From mboxrd@z Thu Jan 1 00:00:00 1970 From: thierry.reding@avionic-design.de (Thierry Reding) Date: Tue, 20 Nov 2012 13:16:03 +0100 Subject: [PATCH v3 0/2] pwm fixes for 3.8 In-Reply-To: <1353347086-4572-1-git-send-email-linux@prisktech.co.nz> References: <1353347086-4572-1-git-send-email-linux@prisktech.co.nz> Message-ID: <20121120121603.GA16752@avionic-0098.adnet.avionic-design.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, Nov 20, 2012 at 06:44:44AM +1300, Tony Prisk wrote: > Hi Theirry, > > I felt the error message for clk_enable in vt8500_pwm_config() needed > to somehow indicate that the clk_enable failed in this function otherwise > if there is a problem, you can't tell which of the clk_enable's > generated the fail message. > If there is a clock error - as you pointed out - it will probably fail > elsewhere as well so I've changed it to match the other error messages. > > These should be applied on top of the original patch. > > v2: Add error checking for clk_enable() > v3: Remove superfluous ;'s. Error message style correction. > > Tony Prisk (2): > Fix build error in pwm-vt8500.c > pwm: vt8500: Ensure pwm clock is enabled during pwm_config > > drivers/pwm/pwm-vt8500.c | 16 +++++++++++++--- > 1 file changed, 13 insertions(+), 3 deletions(-) Applied with minor stylistic fixups to the commit message, thanks. Thierry -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: not available URL: