[PATCH 0/8] ARM: OMAP: Clean-up DMTIMER

[PATCH 0/8] ARM: OMAP: Clean-up DMTIMER

[Jon Hunter]

This series cleans-up the DMTIMER code and moves the DMTIMER header
from plat/dmtimer.h to plat-omap/dmtimer.h in preparation for single
zImage support.

This series in based upon DMTIMER fixes series [1].

Tested on OMAP5912 OSK, OMAP3430 Beagle and OMAP4430 Panda.
Testing includes ...
1. Booting kernel on above boards
2. Checking the timer counter is incrementing when configuring and starting
   a timer
3. Checking the timer overflow interrupt when timer expires.
4. Using different clock sources to operate the timer with.

This has also been boot tested on the AM335x Beagle Bone.

[1] http://marc.info/?l=linux-omap&m=135275633628412&w=2

Jon Hunter (8):
  ARM: OMAP: Clean-up dmtimer reset code
  ARM: OMAP: Define omap_dm_timer_prepare function as static
  ARM: OMAP: Don't store timers physical address
  ARM: OMAP2+: Remove unnecessary local variable in timer code
  ARM: OMAP: Remove unnecessary omap_dm_timer structure declaration
  ARM: OMAP: Add platform data header for DMTIMERs
  ARM: OMAP: Remove unnecessary inclusion of dmtimer.h
  ARM: OMAP: Move plat/dmtimer.h to plat-omap/dmtimer.h

 arch/arm/mach-omap1/pm.c                           |    2 +-
 arch/arm/mach-omap1/timer.c                        |    3 +-
 arch/arm/mach-omap1/timer32k.c                     |    1 -
 arch/arm/mach-omap2/omap_hwmod_2420_data.c         |    1 -
 arch/arm/mach-omap2/omap_hwmod_2430_data.c         |    1 -
 arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c |    2 +-
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c         |    2 +-
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c         |    2 +-
 arch/arm/mach-omap2/pm-debug.c                     |    1 -
 arch/arm/mach-omap2/timer.c                        |   28 +-
 arch/arm/plat-omap/dmtimer.c                       |   56 ++-
 arch/arm/plat-omap/include/plat-omap/dmtimer.h     |  420 ++++++++++++++++++
 arch/arm/plat-omap/include/plat/dmtimer.h          |  450 --------------------
 drivers/staging/tidspbridge/core/dsp-clock.c       |    2 +-
 drivers/staging/tidspbridge/core/ue_deh.c          |    1 -
 include/linux/platform_data/dmtimer-omap.h         |   31 ++
 16 files changed, 506 insertions(+), 497 deletions(-)
 create mode 100644 arch/arm/plat-omap/include/plat-omap/dmtimer.h
 delete mode 100644 arch/arm/plat-omap/include/plat/dmtimer.h
 create mode 100644 include/linux/platform_data/dmtimer-omap.h

-- 
1.7.9.5

[PATCH 1/8] ARM: OMAP: Clean-up dmtimer reset code

[Jon Hunter]

Only OMAP1 devices use the omap_dm_timer_reset() and so require the
omap_dm_timer_wait_for_reset() and __omap_dm_timer_reset() functions.
Therefore combine these into a single function called omap_dm_timer_reset()
and simplify the code.

The omap_dm_timer_reset() function is now the only place that is using the
omap_dm_timer structure member "sys_stat". Therefore, remove this member and
just use the register offset definition to simplify and clean-up the code. The
TISTAT register is only present on revision 1 timers and so check for this in
the omap_dm_timer_reset() function.

Please note that for OMAP1 devices, the TIOCP_CFG register does not have the
clock-activity field and so when we reset the timer for an OMAP1 device we
only need to configure the idle-mode field in the TIOCP_CFG register.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
 arch/arm/plat-omap/dmtimer.c              |   50 ++++++++++++++++++-----------
 arch/arm/plat-omap/include/plat/dmtimer.h |   23 -------------
 2 files changed, 31 insertions(+), 42 deletions(-)

diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 9deeb30..4c28452 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -99,32 +99,39 @@ static void omap_timer_restore_context(struct omap_dm_timer *timer)
 				timer->context.tclr);
 }
 
-static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer)
+static int omap_dm_timer_reset(struct omap_dm_timer *timer)
 {
-	int c;
+	u32 l, timeout = 100000;
 
-	if (!timer->sys_stat)
-		return;
+	if (timer->revision != 1)
+		return -EINVAL;
 
-	c = 0;
-	while (!(__raw_readl(timer->sys_stat) & 1)) {
-		c++;
-		if (c > 100000) {
-			printk(KERN_ERR "Timer failed to reset\n");
-			return;
-		}
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
+
+	do {
+		l = __omap_dm_timer_read(timer,
+					 OMAP_TIMER_V1_SYS_STAT_OFFSET, 0);
+	} while (!l && timeout--);
+
+	if (!timeout) {
+		dev_err(&timer->pdev->dev, "Timer failed to reset\n");
+		return -ETIMEDOUT;
 	}
-}
 
-static void omap_dm_timer_reset(struct omap_dm_timer *timer)
-{
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
-	omap_dm_timer_wait_for_reset(timer);
-	__omap_dm_timer_reset(timer, 0, 0);
+	/* Configure timer for smart-idle mode */
+	l = __omap_dm_timer_read(timer, OMAP_TIMER_OCP_CFG_OFFSET, 0);
+	l |= 0x2 << 0x3;
+	__omap_dm_timer_write(timer, OMAP_TIMER_OCP_CFG_OFFSET, l, 0);
+
+	timer->posted = 0;
+
+	return 0;
 }
 
 int omap_dm_timer_prepare(struct omap_dm_timer *timer)
 {
+	int rc;
+
 	/*
 	 * FIXME: OMAP1 devices do not use the clock framework for dmtimers so
 	 * do not call clk_get() for these devices.
@@ -140,8 +147,13 @@ int omap_dm_timer_prepare(struct omap_dm_timer *timer)
 
 	omap_dm_timer_enable(timer);
 
-	if (timer->capability & OMAP_TIMER_NEEDS_RESET)
-		omap_dm_timer_reset(timer);
+	if (timer->capability & OMAP_TIMER_NEEDS_RESET) {
+		rc = omap_dm_timer_reset(timer);
+		if (rc) {
+			omap_dm_timer_disable(timer);
+			return rc;
+		}
+	}
 
 	__omap_dm_timer_enable_posted(timer);
 	omap_dm_timer_disable(timer);
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index 05a36e1..c5c890d 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -267,7 +267,6 @@ struct omap_dm_timer {
 	struct clk *fclk;
 
 	void __iomem	*io_base;
-	void __iomem	*sys_stat;	/* TISTAT timer status */
 	void __iomem	*irq_stat;	/* TISR/IRQSTATUS interrupt status */
 	void __iomem	*irq_ena;	/* irq enable */
 	void __iomem	*irq_dis;	/* irq disable, only on v2 ip */
@@ -317,8 +316,6 @@ static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
 	tidr = __raw_readl(timer->io_base);
 	if (!(tidr >> 16)) {
 		timer->revision = 1;
-		timer->sys_stat = timer->io_base +
-				OMAP_TIMER_V1_SYS_STAT_OFFSET;
 		timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
 		timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
 		timer->irq_dis = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
@@ -326,7 +323,6 @@ static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
 		timer->func_base = timer->io_base;
 	} else {
 		timer->revision = 2;
-		timer->sys_stat = NULL;
 		timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
 		timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
 		timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;
@@ -337,25 +333,6 @@ static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
 	}
 }
 
-/* Assumes the source clock has been set by caller */
-static inline void __omap_dm_timer_reset(struct omap_dm_timer *timer,
-					int autoidle, int wakeup)
-{
-	u32 l;
-
-	l = __raw_readl(timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET);
-	l |= 0x02 << 3;  /* Set to smart-idle mode */
-	l |= 0x2 << 8;   /* Set clock activity to perserve f-clock on idle */
-
-	if (autoidle)
-		l |= 0x1 << 0;
-
-	if (wakeup)
-		l |= 1 << 2;
-
-	__raw_writel(l, timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET);
-}
-
 /*
  * __omap_dm_timer_enable_posted - enables write posted mode
  * @timer:      pointer to timer instance handle
-- 
1.7.9.5

[PATCH 2/8] ARM: OMAP: Define omap_dm_timer_prepare function as static

[Jon Hunter]

The omap_dm_timer_prepare function is a local function only used in the
dmtimer.c file. Therefore, make this a static function and remove its
declaration from the dmtimer.h file.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
 arch/arm/plat-omap/dmtimer.c              |    2 +-
 arch/arm/plat-omap/include/plat/dmtimer.h |    2 --
 2 files changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 4c28452..efe4774 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -128,7 +128,7 @@ static int omap_dm_timer_reset(struct omap_dm_timer *timer)
 	return 0;
 }
 
-int omap_dm_timer_prepare(struct omap_dm_timer *timer)
+static int omap_dm_timer_prepare(struct omap_dm_timer *timer)
 {
 	int rc;
 
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index c5c890d..40383b6 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -286,8 +286,6 @@ struct omap_dm_timer {
 	struct list_head node;
 };
 
-int omap_dm_timer_prepare(struct omap_dm_timer *timer);
-
 static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
 						int posted)
 {
-- 
1.7.9.5

[PATCH 3/8] ARM: OMAP: Don't store timers physical address

[Jon Hunter]

The OMAP2+ system timer code stores the physical address of the timer
but never uses it. Remove this and clean-up the code by removing the
local variable "size" and changing the names of the local variables
mem_rsrc and irq_rsrc to mem and irq, respectively.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
 arch/arm/mach-omap2/timer.c               |   13 +++++--------
 arch/arm/plat-omap/include/plat/dmtimer.h |    1 -
 2 files changed, 5 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 099e406..e9fcc5f 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -245,8 +245,7 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 	const char *oh_name;
 	struct device_node *np;
 	struct omap_hwmod *oh;
-	struct resource irq_rsrc, mem_rsrc;
-	size_t size;
+	struct resource irq, mem;
 	int res = 0;
 	int r;
 
@@ -280,20 +279,18 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 
 	if (!of_have_populated_dt()) {
 		r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL,
-						   &irq_rsrc);
+						   &irq);
 		if (r)
 			return -ENXIO;
-		timer->irq = irq_rsrc.start;
+		timer->irq = irq.start;
 
 		r = omap_hwmod_get_resource_byname(oh, IORESOURCE_MEM, NULL,
-						   &mem_rsrc);
+						   &mem);
 		if (r)
 			return -ENXIO;
-		timer->phys_base = mem_rsrc.start;
-		size = mem_rsrc.end - mem_rsrc.start;
 
 		/* Static mapping, never released */
-		timer->io_base = ioremap(timer->phys_base, size);
+		timer->io_base = ioremap(mem.start, mem.end - mem.start);
 	}
 
 	if (!timer->io_base)
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index 40383b6..b60e2b6 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -261,7 +261,6 @@ int omap_dm_timers_active(void);
 		(_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT))
 
 struct omap_dm_timer {
-	unsigned long phys_base;
 	int id;
 	int irq;
 	struct clk *fclk;
-- 
1.7.9.5

[PATCH 4/8] ARM: OMAP2+: Remove unnecessary local variable in timer code

[Jon Hunter]

The function omap_dm_timer_init_one() declares two local variables of
type int that are used to store the return value of functions called.
One such local variable is sufficient and so remove one of these local
variables.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
 arch/arm/mach-omap2/timer.c |   11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index e9fcc5f..1a662df 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -246,8 +246,7 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 	struct device_node *np;
 	struct omap_hwmod *oh;
 	struct resource irq, mem;
-	int res = 0;
-	int r;
+	int r = 0;
 
 	if (of_have_populated_dt()) {
 		np = omap_get_timer_dt(omap_timer_match, NULL);
@@ -307,10 +306,10 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 
 		src = clk_get(NULL, fck_source);
 		if (IS_ERR(src)) {
-			res = -EINVAL;
+			r = -EINVAL;
 		} else {
-			res = clk_set_parent(timer->fclk, src);
-			if (IS_ERR_VALUE(res))
+			r = clk_set_parent(timer->fclk, src);
+			if (IS_ERR_VALUE(r))
 				pr_warn("%s: %s cannot set source\n",
 					__func__, oh->name);
 			clk_put(src);
@@ -331,7 +330,7 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 	timer->rate = clk_get_rate(timer->fclk);
 	timer->reserved = 1;
 
-	return res;
+	return r;
 }
 
 static void __init omap2_gp_clockevent_init(int gptimer_id,
-- 
1.7.9.5

[PATCH 5/8] ARM: OMAP: Remove unnecessary omap_dm_timer structure declaration

[Jon Hunter]

Remove unnecessary declaration of structure omap_dm_timer from dmtimer.h and
move the actual declaration of structure omap_dm_timer towards top of dmtimer.h
to avoid any compilation errors.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
 arch/arm/plat-omap/include/plat/dmtimer.h |   52 ++++++++++++++---------------
 1 file changed, 25 insertions(+), 27 deletions(-)

diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index b60e2b6..b3cd91b 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -79,8 +79,6 @@ struct omap_timer_capability_dev_attr {
 	u32 timer_capability;
 };
 
-struct omap_dm_timer;
-
 struct timer_regs {
 	u32 tidr;
 	u32 tier;
@@ -101,6 +99,31 @@ struct timer_regs {
 	u32 towr;
 };
 
+struct omap_dm_timer {
+	int id;
+	int irq;
+	struct clk *fclk;
+
+	void __iomem	*io_base;
+	void __iomem	*irq_stat;	/* TISR/IRQSTATUS interrupt status */
+	void __iomem	*irq_ena;	/* irq enable */
+	void __iomem	*irq_dis;	/* irq disable, only on v2 ip */
+	void __iomem	*pend;		/* write pending */
+	void __iomem	*func_base;	/* function register base */
+
+	unsigned long rate;
+	unsigned reserved:1;
+	unsigned posted:1;
+	struct timer_regs context;
+	int (*get_context_loss_count)(struct device *);
+	int ctx_loss_count;
+	int revision;
+	u32 capability;
+	u32 errata;
+	struct platform_device *pdev;
+	struct list_head node;
+};
+
 struct dmtimer_platform_data {
 	/* set_timer_src - Only used for OMAP1 devices */
 	int (*set_timer_src)(struct platform_device *pdev, int source);
@@ -260,31 +283,6 @@ int omap_dm_timers_active(void);
 #define OMAP_TIMER_TICK_INT_MASK_COUNT_REG				\
 		(_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT))
 
-struct omap_dm_timer {
-	int id;
-	int irq;
-	struct clk *fclk;
-
-	void __iomem	*io_base;
-	void __iomem	*irq_stat;	/* TISR/IRQSTATUS interrupt status */
-	void __iomem	*irq_ena;	/* irq enable */
-	void __iomem	*irq_dis;	/* irq disable, only on v2 ip */
-	void __iomem	*pend;		/* write pending */
-	void __iomem	*func_base;	/* function register base */
-
-	unsigned long rate;
-	unsigned reserved:1;
-	unsigned posted:1;
-	struct timer_regs context;
-	int (*get_context_loss_count)(struct device *);
-	int ctx_loss_count;
-	int revision;
-	u32 capability;
-	u32 errata;
-	struct platform_device *pdev;
-	struct list_head node;
-};
-
 static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
 						int posted)
 {
-- 
1.7.9.5

[PATCH 6/8] ARM: OMAP: Add platform data header for DMTIMERs

[Jon Hunter]

Move definition of dmtimer platform data structure in to its own header
under <linux/platform_data>.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
 arch/arm/mach-omap1/timer.c                |    1 +
 arch/arm/mach-omap2/timer.c                |    2 ++
 arch/arm/plat-omap/dmtimer.c               |    2 ++
 arch/arm/plat-omap/include/plat/dmtimer.h  |    8 -------
 include/linux/platform_data/dmtimer-omap.h |   31 ++++++++++++++++++++++++++++
 5 files changed, 36 insertions(+), 8 deletions(-)
 create mode 100644 include/linux/platform_data/dmtimer-omap.h

diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c
index cdeb9d3..bde7a35 100644
--- a/arch/arm/mach-omap1/timer.c
+++ b/arch/arm/mach-omap1/timer.c
@@ -25,6 +25,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/dmtimer-omap.h>
 
 #include <mach/irqs.h>
 
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 1a662df..4daa8b4 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -39,6 +39,8 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/dmtimer-omap.h>
 
 #include <asm/mach/time.h>
 #include <asm/smp_twd.h>
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index efe4774..89585c2 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -43,6 +43,8 @@
 #include <linux/pm_runtime.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/dmtimer-omap.h>
 
 #include <plat/dmtimer.h>
 
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index b3cd91b..a3fbc48 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -124,14 +124,6 @@ struct omap_dm_timer {
 	struct list_head node;
 };
 
-struct dmtimer_platform_data {
-	/* set_timer_src - Only used for OMAP1 devices */
-	int (*set_timer_src)(struct platform_device *pdev, int source);
-	u32 timer_errata;
-	u32 timer_capability;
-	int (*get_context_loss_count)(struct device *);
-};
-
 int omap_dm_timer_reserve_systimer(int id);
 struct omap_dm_timer *omap_dm_timer_request(void);
 struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
diff --git a/include/linux/platform_data/dmtimer-omap.h b/include/linux/platform_data/dmtimer-omap.h
new file mode 100644
index 0000000..a19b78d
--- /dev/null
+++ b/include/linux/platform_data/dmtimer-omap.h
@@ -0,0 +1,31 @@
+/*
+ * DMTIMER platform data for TI OMAP platforms
+ *
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Jon Hunter <jon-hunter@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __PLATFORM_DATA_DMTIMER_OMAP_H__
+#define __PLATFORM_DATA_DMTIMER_OMAP_H__
+
+struct dmtimer_platform_data {
+	/* set_timer_src - Only used for OMAP1 devices */
+	int (*set_timer_src)(struct platform_device *pdev, int source);
+	u32 timer_capability;
+	u32 timer_errata;
+	int (*get_context_loss_count)(struct device *);
+};
+
+#endif /* __PLATFORM_DATA_DMTIMER_OMAP_H__ */
-- 
1.7.9.5

[PATCH 7/8] ARM: OMAP: Remove unnecessary inclusion of dmtimer.h

[Jon Hunter]

Some source files are including dmtimer.h but not actually using any dmtimer
definitions or functions. Therefore, remove the inclusion dmtimer.h from these
source files.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
 arch/arm/mach-omap1/timer32k.c             |    1 -
 arch/arm/mach-omap2/omap_hwmod_2420_data.c |    1 -
 arch/arm/mach-omap2/omap_hwmod_2430_data.c |    1 -
 arch/arm/mach-omap2/pm-debug.c             |    1 -
 drivers/staging/tidspbridge/core/ue_deh.c  |    1 -
 5 files changed, 5 deletions(-)

diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 8936819..41152fa 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -51,7 +51,6 @@
 #include <asm/mach/time.h>
 
 #include <plat/counter-32k.h>
-#include <plat/dmtimer.h>
 
 #include <mach/hardware.h>
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index a8b3368..e8efe3d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -17,7 +17,6 @@
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include <plat-omap/dma-omap.h>
-#include <plat/dmtimer.h>
 
 #include "omap_hwmod.h"
 #include "l3_2xxx.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index dc768c5..32d17e3 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -18,7 +18,6 @@
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include <plat-omap/dma-omap.h>
-#include <plat/dmtimer.h>
 
 #include "omap_hwmod.h"
 #include "mmc.h"
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 3cf4fdf..e2c291f 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -30,7 +30,6 @@
 #include "clock.h"
 #include "powerdomain.h"
 #include "clockdomain.h"
-#include <plat/dmtimer.h>
 #include "omap-pm.h"
 
 #include "soc.h"
diff --git a/drivers/staging/tidspbridge/core/ue_deh.c b/drivers/staging/tidspbridge/core/ue_deh.c
index 3d28b23..6aea6f1 100644
--- a/drivers/staging/tidspbridge/core/ue_deh.c
+++ b/drivers/staging/tidspbridge/core/ue_deh.c
@@ -19,7 +19,6 @@
 
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
-#include <plat/dmtimer.h>
 
 #include <dspbridge/dbdefs.h>
 #include <dspbridge/dspdeh.h>
-- 
1.7.9.5

[PATCH 7/8] ARM: OMAP: Remove unnecessary inclusion of dmtimer.h

[Jon Hunter]

On 11/13/2012 12:13 PM, Jon Hunter wrote:
> Some source files are including dmtimer.h but not actually using any dmtimer
> definitions or functions. Therefore, remove the inclusion dmtimer.h from these
> source files.
> 
> Signed-off-by: Jon Hunter <jon-hunter@ti.com>
> ---
>  arch/arm/mach-omap1/timer32k.c             |    1 -
>  arch/arm/mach-omap2/omap_hwmod_2420_data.c |    1 -
>  arch/arm/mach-omap2/omap_hwmod_2430_data.c |    1 -
>  arch/arm/mach-omap2/pm-debug.c             |    1 -
>  drivers/staging/tidspbridge/core/ue_deh.c  |    1 -
>  5 files changed, 5 deletions(-)
> 
> diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
> index 8936819..41152fa 100644
> --- a/arch/arm/mach-omap1/timer32k.c
> +++ b/arch/arm/mach-omap1/timer32k.c
> @@ -51,7 +51,6 @@
>  #include <asm/mach/time.h>
>  
>  #include <plat/counter-32k.h>
> -#include <plat/dmtimer.h>
>  
>  #include <mach/hardware.h>
>  
> diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
> index a8b3368..e8efe3d 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
> @@ -17,7 +17,6 @@
>  #include <linux/platform_data/spi-omap2-mcspi.h>
>  
>  #include <plat-omap/dma-omap.h>
> -#include <plat/dmtimer.h>
>  
>  #include "omap_hwmod.h"
>  #include "l3_2xxx.h"
> diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
> index dc768c5..32d17e3 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
> @@ -18,7 +18,6 @@
>  #include <linux/platform_data/spi-omap2-mcspi.h>
>  
>  #include <plat-omap/dma-omap.h>
> -#include <plat/dmtimer.h>
>  
>  #include "omap_hwmod.h"
>  #include "mmc.h"
> diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
> index 3cf4fdf..e2c291f 100644
> --- a/arch/arm/mach-omap2/pm-debug.c
> +++ b/arch/arm/mach-omap2/pm-debug.c
> @@ -30,7 +30,6 @@
>  #include "clock.h"
>  #include "powerdomain.h"
>  #include "clockdomain.h"
> -#include <plat/dmtimer.h>
>  #include "omap-pm.h"
>  
>  #include "soc.h"
> diff --git a/drivers/staging/tidspbridge/core/ue_deh.c b/drivers/staging/tidspbridge/core/ue_deh.c
> index 3d28b23..6aea6f1 100644
> --- a/drivers/staging/tidspbridge/core/ue_deh.c
> +++ b/drivers/staging/tidspbridge/core/ue_deh.c
> @@ -19,7 +19,6 @@
>  
>  #include <linux/kernel.h>
>  #include <linux/interrupt.h>
> -#include <plat/dmtimer.h>
>  
>  #include <dspbridge/dbdefs.h>
>  #include <dspbridge/dspdeh.h>

Hi Omar, I should have had you in copy on this one. Are you ok with the
removal of the above dmtimer.h include? It does not appear that this
file needs to include dmtimer.h.

Is it ok for this to go through Tony's tree? If so, care to ACK?

Cheers
Jon

[PATCH 7/8] ARM: OMAP: Remove unnecessary inclusion of dmtimer.h

[Omar Ramirez Luna]

Hi Jon,

On 14 November 2012 09:53, Jon Hunter <jon-hunter@ti.com> wrote:
>> diff --git a/drivers/staging/tidspbridge/core/ue_deh.c b/drivers/staging/tidspbridge/core/ue_deh.c
>> index 3d28b23..6aea6f1 100644
>> --- a/drivers/staging/tidspbridge/core/ue_deh.c
>> +++ b/drivers/staging/tidspbridge/core/ue_deh.c
>> @@ -19,7 +19,6 @@
>>
>>  #include <linux/kernel.h>
>>  #include <linux/interrupt.h>
>> -#include <plat/dmtimer.h>
>>
>>  #include <dspbridge/dbdefs.h>
>>  #include <dspbridge/dspdeh.h>
>
> Hi Omar, I should have had you in copy on this one. Are you ok with the
> removal of the above dmtimer.h include? It does not appear that this
> file needs to include dmtimer.h.

Indeed, we don't use it here.

> Is it ok for this to go through Tony's tree? If so, care to ACK?

Looks fine to me, but I believe you will want to let Greg know if this
patch will bypass staging tree.

Acked-by: Omar Ramirez Luna <omar.luna@linaro.org>

Cheers,

Omar

[PATCH 7/8] ARM: OMAP: Remove unnecessary inclusion of dmtimer.h

[Greg Kroah-Hartman]

On Thu, Nov 15, 2012 at 02:42:13PM -0600, Omar Ramirez Luna wrote:
> Hi Jon,
> 
> On 14 November 2012 09:53, Jon Hunter <jon-hunter@ti.com> wrote:
> >> diff --git a/drivers/staging/tidspbridge/core/ue_deh.c b/drivers/staging/tidspbridge/core/ue_deh.c
> >> index 3d28b23..6aea6f1 100644
> >> --- a/drivers/staging/tidspbridge/core/ue_deh.c
> >> +++ b/drivers/staging/tidspbridge/core/ue_deh.c
> >> @@ -19,7 +19,6 @@
> >>
> >>  #include <linux/kernel.h>
> >>  #include <linux/interrupt.h>
> >> -#include <plat/dmtimer.h>
> >>
> >>  #include <dspbridge/dbdefs.h>
> >>  #include <dspbridge/dspdeh.h>
> >
> > Hi Omar, I should have had you in copy on this one. Are you ok with the
> > removal of the above dmtimer.h include? It does not appear that this
> > file needs to include dmtimer.h.
> 
> Indeed, we don't use it here.
> 
> > Is it ok for this to go through Tony's tree? If so, care to ACK?
> 
> Looks fine to me, but I believe you will want to let Greg know if this
> patch will bypass staging tree.

That's fine with me for such trivial stuff.

greg k-h

[PATCH 8/8] ARM: OMAP: Move plat/dmtimer.h to plat-omap/dmtimer.h

[Jon Hunter]

Move plat/dmtimer.h to plat-omap/dmtimer.h in order to support a single
zImage for ARM devices.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
 arch/arm/mach-omap1/pm.c                           |    2 +-
 arch/arm/mach-omap1/timer.c                        |    2 +-
 arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c |    2 +-
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c         |    2 +-
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c         |    2 +-
 arch/arm/mach-omap2/timer.c                        |    2 +-
 arch/arm/plat-omap/dmtimer.c                       |    2 +-
 arch/arm/plat-omap/include/plat-omap/dmtimer.h     |  420 ++++++++++++++++++++
 arch/arm/plat-omap/include/plat/dmtimer.h          |  414 -------------------
 drivers/staging/tidspbridge/core/dsp-clock.c       |    2 +-
 10 files changed, 428 insertions(+), 422 deletions(-)
 create mode 100644 arch/arm/plat-omap/include/plat-omap/dmtimer.h
 delete mode 100644 arch/arm/plat-omap/include/plat/dmtimer.h

diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 66d663a..ecc1f76 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -53,7 +53,7 @@
 #include <mach/tc.h>
 #include <mach/mux.h>
 #include <plat-omap/dma-omap.h>
-#include <plat/dmtimer.h>
+#include <plat-omap/dmtimer.h>
 
 #include <mach/irqs.h>
 
diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c
index bde7a35..0089fb7 100644
--- a/arch/arm/mach-omap1/timer.c
+++ b/arch/arm/mach-omap1/timer.c
@@ -29,7 +29,7 @@
 
 #include <mach/irqs.h>
 
-#include <plat/dmtimer.h>
+#include <plat-omap/dmtimer.h>
 
 #define OMAP1610_GPTIMER1_BASE		0xfffb1400
 #define OMAP1610_GPTIMER2_BASE		0xfffb1c00
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index 0db8f45..a4169b6 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -11,7 +11,7 @@
 
 #include <linux/platform_data/gpio-omap.h>
 #include <plat-omap/dma-omap.h>
-#include <plat/dmtimer.h>
+#include <plat-omap/dmtimer.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include "omap_hwmod.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index addc1c2..ff835ed 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -24,7 +24,7 @@
 #include "l4_3xxx.h"
 #include <linux/platform_data/asoc-ti-mcbsp.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
-#include <plat/dmtimer.h>
+#include <plat-omap/dmtimer.h>
 #include <plat/iommu.h>
 
 #include "am35xx.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 399f4ce..2750efe 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -27,7 +27,7 @@
 
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
-#include <plat/dmtimer.h>
+#include <plat-omap/dmtimer.h>
 #include <plat/iommu.h>
 
 #include "omap_hwmod.h"
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 4daa8b4..b8ee64a 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -50,7 +50,7 @@
 #include "omap_hwmod.h"
 #include "omap_device.h"
 #include <plat/counter-32k.h>
-#include <plat/dmtimer.h>
+#include <plat-omap/dmtimer.h>
 #include "omap-pm.h"
 
 #include "soc.h"
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 89585c2..a1d45c7 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -46,7 +46,7 @@
 #include <linux/platform_device.h>
 #include <linux/platform_data/dmtimer-omap.h>
 
-#include <plat/dmtimer.h>
+#include <plat-omap/dmtimer.h>
 
 static u32 omap_reserved_systimers;
 static LIST_HEAD(omap_timer_list);
diff --git a/arch/arm/plat-omap/include/plat-omap/dmtimer.h b/arch/arm/plat-omap/include/plat-omap/dmtimer.h
new file mode 100644
index 0000000..abe073f
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat-omap/dmtimer.h
@@ -0,0 +1,420 @@
+/*
+ * arch/arm/plat-omap/include/plat-omap/dmtimer.h
+ *
+ * OMAP Dual-Mode Timers
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Tarun Kanti DebBarma <tarun.kanti@ti.com>
+ * Thara Gopinath <thara@ti.com>
+ *
+ * Platform device conversion and hwmod support.
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
+ * PWM and clock framwork support by Timo Teras.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#ifndef __ASM_ARCH_DMTIMER_H
+#define __ASM_ARCH_DMTIMER_H
+
+/* clock sources */
+#define OMAP_TIMER_SRC_SYS_CLK			0x00
+#define OMAP_TIMER_SRC_32_KHZ			0x01
+#define OMAP_TIMER_SRC_EXT_CLK			0x02
+
+/* timer interrupt enable bits */
+#define OMAP_TIMER_INT_CAPTURE			(1 << 2)
+#define OMAP_TIMER_INT_OVERFLOW			(1 << 1)
+#define OMAP_TIMER_INT_MATCH			(1 << 0)
+
+/* trigger types */
+#define OMAP_TIMER_TRIGGER_NONE			0x00
+#define OMAP_TIMER_TRIGGER_OVERFLOW		0x01
+#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE	0x02
+
+/* posted mode types */
+#define OMAP_TIMER_NONPOSTED			0x00
+#define OMAP_TIMER_POSTED			0x01
+
+/* timer capabilities used in hwmod database */
+#define OMAP_TIMER_SECURE				0x80000000
+#define OMAP_TIMER_ALWON				0x40000000
+#define OMAP_TIMER_HAS_PWM				0x20000000
+#define OMAP_TIMER_NEEDS_RESET				0x10000000
+#define OMAP_TIMER_HAS_DSP_IRQ				0x08000000
+
+/*
+ * timer errata flags
+ *
+ * Errata i103/i767 impacts all OMAP3/4/5 devices including AM33xx. This
+ * errata prevents us from using posted mode on these devices, unless the
+ * timer counter register is never read. For more details please refer to
+ * the OMAP3/4/5 errata documents.
+ */
+#define OMAP_TIMER_ERRATA_I103_I767			0x80000000
+
+struct omap_timer_capability_dev_attr {
+	u32 timer_capability;
+};
+
+struct timer_regs {
+	u32 tidr;
+	u32 tier;
+	u32 twer;
+	u32 tclr;
+	u32 tcrr;
+	u32 tldr;
+	u32 ttrg;
+	u32 twps;
+	u32 tmar;
+	u32 tcar1;
+	u32 tsicr;
+	u32 tcar2;
+	u32 tpir;
+	u32 tnir;
+	u32 tcvr;
+	u32 tocr;
+	u32 towr;
+};
+
+struct omap_dm_timer {
+	int id;
+	int irq;
+	struct clk *fclk;
+
+	void __iomem	*io_base;
+	void __iomem	*irq_stat;	/* TISR/IRQSTATUS interrupt status */
+	void __iomem	*irq_ena;	/* irq enable */
+	void __iomem	*irq_dis;	/* irq disable, only on v2 ip */
+	void __iomem	*pend;		/* write pending */
+	void __iomem	*func_base;	/* function register base */
+
+	unsigned long rate;
+	unsigned reserved:1;
+	unsigned posted:1;
+	struct timer_regs context;
+	int (*get_context_loss_count)(struct device *);
+	int ctx_loss_count;
+	int revision;
+	u32 capability;
+	u32 errata;
+	struct platform_device *pdev;
+	struct list_head node;
+};
+
+int omap_dm_timer_reserve_systimer(int id);
+struct omap_dm_timer *omap_dm_timer_request(void);
+struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
+struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap);
+int omap_dm_timer_free(struct omap_dm_timer *timer);
+void omap_dm_timer_enable(struct omap_dm_timer *timer);
+void omap_dm_timer_disable(struct omap_dm_timer *timer);
+
+int omap_dm_timer_get_irq(struct omap_dm_timer *timer);
+
+u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
+struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer);
+
+int omap_dm_timer_trigger(struct omap_dm_timer *timer);
+int omap_dm_timer_start(struct omap_dm_timer *timer);
+int omap_dm_timer_stop(struct omap_dm_timer *timer);
+
+int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
+int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
+			   unsigned int value);
+int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
+				 unsigned int value);
+int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
+			    unsigned int match);
+int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle,
+			  int trigger);
+int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
+
+int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
+				 unsigned int value);
+int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask);
+
+unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer);
+int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
+unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer);
+int omap_dm_timer_write_counter(struct omap_dm_timer *timer,
+				unsigned int value);
+
+int omap_dm_timers_active(void);
+
+/*
+ * Do not use the defines below, they are not needed. They should be only
+ * used by dmtimer.c and sys_timer related code.
+ */
+
+/*
+ * The interrupt registers are different between v1 and v2 ip.
+ * These registers are offsets from timer->iobase.
+ */
+#define OMAP_TIMER_ID_OFFSET		0x00
+#define OMAP_TIMER_OCP_CFG_OFFSET	0x10
+
+#define OMAP_TIMER_V1_SYS_STAT_OFFSET	0x14
+#define OMAP_TIMER_V1_STAT_OFFSET	0x18
+#define OMAP_TIMER_V1_INT_EN_OFFSET	0x1c
+
+#define OMAP_TIMER_V2_IRQSTATUS_RAW	0x24
+#define OMAP_TIMER_V2_IRQSTATUS		0x28
+#define OMAP_TIMER_V2_IRQENABLE_SET	0x2c
+#define OMAP_TIMER_V2_IRQENABLE_CLR	0x30
+
+/*
+ * The functional registers have a different base on v1 and v2 ip.
+ * These registers are offsets from timer->func_base. The func_base
+ * is samae as io_base for v1 and io_base + 0x14 for v2 ip.
+ *
+ */
+#define OMAP_TIMER_V2_FUNC_OFFSET		0x14
+
+#define _OMAP_TIMER_WAKEUP_EN_OFFSET	0x20
+#define _OMAP_TIMER_CTRL_OFFSET		0x24
+#define		OMAP_TIMER_CTRL_GPOCFG		(1 << 14)
+#define		OMAP_TIMER_CTRL_CAPTMODE	(1 << 13)
+#define		OMAP_TIMER_CTRL_PT		(1 << 12)
+#define		OMAP_TIMER_CTRL_TCM_LOWTOHIGH	(0x1 << 8)
+#define		OMAP_TIMER_CTRL_TCM_HIGHTOLOW	(0x2 << 8)
+#define		OMAP_TIMER_CTRL_TCM_BOTHEDGES	(0x3 << 8)
+#define		OMAP_TIMER_CTRL_SCPWM		(1 << 7)
+#define		OMAP_TIMER_CTRL_CE		(1 << 6) /* compare enable */
+#define		OMAP_TIMER_CTRL_PRE		(1 << 5) /* prescaler enable */
+#define		OMAP_TIMER_CTRL_PTV_SHIFT	2 /* prescaler value shift */
+#define		OMAP_TIMER_CTRL_POSTED		(1 << 2)
+#define		OMAP_TIMER_CTRL_AR		(1 << 1) /* autoreload enable */
+#define		OMAP_TIMER_CTRL_ST		(1 << 0) /* start timer */
+#define _OMAP_TIMER_COUNTER_OFFSET	0x28
+#define _OMAP_TIMER_LOAD_OFFSET		0x2c
+#define _OMAP_TIMER_TRIGGER_OFFSET	0x30
+#define _OMAP_TIMER_WRITE_PEND_OFFSET	0x34
+#define		WP_NONE			0	/* no write pending bit */
+#define		WP_TCLR			(1 << 0)
+#define		WP_TCRR			(1 << 1)
+#define		WP_TLDR			(1 << 2)
+#define		WP_TTGR			(1 << 3)
+#define		WP_TMAR			(1 << 4)
+#define		WP_TPIR			(1 << 5)
+#define		WP_TNIR			(1 << 6)
+#define		WP_TCVR			(1 << 7)
+#define		WP_TOCR			(1 << 8)
+#define		WP_TOWR			(1 << 9)
+#define _OMAP_TIMER_MATCH_OFFSET	0x38
+#define _OMAP_TIMER_CAPTURE_OFFSET	0x3c
+#define _OMAP_TIMER_IF_CTRL_OFFSET	0x40
+#define _OMAP_TIMER_CAPTURE2_OFFSET		0x44	/* TCAR2, 34xx only */
+#define _OMAP_TIMER_TICK_POS_OFFSET		0x48	/* TPIR, 34xx only */
+#define _OMAP_TIMER_TICK_NEG_OFFSET		0x4c	/* TNIR, 34xx only */
+#define _OMAP_TIMER_TICK_COUNT_OFFSET		0x50	/* TCVR, 34xx only */
+#define _OMAP_TIMER_TICK_INT_MASK_SET_OFFSET	0x54	/* TOCR, 34xx only */
+#define _OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET	0x58	/* TOWR, 34xx only */
+
+/* register offsets with the write pending bit encoded */
+#define	WPSHIFT					16
+
+#define OMAP_TIMER_WAKEUP_EN_REG		(_OMAP_TIMER_WAKEUP_EN_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_CTRL_REG			(_OMAP_TIMER_CTRL_OFFSET \
+							| (WP_TCLR << WPSHIFT))
+
+#define OMAP_TIMER_COUNTER_REG			(_OMAP_TIMER_COUNTER_OFFSET \
+							| (WP_TCRR << WPSHIFT))
+
+#define OMAP_TIMER_LOAD_REG			(_OMAP_TIMER_LOAD_OFFSET \
+							| (WP_TLDR << WPSHIFT))
+
+#define OMAP_TIMER_TRIGGER_REG			(_OMAP_TIMER_TRIGGER_OFFSET \
+							| (WP_TTGR << WPSHIFT))
+
+#define OMAP_TIMER_WRITE_PEND_REG		(_OMAP_TIMER_WRITE_PEND_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_MATCH_REG			(_OMAP_TIMER_MATCH_OFFSET \
+							| (WP_TMAR << WPSHIFT))
+
+#define OMAP_TIMER_CAPTURE_REG			(_OMAP_TIMER_CAPTURE_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_IF_CTRL_REG			(_OMAP_TIMER_IF_CTRL_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_CAPTURE2_REG			(_OMAP_TIMER_CAPTURE2_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_TICK_POS_REG			(_OMAP_TIMER_TICK_POS_OFFSET \
+							| (WP_TPIR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_NEG_REG			(_OMAP_TIMER_TICK_NEG_OFFSET \
+							| (WP_TNIR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_COUNT_REG		(_OMAP_TIMER_TICK_COUNT_OFFSET \
+							| (WP_TCVR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_INT_MASK_SET_REG				\
+		(_OMAP_TIMER_TICK_INT_MASK_SET_OFFSET | (WP_TOCR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_INT_MASK_COUNT_REG				\
+		(_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT))
+
+static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
+						int posted)
+{
+	if (posted)
+		while (__raw_readl(timer->pend) & (reg >> WPSHIFT))
+			cpu_relax();
+
+	return __raw_readl(timer->func_base + (reg & 0xff));
+}
+
+static inline void __omap_dm_timer_write(struct omap_dm_timer *timer,
+					u32 reg, u32 val, int posted)
+{
+	if (posted)
+		while (__raw_readl(timer->pend) & (reg >> WPSHIFT))
+			cpu_relax();
+
+	__raw_writel(val, timer->func_base + (reg & 0xff));
+}
+
+static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
+{
+	u32 tidr;
+
+	/* Assume v1 ip if bits [31:16] are zero */
+	tidr = __raw_readl(timer->io_base);
+	if (!(tidr >> 16)) {
+		timer->revision = 1;
+		timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
+		timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
+		timer->irq_dis = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
+		timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
+		timer->func_base = timer->io_base;
+	} else {
+		timer->revision = 2;
+		timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
+		timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
+		timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;
+		timer->pend = timer->io_base +
+			_OMAP_TIMER_WRITE_PEND_OFFSET +
+				OMAP_TIMER_V2_FUNC_OFFSET;
+		timer->func_base = timer->io_base + OMAP_TIMER_V2_FUNC_OFFSET;
+	}
+}
+
+/*
+ * __omap_dm_timer_enable_posted - enables write posted mode
+ * @timer:      pointer to timer instance handle
+ *
+ * Enables the write posted mode for the timer. When posted mode is enabled
+ * writes to certain timer registers are immediately acknowledged by the
+ * internal bus and hence prevents stalling the CPU waiting for the write to
+ * complete. Enabling this feature can improve performance for writing to the
+ * timer registers.
+ */
+static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer)
+{
+	if (timer->posted)
+		return;
+
+	if (timer->errata & OMAP_TIMER_ERRATA_I103_I767)
+		return;
+
+	__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
+			      OMAP_TIMER_CTRL_POSTED, 0);
+	timer->context.tsicr = OMAP_TIMER_CTRL_POSTED;
+	timer->posted = OMAP_TIMER_POSTED;
+}
+
+/**
+ * __omap_dm_timer_override_errata - override errata flags for a timer
+ * @timer:      pointer to timer handle
+ * @errata:	errata flags to be ignored
+ *
+ * For a given timer, override a timer errata by clearing the flags
+ * specified by the errata argument. A specific erratum should only be
+ * overridden for a timer if the timer is used in such a way the erratum
+ * has no impact.
+ */
+static inline void __omap_dm_timer_override_errata(struct omap_dm_timer *timer,
+						   u32 errata)
+{
+	timer->errata &= ~errata;
+}
+
+static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer,
+					int posted, unsigned long rate)
+{
+	u32 l;
+
+	l = __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
+	if (l & OMAP_TIMER_CTRL_ST) {
+		l &= ~0x1;
+		__omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, l, posted);
+#ifdef CONFIG_ARCH_OMAP2PLUS
+		/* Readback to make sure write has completed */
+		__omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
+		/*
+		 * Wait for functional clock period x 3.5 to make sure that
+		 * timer is stopped
+		 */
+		udelay(3500000 / rate + 1);
+#endif
+	}
+
+	/* Ack possibly pending interrupt */
+	__raw_writel(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat);
+}
+
+static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer,
+						u32 ctrl, unsigned int load,
+						int posted)
+{
+	__omap_dm_timer_write(timer, OMAP_TIMER_COUNTER_REG, load, posted);
+	__omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, ctrl, posted);
+}
+
+static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer,
+						unsigned int value)
+{
+	__raw_writel(value, timer->irq_ena);
+	__omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
+}
+
+static inline unsigned int
+__omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted)
+{
+	return __omap_dm_timer_read(timer, OMAP_TIMER_COUNTER_REG, posted);
+}
+
+static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer,
+						unsigned int value)
+{
+	__raw_writel(value, timer->irq_stat);
+}
+
+#endif /* __ASM_ARCH_DMTIMER_H */
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
deleted file mode 100644
index a3fbc48..0000000
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ /dev/null
@@ -1,414 +0,0 @@
-/*
- * arch/arm/plat-omap/include/plat/dmtimer.h
- *
- * OMAP Dual-Mode Timers
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- * Tarun Kanti DebBarma <tarun.kanti@ti.com>
- * Thara Gopinath <thara@ti.com>
- *
- * Platform device conversion and hwmod support.
- *
- * Copyright (C) 2005 Nokia Corporation
- * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
- * PWM and clock framwork support by Timo Teras.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-
-#ifndef __ASM_ARCH_DMTIMER_H
-#define __ASM_ARCH_DMTIMER_H
-
-/* clock sources */
-#define OMAP_TIMER_SRC_SYS_CLK			0x00
-#define OMAP_TIMER_SRC_32_KHZ			0x01
-#define OMAP_TIMER_SRC_EXT_CLK			0x02
-
-/* timer interrupt enable bits */
-#define OMAP_TIMER_INT_CAPTURE			(1 << 2)
-#define OMAP_TIMER_INT_OVERFLOW			(1 << 1)
-#define OMAP_TIMER_INT_MATCH			(1 << 0)
-
-/* trigger types */
-#define OMAP_TIMER_TRIGGER_NONE			0x00
-#define OMAP_TIMER_TRIGGER_OVERFLOW		0x01
-#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE	0x02
-
-/* posted mode types */
-#define OMAP_TIMER_NONPOSTED			0x00
-#define OMAP_TIMER_POSTED			0x01
-
-/* timer capabilities used in hwmod database */
-#define OMAP_TIMER_SECURE				0x80000000
-#define OMAP_TIMER_ALWON				0x40000000
-#define OMAP_TIMER_HAS_PWM				0x20000000
-#define OMAP_TIMER_NEEDS_RESET				0x10000000
-#define OMAP_TIMER_HAS_DSP_IRQ				0x08000000
-
-/*
- * timer errata flags
- *
- * Errata i103/i767 impacts all OMAP3/4/5 devices including AM33xx. This
- * errata prevents us from using posted mode on these devices, unless the
- * timer counter register is never read. For more details please refer to
- * the OMAP3/4/5 errata documents.
- */
-#define OMAP_TIMER_ERRATA_I103_I767			0x80000000
-
-struct omap_timer_capability_dev_attr {
-	u32 timer_capability;
-};
-
-struct timer_regs {
-	u32 tidr;
-	u32 tier;
-	u32 twer;
-	u32 tclr;
-	u32 tcrr;
-	u32 tldr;
-	u32 ttrg;
-	u32 twps;
-	u32 tmar;
-	u32 tcar1;
-	u32 tsicr;
-	u32 tcar2;
-	u32 tpir;
-	u32 tnir;
-	u32 tcvr;
-	u32 tocr;
-	u32 towr;
-};
-
-struct omap_dm_timer {
-	int id;
-	int irq;
-	struct clk *fclk;
-
-	void __iomem	*io_base;
-	void __iomem	*irq_stat;	/* TISR/IRQSTATUS interrupt status */
-	void __iomem	*irq_ena;	/* irq enable */
-	void __iomem	*irq_dis;	/* irq disable, only on v2 ip */
-	void __iomem	*pend;		/* write pending */
-	void __iomem	*func_base;	/* function register base */
-
-	unsigned long rate;
-	unsigned reserved:1;
-	unsigned posted:1;
-	struct timer_regs context;
-	int (*get_context_loss_count)(struct device *);
-	int ctx_loss_count;
-	int revision;
-	u32 capability;
-	u32 errata;
-	struct platform_device *pdev;
-	struct list_head node;
-};
-
-int omap_dm_timer_reserve_systimer(int id);
-struct omap_dm_timer *omap_dm_timer_request(void);
-struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
-struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap);
-int omap_dm_timer_free(struct omap_dm_timer *timer);
-void omap_dm_timer_enable(struct omap_dm_timer *timer);
-void omap_dm_timer_disable(struct omap_dm_timer *timer);
-
-int omap_dm_timer_get_irq(struct omap_dm_timer *timer);
-
-u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
-struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer);
-
-int omap_dm_timer_trigger(struct omap_dm_timer *timer);
-int omap_dm_timer_start(struct omap_dm_timer *timer);
-int omap_dm_timer_stop(struct omap_dm_timer *timer);
-
-int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
-int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
-int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
-int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
-int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger);
-int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
-
-int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
-int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask);
-
-unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer);
-int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
-unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer);
-int omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value);
-
-int omap_dm_timers_active(void);
-
-/*
- * Do not use the defines below, they are not needed. They should be only
- * used by dmtimer.c and sys_timer related code.
- */
-
-/*
- * The interrupt registers are different between v1 and v2 ip.
- * These registers are offsets from timer->iobase.
- */
-#define OMAP_TIMER_ID_OFFSET		0x00
-#define OMAP_TIMER_OCP_CFG_OFFSET	0x10
-
-#define OMAP_TIMER_V1_SYS_STAT_OFFSET	0x14
-#define OMAP_TIMER_V1_STAT_OFFSET	0x18
-#define OMAP_TIMER_V1_INT_EN_OFFSET	0x1c
-
-#define OMAP_TIMER_V2_IRQSTATUS_RAW	0x24
-#define OMAP_TIMER_V2_IRQSTATUS		0x28
-#define OMAP_TIMER_V2_IRQENABLE_SET	0x2c
-#define OMAP_TIMER_V2_IRQENABLE_CLR	0x30
-
-/*
- * The functional registers have a different base on v1 and v2 ip.
- * These registers are offsets from timer->func_base. The func_base
- * is samae as io_base for v1 and io_base + 0x14 for v2 ip.
- *
- */
-#define OMAP_TIMER_V2_FUNC_OFFSET		0x14
-
-#define _OMAP_TIMER_WAKEUP_EN_OFFSET	0x20
-#define _OMAP_TIMER_CTRL_OFFSET		0x24
-#define		OMAP_TIMER_CTRL_GPOCFG		(1 << 14)
-#define		OMAP_TIMER_CTRL_CAPTMODE	(1 << 13)
-#define		OMAP_TIMER_CTRL_PT		(1 << 12)
-#define		OMAP_TIMER_CTRL_TCM_LOWTOHIGH	(0x1 << 8)
-#define		OMAP_TIMER_CTRL_TCM_HIGHTOLOW	(0x2 << 8)
-#define		OMAP_TIMER_CTRL_TCM_BOTHEDGES	(0x3 << 8)
-#define		OMAP_TIMER_CTRL_SCPWM		(1 << 7)
-#define		OMAP_TIMER_CTRL_CE		(1 << 6) /* compare enable */
-#define		OMAP_TIMER_CTRL_PRE		(1 << 5) /* prescaler enable */
-#define		OMAP_TIMER_CTRL_PTV_SHIFT	2 /* prescaler value shift */
-#define		OMAP_TIMER_CTRL_POSTED		(1 << 2)
-#define		OMAP_TIMER_CTRL_AR		(1 << 1) /* auto-reload enable */
-#define		OMAP_TIMER_CTRL_ST		(1 << 0) /* start timer */
-#define _OMAP_TIMER_COUNTER_OFFSET	0x28
-#define _OMAP_TIMER_LOAD_OFFSET		0x2c
-#define _OMAP_TIMER_TRIGGER_OFFSET	0x30
-#define _OMAP_TIMER_WRITE_PEND_OFFSET	0x34
-#define		WP_NONE			0	/* no write pending bit */
-#define		WP_TCLR			(1 << 0)
-#define		WP_TCRR			(1 << 1)
-#define		WP_TLDR			(1 << 2)
-#define		WP_TTGR			(1 << 3)
-#define		WP_TMAR			(1 << 4)
-#define		WP_TPIR			(1 << 5)
-#define		WP_TNIR			(1 << 6)
-#define		WP_TCVR			(1 << 7)
-#define		WP_TOCR			(1 << 8)
-#define		WP_TOWR			(1 << 9)
-#define _OMAP_TIMER_MATCH_OFFSET	0x38
-#define _OMAP_TIMER_CAPTURE_OFFSET	0x3c
-#define _OMAP_TIMER_IF_CTRL_OFFSET	0x40
-#define _OMAP_TIMER_CAPTURE2_OFFSET		0x44	/* TCAR2, 34xx only */
-#define _OMAP_TIMER_TICK_POS_OFFSET		0x48	/* TPIR, 34xx only */
-#define _OMAP_TIMER_TICK_NEG_OFFSET		0x4c	/* TNIR, 34xx only */
-#define _OMAP_TIMER_TICK_COUNT_OFFSET		0x50	/* TCVR, 34xx only */
-#define _OMAP_TIMER_TICK_INT_MASK_SET_OFFSET	0x54	/* TOCR, 34xx only */
-#define _OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET	0x58	/* TOWR, 34xx only */
-
-/* register offsets with the write pending bit encoded */
-#define	WPSHIFT					16
-
-#define OMAP_TIMER_WAKEUP_EN_REG		(_OMAP_TIMER_WAKEUP_EN_OFFSET \
-							| (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_CTRL_REG			(_OMAP_TIMER_CTRL_OFFSET \
-							| (WP_TCLR << WPSHIFT))
-
-#define OMAP_TIMER_COUNTER_REG			(_OMAP_TIMER_COUNTER_OFFSET \
-							| (WP_TCRR << WPSHIFT))
-
-#define OMAP_TIMER_LOAD_REG			(_OMAP_TIMER_LOAD_OFFSET \
-							| (WP_TLDR << WPSHIFT))
-
-#define OMAP_TIMER_TRIGGER_REG			(_OMAP_TIMER_TRIGGER_OFFSET \
-							| (WP_TTGR << WPSHIFT))
-
-#define OMAP_TIMER_WRITE_PEND_REG		(_OMAP_TIMER_WRITE_PEND_OFFSET \
-							| (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_MATCH_REG			(_OMAP_TIMER_MATCH_OFFSET \
-							| (WP_TMAR << WPSHIFT))
-
-#define OMAP_TIMER_CAPTURE_REG			(_OMAP_TIMER_CAPTURE_OFFSET \
-							| (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_IF_CTRL_REG			(_OMAP_TIMER_IF_CTRL_OFFSET \
-							| (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_CAPTURE2_REG			(_OMAP_TIMER_CAPTURE2_OFFSET \
-							| (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_TICK_POS_REG			(_OMAP_TIMER_TICK_POS_OFFSET \
-							| (WP_TPIR << WPSHIFT))
-
-#define OMAP_TIMER_TICK_NEG_REG			(_OMAP_TIMER_TICK_NEG_OFFSET \
-							| (WP_TNIR << WPSHIFT))
-
-#define OMAP_TIMER_TICK_COUNT_REG		(_OMAP_TIMER_TICK_COUNT_OFFSET \
-							| (WP_TCVR << WPSHIFT))
-
-#define OMAP_TIMER_TICK_INT_MASK_SET_REG				\
-		(_OMAP_TIMER_TICK_INT_MASK_SET_OFFSET | (WP_TOCR << WPSHIFT))
-
-#define OMAP_TIMER_TICK_INT_MASK_COUNT_REG				\
-		(_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT))
-
-static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
-						int posted)
-{
-	if (posted)
-		while (__raw_readl(timer->pend) & (reg >> WPSHIFT))
-			cpu_relax();
-
-	return __raw_readl(timer->func_base + (reg & 0xff));
-}
-
-static inline void __omap_dm_timer_write(struct omap_dm_timer *timer,
-					u32 reg, u32 val, int posted)
-{
-	if (posted)
-		while (__raw_readl(timer->pend) & (reg >> WPSHIFT))
-			cpu_relax();
-
-	__raw_writel(val, timer->func_base + (reg & 0xff));
-}
-
-static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
-{
-	u32 tidr;
-
-	/* Assume v1 ip if bits [31:16] are zero */
-	tidr = __raw_readl(timer->io_base);
-	if (!(tidr >> 16)) {
-		timer->revision = 1;
-		timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
-		timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
-		timer->irq_dis = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
-		timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
-		timer->func_base = timer->io_base;
-	} else {
-		timer->revision = 2;
-		timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
-		timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
-		timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;
-		timer->pend = timer->io_base +
-			_OMAP_TIMER_WRITE_PEND_OFFSET +
-				OMAP_TIMER_V2_FUNC_OFFSET;
-		timer->func_base = timer->io_base + OMAP_TIMER_V2_FUNC_OFFSET;
-	}
-}
-
-/*
- * __omap_dm_timer_enable_posted - enables write posted mode
- * @timer:      pointer to timer instance handle
- *
- * Enables the write posted mode for the timer. When posted mode is enabled
- * writes to certain timer registers are immediately acknowledged by the
- * internal bus and hence prevents stalling the CPU waiting for the write to
- * complete. Enabling this feature can improve performance for writing to the
- * timer registers.
- */
-static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer)
-{
-	if (timer->posted)
-		return;
-
-	if (timer->errata & OMAP_TIMER_ERRATA_I103_I767)
-		return;
-
-	__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
-			      OMAP_TIMER_CTRL_POSTED, 0);
-	timer->context.tsicr = OMAP_TIMER_CTRL_POSTED;
-	timer->posted = OMAP_TIMER_POSTED;
-}
-
-/**
- * __omap_dm_timer_override_errata - override errata flags for a timer
- * @timer:      pointer to timer handle
- * @errata:	errata flags to be ignored
- *
- * For a given timer, override a timer errata by clearing the flags
- * specified by the errata argument. A specific erratum should only be
- * overridden for a timer if the timer is used in such a way the erratum
- * has no impact.
- */
-static inline void __omap_dm_timer_override_errata(struct omap_dm_timer *timer,
-						   u32 errata)
-{
-	timer->errata &= ~errata;
-}
-
-static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer,
-					int posted, unsigned long rate)
-{
-	u32 l;
-
-	l = __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
-	if (l & OMAP_TIMER_CTRL_ST) {
-		l &= ~0x1;
-		__omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, l, posted);
-#ifdef CONFIG_ARCH_OMAP2PLUS
-		/* Readback to make sure write has completed */
-		__omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
-		/*
-		 * Wait for functional clock period x 3.5 to make sure that
-		 * timer is stopped
-		 */
-		udelay(3500000 / rate + 1);
-#endif
-	}
-
-	/* Ack possibly pending interrupt */
-	__raw_writel(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat);
-}
-
-static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer,
-						u32 ctrl, unsigned int load,
-						int posted)
-{
-	__omap_dm_timer_write(timer, OMAP_TIMER_COUNTER_REG, load, posted);
-	__omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, ctrl, posted);
-}
-
-static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer,
-						unsigned int value)
-{
-	__raw_writel(value, timer->irq_ena);
-	__omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
-}
-
-static inline unsigned int
-__omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted)
-{
-	return __omap_dm_timer_read(timer, OMAP_TIMER_COUNTER_REG, posted);
-}
-
-static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer,
-						unsigned int value)
-{
-	__raw_writel(value, timer->irq_stat);
-}
-
-#endif /* __ASM_ARCH_DMTIMER_H */
diff --git a/drivers/staging/tidspbridge/core/dsp-clock.c b/drivers/staging/tidspbridge/core/dsp-clock.c
index b647207..6bb0300 100644
--- a/drivers/staging/tidspbridge/core/dsp-clock.c
+++ b/drivers/staging/tidspbridge/core/dsp-clock.c
@@ -22,7 +22,7 @@
 
 /*  ----------------------------------- Host OS */
 #include <dspbridge/host_os.h>
-#include <plat/dmtimer.h>
+#include <plat-omap/dmtimer.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
 
 /*  ----------------------------------- DSP/BIOS Bridge */
-- 
1.7.9.5

[PATCH 8/8] ARM: OMAP: Move plat/dmtimer.h to plat-omap/dmtimer.h

[Tony Lindgren]

* Jon Hunter <jon-hunter@ti.com> [121113 10:15]:
> Move plat/dmtimer.h to plat-omap/dmtimer.h in order to support a single
> zImage for ARM devices.

Let's skip this one for now as it turns out this solution won't
work either for multiplatform without adding nasty hacks to
arch/arm/Makefile to include arch/arm/plat-omap.

Sorry I don't have any real solution in mind other than making
the remaining dmtimer.h users to use Linux generic timer functions,
or pass the dmtimer functions in platform_data for now.

Regards,

Tony

[PATCH 8/8] ARM: OMAP: Move plat/dmtimer.h to plat-omap/dmtimer.h

[Jon Hunter]

On 11/13/2012 04:26 PM, Tony Lindgren wrote:
> * Jon Hunter <jon-hunter@ti.com> [121113 10:15]:
>> Move plat/dmtimer.h to plat-omap/dmtimer.h in order to support a single
>> zImage for ARM devices.
> 
> Let's skip this one for now as it turns out this solution won't
> work either for multiplatform without adding nasty hacks to
> arch/arm/Makefile to include arch/arm/plat-omap.
> 
> Sorry I don't have any real solution in mind other than making
> the remaining dmtimer.h users to use Linux generic timer functions,
> or pass the dmtimer functions in platform_data for now.

Ok, no problem. Are you happy with the others?

One thing that we could do, is not include the dmtimer driver in the
multi-platform build for now. I believe that only the dsp/iva/gfx is
using this driver currently.

I believe that there are some issues with building the kernel without
the dmtimer and so I can look into fixing that.

Is there a way to not include dmtimer with multi-platform but still
enable in omap2plus_defconfig? Or are we planning to kill
omap2plus_defconfig too?

Cheers
Jon

[PATCH 8/8] ARM: OMAP: Move plat/dmtimer.h to plat-omap/dmtimer.h

[Tony Lindgren]

* Jon Hunter <jon-hunter@ti.com> [121113 14:56]:
> 
> On 11/13/2012 04:26 PM, Tony Lindgren wrote:
> > * Jon Hunter <jon-hunter@ti.com> [121113 10:15]:
> >> Move plat/dmtimer.h to plat-omap/dmtimer.h in order to support a single
> >> zImage for ARM devices.
> > 
> > Let's skip this one for now as it turns out this solution won't
> > work either for multiplatform without adding nasty hacks to
> > arch/arm/Makefile to include arch/arm/plat-omap.
> > 
> > Sorry I don't have any real solution in mind other than making
> > the remaining dmtimer.h users to use Linux generic timer functions,
> > or pass the dmtimer functions in platform_data for now.
> 
> Ok, no problem. Are you happy with the others?

The others look OK to me thanks.
 
> One thing that we could do, is not include the dmtimer driver in the
> multi-platform build for now. I believe that only the dsp/iva/gfx is
> using this driver currently.

Looks like the users are drivers/staging/tidspbridge and
drivers/media/rc/ir-rx51.c. Both could use platform_data pointers
for now, but that really just postpones the problem.
 
> I believe that there are some issues with building the kernel without
> the dmtimer and so I can look into fixing that.

We can include it from <plat/dmtimer.h> for arch/arm/*omap*/*
code, but not for drivers.
 
> Is there a way to not include dmtimer with multi-platform but still
> enable in omap2plus_defconfig? Or are we planning to kill
> omap2plus_defconfig too?

We'll be keeping omap2plus_defconfig, but once we enable multiplatform
support there's really no reason to go back.

Regards,

Tony