine: Marvell Kirkwood (Flattened Device Tree), model: Buffalo Linkstation
LS-CHLv2
bootconsole [earlycon0] enabled
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: console=ttyS0,115200 root=/dev/sda2 earlyprintk
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 55828k/55828k available, 9708k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xc4800000 - 0xff000000 ( 936 MB)
lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc04e2660 (4970 kB)
.init : 0xc04e3000 - 0xc0506cc0 ( 144 kB)
.data : 0xc0508000 - 0xc0540280 ( 225 kB)
.bss : 0xc05402a4 - 0xc05d7a3c ( 606 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:114
sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 25769ms
Console: colour dummy device 80x30
Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x3baaa8 - 0x3baae4
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 1024 KiB pool for atomic coherent allocations
Kirkwood: MV88F6281-A1, TCLK=166666667.
Feroceon L2: Enabling L2
Feroceon L2: Cache support initialised.
Unable to handle kernel NULL pointer dereference at virtual address 0000003c
pgd = c0004000
[0000003c] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT ARM
Modules linked in:
CPU: 0 Not tainted (3.7.0-rc2-00015-g2773c33 #8)
PC is at __gpio_set_value+0x20/0xb4
LR is at lsxl_init+0x14/0x58
pc : [<c01ab75c>] lr : [<c04e99d0>] psr: 20000053
sp : c342ff20 ip : 00000000 fp : 00000000
r10: 00000089 r9 : c0506878 r8 : c04e4498
r7 : 00000000 r6 : c05cea18 r5 : 00000000 r4 : 0000000b
r3 : 00000084 r2 : 00000001 r1 : 00000001 r0 : 0000000b
Flags: nzCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel
Control: 0005397f Table: 00004000 DAC: 00000017
Process swapper (pid: 1, stack limit = 0xc342e1b8)
Stack: (0xc342ff20 to 0xc3430000)
ff20: 00000037 c3b5508c c0516230 00000004 c05402c0 c04e99d0 c05005f8 c04e9640
ff40: c05005f8 c04e44b4 c05005f8 c0008614 00000003 00000003 00000000 c05005f8
ff60: c05005f8 00000004 c05402c0 c0500610 c04e31b0 00000089 00000000 c03ab064
ff80: 00000003 00000003 c04e31b0 c03aaf74 00000000 c03aaf74 00000000 00000000
ffa0: 00000000 00000000 00000000 c0008dd0 00000000 00000000 00000000 00000000
ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[<c01ab75c>] (__gpio_set_value+0x20/0xb4) from [<c04e99d0>]
(lsxl_init+0x14/0x58)
[<c04e99d0>] (lsxl_init+0x14/0x58) from [<c04e9640>]
(kirkwood_dt_init+0xe4/0x158)
[<c04e9640>] (kirkwood_dt_init+0xe4/0x158) from [<c04e44b4>]
(customize_machine+0x1c/0x28)
[<c04e44b4>] (customize_machine+0x1c/0x28) from [<c0008614>]
(do_one_initcall+0x30/0x174)
[<c0008614>] (do_one_initcall+0x30/0x174) from [<c03ab064>]
(kernel_init+0xf0/0x2a0)
[<c03ab064>] (kernel_init+0xf0/0x2a0) from [<c0008dd0>]
(ret_from_fork+0x14/0x24)
Code: e24dd008 e1a04000 e7965003 e1a02001 (e5d5303c)
---[ end trace 1b75b31a2719ed1c ]---
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
--
Michael
next prev parent reply other threads:[~2012-10-24 18:06 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-24 14:53 [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl Andrew Lunn
2012-10-24 14:53 ` [PATCH 1/9] ARM: Kirkwood: Convert TS219 " Andrew Lunn
2012-10-24 19:31 ` Thomas Petazzoni
2012-10-24 19:49 ` Sebastian Hesselbarth
2012-10-24 20:00 ` Thomas Petazzoni
2012-10-24 20:04 ` Andrew Lunn
2012-10-24 20:05 ` Thomas Petazzoni
2012-10-24 20:14 ` Sebastian Hesselbarth
2012-10-24 20:19 ` Thomas Petazzoni
2012-10-24 14:53 ` [PATCH 2/9] ARM: Kirkwood: Convert iConnect " Andrew Lunn
2012-10-24 14:53 ` [PATCH 3/9] ARM: Kirkwood: Convert dnskw " Andrew Lunn
2012-10-25 22:58 ` Jamie Lentin
2012-10-26 6:01 ` Andrew Lunn
2012-10-26 9:42 ` Jamie Lentin
2012-10-26 10:24 ` Andrew Lunn
2012-10-26 12:30 ` Jamie Lentin
2012-10-24 14:53 ` [PATCH 4/9] ARM: Kirkwood: Convert dockstar " Andrew Lunn
2012-10-24 14:53 ` [PATCH 5/9] ARM: Kirkwood: Convert dreamplug " Andrew Lunn
2012-10-24 14:53 ` [PATCH 6/9] ARM: Kirkwood: Convert GoFlex Net " Andrew Lunn
2012-10-26 17:28 ` Josh Coombs
2012-10-27 8:51 ` Andrew Lunn
2012-10-28 14:31 ` Josh Coombs
2012-10-24 14:53 ` [PATCH 7/9] ARM: Kirkwood: Convert ib62x0 " Andrew Lunn
2012-10-24 20:40 ` Simon Baatz
2012-10-24 14:53 ` [PATCH 8/9] ARM: Kirkwood: Convert lsxl boards " Andrew Lunn
2012-10-24 20:37 ` Michael Walle
2012-10-28 16:40 ` Michael Walle
2012-10-24 14:53 ` [PATCH 9/9] ARM: Kirkwood: Convert IX2-200 " Andrew Lunn
2012-10-24 20:04 ` Thomas Petazzoni
2012-10-24 20:20 ` Andrew Lunn
2012-10-24 20:29 ` Thomas Petazzoni
2012-10-24 15:29 ` [PATCH 0/9] ARM: Kirkwood: Convert " Josh Coombs
2012-10-24 15:35 ` Andrew Lunn
2012-10-24 19:26 ` Thomas Petazzoni
2012-10-24 18:06 ` Michael Walle [this message]
2012-10-24 20:01 ` Andrew Lunn
2012-10-24 20:47 ` Michael Walle
2012-10-24 21:33 ` Thomas Petazzoni
2012-10-25 5:46 ` Andrew Lunn
2012-10-25 6:28 ` Thomas Petazzoni
2012-10-25 7:39 ` Michael Walle
2012-10-25 7:43 ` Thomas Petazzoni
2012-10-25 20:19 ` Michael Walle
2012-10-26 18:06 ` Michael Walle
2012-10-26 18:45 ` Thomas Petazzoni
2012-10-26 20:17 ` Michael Walle
2012-10-27 8:59 ` Andrew Lunn
2012-10-25 22:57 ` Jamie Lentin
2012-10-28 16:57 ` Andrew Lunn
2012-10-28 18:17 ` Michael Walle
2012-10-28 19:50 ` Simon Baatz
2012-10-28 20:01 ` Andrew Lunn
2012-10-28 21:06 ` Jamie Lentin
2012-10-31 22:38 ` Josh Coombs
2012-11-07 16:13 ` [RFC PATCH 0/2] Kirkwood 98dx4122 pinctrl variant Valentin Longchamp
2012-11-07 17:36 ` Andrew Lunn
2012-11-07 16:13 ` [PATCH 1/2] ARM: support 98DX412x kirkwoods with pinctrl Valentin Longchamp
2012-11-07 16:13 ` [PATCH 2/2] ARM: convert the km_kirkwood board to pinctrl Valentin Longchamp
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201210242006.55879.michael@walle.cc \
--to=michael@walle.cc \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).