From: michael@walle.cc (Michael Walle)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 8/9] ARM: Kirkwood: Convert lsxl boards to pinctrl.
Date: Wed, 24 Oct 2012 22:37:44 +0200 [thread overview]
Message-ID: <201210242237.44737.michael@walle.cc> (raw)
In-Reply-To: <1351090434-30499-9-git-send-email-andrew@lunn.ch>
Am Mittwoch 24 Oktober 2012, 16:53:53 schrieb Andrew Lunn:
> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> ---
> arch/arm/boot/dts/kirkwood-lsxl.dtsi | 67
> ++++++++++++++++++++++++++++++++++ arch/arm/mach-kirkwood/board-lsxl.c |
> 19 ----------
> 2 files changed, 67 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
> b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 8fea375..01d6e3a 100644
> --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
> +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
> @@ -6,6 +6,73 @@
> };
>
> ocp at f1000000 {
> + pinctrl: pinctrl at 10000 {
> + compatible = "marvell,88f6281-pinctrl";
> + reg = <0x10000 0x20>;
> +
> + pinctrl-0 = < &pmx_power_hdd &pmx_usb_vbus
> + &pmx_fan_low &pmx_fan_high
> + &pmx_led_function_red &pmx_led_alarm
> + &pmx_led_info &pmx_led_power
> + &pmx_fan_lock &pmx_button_function
> + &pmx_power_switch &pmx_power_auto_switch
> + &pmx_led_function_blue >;
> + pinctrl-names = "default";
> +
> + pmx_power_hdd: pmx-power-hdd {
> + marvell,pins = "mpp10";
> + marvell,function = "gpio";
function is "gpo";
> + };
> + pmx_usb_vbus: pmx-usb-vbus {
> + marvell,pins = "mpp11";
> + marvell,function = "gpio";
> + };
> + pmx_fan_high: pmx-fan-high {
> + marvell,pins = "mpp18";
> + marvell,function = "gpo";
> + };
> + pmx_fan_low: pmx-fan-low {
> + marvell,pins = "mpp19";
> + marvell,function = "gpo";
> + };
> + pmx_led_function_blue: pmx-led-function-blue {
> + marvell,pins = "mpp36";
> + marvell,function = "gpio";
> + };
> + pmx_led_alarm: pmx-led-alarm {
> + marvell,pins = "mpp37";
> + marvell,function = "gpio";
> + };
> + pmx_led_info: pmx-led-info {
> + marvell,pins = "mpp38";
> + marvell,function = "gpio";
> + };
> + pmx_led_power: pmx-led-power {
> + marvell,pins = "mpp39";
> + marvell,function = "gpio";
> + };
> + pmx_fan_lock: pmx-fan-lock {
> + marvell,pins = "mpp40";
> + marvell,function = "gpo";
gpio
> + };
> + pmx_button_function: pmx-button-function {
> + marvell,pins = "mpp41";
> + marvell,function = "gpio";
> + };
> + pmx_power_switch: pmx-power-switch {
> + marvell,pins = "mpp42";
> + marvell,function = "gpio";
> + };
> + pmx_power_auto_switch: pmx-power-auto-switch {
> + marvell,pins = "mpp43";
> + marvell,function = "gpio";
> + };
> + pmx_led_function_red: pmx-led-function_red {
> + marvell,pins = "mpp43";
> + marvell,function = "gpio";
> + };
> +
> + };
> sata at 80000 {
> status = "okay";
> nr-ports = <1>;
> diff --git a/arch/arm/mach-kirkwood/board-lsxl.c
> b/arch/arm/mach-kirkwood/board-lsxl.c index 83d8975..868bdb0 100644
> --- a/arch/arm/mach-kirkwood/board-lsxl.c
> +++ b/arch/arm/mach-kirkwood/board-lsxl.c
> @@ -26,7 +26,6 @@
> #include <asm/mach/arch.h>
> #include <mach/kirkwood.h>
> #include "common.h"
> -#include "mpp.h"
>
> static struct mv643xx_eth_platform_data lsxl_ge00_data = {
> .phy_addr = MV643XX_ETH_PHY_ADDR(0),
> @@ -36,23 +35,6 @@ static struct mv643xx_eth_platform_data lsxl_ge01_data =
> { .phy_addr = MV643XX_ETH_PHY_ADDR(8),
> };
>
> -static unsigned int lsxl_mpp_config[] __initdata = {
> - MPP10_GPO, /* HDD Power Enable */
> - MPP11_GPIO, /* USB Vbus Enable */
> - MPP18_GPO, /* FAN High Enable# */
> - MPP19_GPO, /* FAN Low Enable# */
> - MPP36_GPIO, /* Function Blue LED */
> - MPP37_GPIO, /* Alarm LED */
> - MPP38_GPIO, /* Info LED */
> - MPP39_GPIO, /* Power LED */
> - MPP40_GPIO, /* Fan Lock */
> - MPP41_GPIO, /* Function Button */
> - MPP42_GPIO, /* Power Switch */
> - MPP43_GPIO, /* Power Auto Switch */
> - MPP48_GPIO, /* Function Red LED */
> - 0
> -};
> -
> #define LSXL_GPIO_FAN_HIGH 18
> #define LSXL_GPIO_FAN_LOW 19
> #define LSXL_GPIO_FAN_LOCK 40
> @@ -119,7 +101,6 @@ void __init lsxl_init(void)
> /*
> * Basic setup. Needs to be called early.
> */
> - kirkwood_mpp_conf(lsxl_mpp_config);
>
> /* usb and sata power on */
> gpio_set_value(LSXL_GPIO_USB_POWER, 1);
--
Michael
next prev parent reply other threads:[~2012-10-24 20:37 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-24 14:53 [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl Andrew Lunn
2012-10-24 14:53 ` [PATCH 1/9] ARM: Kirkwood: Convert TS219 " Andrew Lunn
2012-10-24 19:31 ` Thomas Petazzoni
2012-10-24 19:49 ` Sebastian Hesselbarth
2012-10-24 20:00 ` Thomas Petazzoni
2012-10-24 20:04 ` Andrew Lunn
2012-10-24 20:05 ` Thomas Petazzoni
2012-10-24 20:14 ` Sebastian Hesselbarth
2012-10-24 20:19 ` Thomas Petazzoni
2012-10-24 14:53 ` [PATCH 2/9] ARM: Kirkwood: Convert iConnect " Andrew Lunn
2012-10-24 14:53 ` [PATCH 3/9] ARM: Kirkwood: Convert dnskw " Andrew Lunn
2012-10-25 22:58 ` Jamie Lentin
2012-10-26 6:01 ` Andrew Lunn
2012-10-26 9:42 ` Jamie Lentin
2012-10-26 10:24 ` Andrew Lunn
2012-10-26 12:30 ` Jamie Lentin
2012-10-24 14:53 ` [PATCH 4/9] ARM: Kirkwood: Convert dockstar " Andrew Lunn
2012-10-24 14:53 ` [PATCH 5/9] ARM: Kirkwood: Convert dreamplug " Andrew Lunn
2012-10-24 14:53 ` [PATCH 6/9] ARM: Kirkwood: Convert GoFlex Net " Andrew Lunn
2012-10-26 17:28 ` Josh Coombs
2012-10-27 8:51 ` Andrew Lunn
2012-10-28 14:31 ` Josh Coombs
2012-10-24 14:53 ` [PATCH 7/9] ARM: Kirkwood: Convert ib62x0 " Andrew Lunn
2012-10-24 20:40 ` Simon Baatz
2012-10-24 14:53 ` [PATCH 8/9] ARM: Kirkwood: Convert lsxl boards " Andrew Lunn
2012-10-24 20:37 ` Michael Walle [this message]
2012-10-28 16:40 ` Michael Walle
2012-10-24 14:53 ` [PATCH 9/9] ARM: Kirkwood: Convert IX2-200 " Andrew Lunn
2012-10-24 20:04 ` Thomas Petazzoni
2012-10-24 20:20 ` Andrew Lunn
2012-10-24 20:29 ` Thomas Petazzoni
2012-10-24 15:29 ` [PATCH 0/9] ARM: Kirkwood: Convert " Josh Coombs
2012-10-24 15:35 ` Andrew Lunn
2012-10-24 19:26 ` Thomas Petazzoni
2012-10-24 18:06 ` Michael Walle
2012-10-24 20:01 ` Andrew Lunn
2012-10-24 20:47 ` Michael Walle
2012-10-24 21:33 ` Thomas Petazzoni
2012-10-25 5:46 ` Andrew Lunn
2012-10-25 6:28 ` Thomas Petazzoni
2012-10-25 7:39 ` Michael Walle
2012-10-25 7:43 ` Thomas Petazzoni
2012-10-25 20:19 ` Michael Walle
2012-10-26 18:06 ` Michael Walle
2012-10-26 18:45 ` Thomas Petazzoni
2012-10-26 20:17 ` Michael Walle
2012-10-27 8:59 ` Andrew Lunn
2012-10-25 22:57 ` Jamie Lentin
2012-10-28 16:57 ` Andrew Lunn
2012-10-28 18:17 ` Michael Walle
2012-10-28 19:50 ` Simon Baatz
2012-10-28 20:01 ` Andrew Lunn
2012-10-28 21:06 ` Jamie Lentin
2012-10-31 22:38 ` Josh Coombs
2012-11-07 16:13 ` [RFC PATCH 0/2] Kirkwood 98dx4122 pinctrl variant Valentin Longchamp
2012-11-07 17:36 ` Andrew Lunn
2012-11-07 16:13 ` [PATCH 1/2] ARM: support 98DX412x kirkwoods with pinctrl Valentin Longchamp
2012-11-07 16:13 ` [PATCH 2/2] ARM: convert the km_kirkwood board to pinctrl Valentin Longchamp
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201210242237.44737.michael@walle.cc \
--to=michael@walle.cc \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).