[PATCH 0/9] ARM: Kirkwood: Convert to pinctrl

[michael@walle.cc (Michael Walle)]

Am Donnerstag 25 Oktober 2012, 09:43:43 schrieb Thomas Petazzoni:
> Dear Michael Walle,
> 
> On Thu, 25 Oct 2012 09:39:13 +0200, Michael Walle wrote:
> > LSXL_GPIO_USB_POWER and LSXL_GPIO_HDD_POWER switches the power on the USB
> > and SATA connector. So they are not needed to be set before the driver
> > probes, at least in my case here.
> 
> Ok.
> 
> > But i can imagine boards where you have to enable some kind of
> > buffer/muxer/etc which are controlled by GPIO pins. And I don't think
> > that should be part of the actual driver, because that would be highly
> > board dependant.
> 
> You'd have to provide a more specific example so I can imagine how it
> will be solved. But for example, if you have a GPIO-controlled muxer
> for an I2C bus, then the I2C devices behind the muxer are described as
> sub-devices of the muxer, so the probing order is correct.

Assume an ethernet phy which needs a valid reference clock before it can be 
probed for example. Of course, this is pure theoretical. But should we impose 
restrictions on when we can do the GPIO settings? Esp. since it worked before 
(i guess).

> Of course, I'm not pretending I have ready-to-use solutions for all
> situations, but I think we can solve this problem on a case-by-case
> basis.

> Regardless of those GPIOs, did you solve the hang that happened even
> when you removed the gpio_set_value() calls? Or is it still a problem
> currently?
Still a problem. Haven't really looket into i atm. Hopefully i find some time 
this weekend.

-- 
michael