linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: mgr@pengutronix.de (Michael Grzeschik)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/9] usb: chipidea: add PTW and PTS handling
Date: Fri, 16 Nov 2012 14:16:28 +0100	[thread overview]
Message-ID: <20121116131628.GA21447@pengutronix.de> (raw)
In-Reply-To: <87zk2h67ik.fsf@ashishki-desk.ger.corp.intel.com>

On Fri, Nov 16, 2012 at 02:45:39PM +0200, Alexander Shishkin wrote:
> Michael Grzeschik <m.grzeschik@pengutronix.de> writes:
> 
> > This patch makes it possible to configure the PTW and PTS bits inside
> > the portsc register for host and device mode before the driver starts
> > and the phy can be addressed as hardware implementation is designed.
> >
> > Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> > Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
> > ---
> >  drivers/usb/chipidea/bits.h        |    3 +++
> >  drivers/usb/chipidea/ci.h          |    2 ++
> >  drivers/usb/chipidea/ci13xxx_imx.c |    1 +
> >  drivers/usb/chipidea/core.c        |   47 ++++++++++++++++++++++++++++++++++++
> >  drivers/usb/chipidea/host.c        |    4 +++
> >  include/linux/usb/chipidea.h       |    9 +++++++
> >  6 files changed, 66 insertions(+)
> >
> > diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h
> > index 4b6ae3e..3cded5f 100644
> > --- a/drivers/usb/chipidea/bits.h
> > +++ b/drivers/usb/chipidea/bits.h
> > @@ -48,6 +48,9 @@
> >  #define PORTSC_SUSP           BIT(7)
> >  #define PORTSC_HSP            BIT(9)
> >  #define PORTSC_PTC            (0x0FUL << 16)
> > +#define PORTSC_PTS            (BIT(31) | BIT(30))
> > +#define PORTSC_PTW            BIT(28)
> > +#define PORTSC_STS            BIT(29)
> 
> Hm, my spec says these are actually in DEVLC register and only have this
> meaning in device mode. And in portsc these bits fall in device address
> bitfield. Can you refer me to your spec?

You can find it here:
http://cache.freescale.com/files/32bit/doc/ref_manual/iMX53RM.pdf?fpsp=1
Page 4947

We as well do have the original documentation from Synopsys in which there
there is an DEVLC register in the index, but nowhere else in the Datasheet.

June 2011 - Doc.Rev. 2.40a
USB 2.0 High Speed Atlantic Controller

Unfortunately, its not possible for me to share this document.

Thanks,
Michael
-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

  reply	other threads:[~2012-11-16 13:16 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-14 16:19 [PATCH 0/9] chipidea fixes and features Michael Grzeschik
2012-11-14 16:19 ` [PATCH 1/9] usb: chipidea: pci: mark platformdata as static and __devinitdata Michael Grzeschik
2012-11-16 10:06   ` Alexander Shishkin
2012-11-16 10:17     ` Marc Kleine-Budde
2012-11-16 11:41       ` Alexander Shishkin
2012-11-16 12:02     ` Greg KH
2012-11-14 16:19 ` [PATCH 2/9] usb: chipidea: ci13xxx_imx: add 2nd and 3rd clock to support imx5x and newer Michael Grzeschik
2012-11-26  9:29   ` Peter Chen
2012-11-26 10:22     ` Sascha Hauer
2012-11-27  6:50       ` Peter Chen
2012-11-27  7:34         ` Sascha Hauer
2012-11-14 16:19 ` [PATCH 3/9] usb: chipidea: ci13xxx-imx: create dynamic platformdata Michael Grzeschik
2012-11-16 10:14   ` Alexander Shishkin
2012-11-16 10:19     ` Marc Kleine-Budde
2012-11-16 12:06   ` Alexander Shishkin
2012-11-14 16:19 ` [PATCH 4/9] usb: chipidea: ci13xxx-imx: add "dr_mode" property to device tree bindings Michael Grzeschik
2012-11-16 11:53   ` Alexander Shishkin
2012-11-16 11:55     ` Marc Kleine-Budde
2012-11-26  9:46     ` Peter Chen
2012-11-29 12:54       ` Alexander Shishkin
2012-11-14 16:19 ` [PATCH 5/9] usb: add phy connection by phy-mode Michael Grzeschik
2012-11-16  9:25   ` Alexander Shishkin
2012-11-16 11:28   ` Felipe Balbi
2012-11-16 11:31   ` Felipe Balbi
2012-11-16 11:44     ` Marc Kleine-Budde
2012-11-16 13:41       ` Felipe Balbi
2012-11-16 14:32         ` Marc Kleine-Budde
2012-11-26  9:56   ` Peter Chen
2012-11-14 16:19 ` [PATCH 6/9] usb: chipidea: add PTW and PTS handling Michael Grzeschik
2012-11-16 12:18   ` Alexander Shishkin
2012-11-16 12:45   ` Alexander Shishkin
2012-11-16 13:16     ` Michael Grzeschik [this message]
2012-11-16 13:34       ` Alexander Shishkin
2012-11-16 13:57         ` Michael Grzeschik
2012-11-16 14:06           ` Alexander Shishkin
2012-11-16 14:46             ` Matthieu CASTET
2012-11-16 15:39               ` Alexander Shishkin
2012-11-21 15:57                 ` Michael Grzeschik
2012-11-21 16:06                   ` Matthieu CASTET
2012-11-27  1:12   ` Peter Chen
2012-11-27  9:54     ` Michael Grzeschik
2012-11-28  1:26       ` Peter Chen
2012-11-14 16:19 ` [PATCH 7/9] usb: chipidea: udc: add force-full-speed option Michael Grzeschik
2012-11-16 12:51   ` Alexander Shishkin
2012-11-16 14:53     ` Matthieu CASTET
2012-11-14 16:19 ` [PATCH 8/9] usb: chipidea: udc: remove unlocked ep_queue which can lead to an race Michael Grzeschik
2012-11-16 12:55   ` Alexander Shishkin
2012-11-14 16:19 ` [PATCH 9/9] usb: chipidea: udc: configure iso endpoints Michael Grzeschik
2012-11-14 18:04   ` Sergei Shtylyov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20121116131628.GA21447@pengutronix.de \
    --to=mgr@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).