[PATCH] i2c: mxs: remove broken PIOQUEUE support

[w.sang@pengutronix.de (Wolfram Sang)]

On Thu, Nov 01, 2012 at 03:28:17PM +0100, Marek Vasut wrote:
> Dear Wolfram Sang,
> 
> > This I2C master can do DMA and PIOQUEUE (PIO with FIFO). Originally,
> > only PIOQEUE
> 
> PIOQUEUE ;-)

Yup, right!

> 
> > was supported, then DMA support was added. The original
> > intention was to keep PIOQUEUE since it has less overhead what is nice
> > for small transfers. However, runtime switching between PIOQEUE and DMA
> > depending on the transfer size never worked despite a lot of trying.
> > Since PIOQUEUE mode itself was flaky (polling at places where interrupts
> > failed to work) and the implementation also imposed a size limit for
> > transfers, it is best to remove the support altogether which makes the
> > driver a lot cleaner and more robust. If somebody really wants less
> > overhead, plain PIO mode could still be implemented with the addidtional
> > advantage that this mode is also available on MX23, too.
> 
> Yes, looks to be the way to go.
> 
> Reviewed-by: Marek Vasut <marex@denx.de>

Thanks.

BTW have you tried combining all i2c-messages (msgs[]) of the transfer
into one DMA chain? That would reduce overhead, too, no?

Regards,

   Wolfram

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20121101/eaefaebd/attachment.sig>