* [PULL pinctrl-for 3.8] at91 update
@ 2012-11-20 21:44 Jean-Christophe PLAGNIOL-VILLARD
2012-11-21 9:53 ` Linus Walleij
0 siblings, 1 reply; 4+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-11-20 21:44 UTC (permalink / raw)
To: linux-arm-kernel
Hi Linus,
this pull go over the pinctrl at91 branch
This contain pinctrl ond dt that depends on
The following changes since commit f6f94f6660dbe34039e5c86a46c7845589e7ee0c:
pinctrl: at91: Staticize non-exported symbols (2012-11-05 14:30:45 +0100)
are available in the git repository at:
git://github.com/at91linux/linux-at91.git delivery/pinctrl-at91-3.8
for you to fetch changes up to ad8a15d99cf2c8ab8ac1ab28402c49ec2548358d:
ARM: at91: add Somfy Animeo IP board support (2012-11-19 07:51:11 +0800)
----------------------------------------------------------------
Jean-Christophe PLAGNIOL-VILLARD (7):
pinctrl: at91: provide gpio names
pinctrl: at91 add deglitch, debounce, pull down and schmitt trigger mux option support
ARM: at91sam9: add macb pinctrl support
ARM: at91: fix usart/uart namimg in pinctrl
ARM: at91: dt: at91sam9260: split rts and cts pinctrl not
ARM: at91: add Ronetix pm9g45 board support
ARM: at91: add Somfy Animeo IP board support
Joachim Eastwood (6):
ARM: AT91: Fix build failure on board-dt
ARM: AT91: Add DT support to AT91RM9200 System Timer
ARM: AT91: Add usart/tc/pio/ohci DT clock lookup to AT91RM9200
ARM: AT91: Add AT91RM9200 DT board
ARM: AT91: Add AT91RM9200 device tree
ARM: AT91: Add AT91RM9200EK board device tree
Documentation/devicetree/bindings/arm/atmel-at91.txt | 6 +++
Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt | 9 +++-
arch/arm/boot/dts/Makefile | 4 ++
arch/arm/boot/dts/animeo_ip.dts | 166 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/at91rm9200.dtsi | 349 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/at91rm9200ek.dts | 79 +++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/at91sam9260.dtsi | 132 +++++++++++++++++++++++++++++++++++++++++-----------------
arch/arm/boot/dts/at91sam9263.dtsi | 78 +++++++++++++++++++++++++++--------
arch/arm/boot/dts/at91sam9263ek.dts | 5 ++-
arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 11 ++---
arch/arm/boot/dts/at91sam9g45.dtsi | 92 ++++++++++++++++++++++++++++++-----------
arch/arm/boot/dts/at91sam9m10g45ek.dts | 5 ++-
arch/arm/boot/dts/at91sam9n12.dtsi | 62 +++++++++++++++++-----------
arch/arm/boot/dts/at91sam9x25.dtsi | 21 ++++++++++
arch/arm/boot/dts/at91sam9x5.dtsi | 100 ++++++++++++++++++++++++++++++++------------
arch/arm/boot/dts/pm9g45.dts | 144 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-at91/Kconfig | 9 ++++
arch/arm/mach-at91/Makefile | 1 +
arch/arm/mach-at91/at91rm9200.c | 18 ++++++++
arch/arm/mach-at91/at91rm9200_time.c | 63 +++++++++++++++++++++++++++-
arch/arm/mach-at91/board-rm9200-dt.c | 57 +++++++++++++++++++++++++
arch/arm/mach-at91/generic.h | 1 +
arch/arm/mach-at91/setup.c | 14 +++++++
drivers/pinctrl/pinctrl-at91.c | 126 +++++++++++++++++++++++++++++++++++++++++++++++++++++++-
24 files changed, 1410 insertions(+), 142 deletions(-)
create mode 100644 arch/arm/boot/dts/animeo_ip.dts
create mode 100644 arch/arm/boot/dts/at91rm9200.dtsi
create mode 100644 arch/arm/boot/dts/at91rm9200ek.dts
create mode 100644 arch/arm/boot/dts/pm9g45.dts
create mode 100644 arch/arm/mach-at91/board-rm9200-dt.c
Best Regards,
J.
^ permalink raw reply [flat|nested] 4+ messages in thread* [PULL pinctrl-for 3.8] at91 update
2012-11-20 21:44 [PULL pinctrl-for 3.8] at91 update Jean-Christophe PLAGNIOL-VILLARD
@ 2012-11-21 9:53 ` Linus Walleij
2012-11-21 10:11 ` Nicolas Ferre
2012-11-21 10:17 ` Jean-Christophe PLAGNIOL-VILLARD
0 siblings, 2 replies; 4+ messages in thread
From: Linus Walleij @ 2012-11-21 9:53 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Nov 20, 2012 at 10:44 PM, Jean-Christophe PLAGNIOL-VILLARD
<plagnioj@jcrosoft.com> wrote:
> Hi Linus,
>
> this pull go over the pinctrl at91 branch
>
> This contain pinctrl ond dt that depends on
>
> The following changes since commit f6f94f6660dbe34039e5c86a46c7845589e7ee0c:
>
> pinctrl: at91: Staticize non-exported symbols (2012-11-05 14:30:45 +0100)
>
> are available in the git repository at:
>
> git://github.com/at91linux/linux-at91.git delivery/pinctrl-at91-3.8
OK I branched off my earlier at91 branch merge, pulled this in
(no conflicts) and then merged that new at91 branch into
my devel HEAD, and magically it just works, thanks
Jean-Christophe!
(I guess Nicolas is fine with me merging these patches too, else
he gets to say it now :-)
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PULL pinctrl-for 3.8] at91 update
2012-11-21 9:53 ` Linus Walleij
@ 2012-11-21 10:11 ` Nicolas Ferre
2012-11-21 10:17 ` Jean-Christophe PLAGNIOL-VILLARD
1 sibling, 0 replies; 4+ messages in thread
From: Nicolas Ferre @ 2012-11-21 10:11 UTC (permalink / raw)
To: linux-arm-kernel
On 11/21/2012 10:53 AM, Linus Walleij :
> On Tue, Nov 20, 2012 at 10:44 PM, Jean-Christophe PLAGNIOL-VILLARD
> <plagnioj@jcrosoft.com> wrote:
>
>> Hi Linus,
>>
>> this pull go over the pinctrl at91 branch
>>
>> This contain pinctrl ond dt that depends on
>>
>> The following changes since commit f6f94f6660dbe34039e5c86a46c7845589e7ee0c:
>>
>> pinctrl: at91: Staticize non-exported symbols (2012-11-05 14:30:45 +0100)
>>
>> are available in the git repository at:
>>
>> git://github.com/at91linux/linux-at91.git delivery/pinctrl-at91-3.8
>
> OK I branched off my earlier at91 branch merge, pulled this in
> (no conflicts) and then merged that new at91 branch into
> my devel HEAD, and magically it just works, thanks
> Jean-Christophe!
>
> (I guess Nicolas is fine with me merging these patches too, else
> he gets to say it now :-)
Absolutely, Jean-Christophe told me about his plans to merge some
DT/boards code through your tree.
Thanks for your help with this big step for us (AT91 folks)!
Bye Linus,
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PULL pinctrl-for 3.8] at91 update
2012-11-21 9:53 ` Linus Walleij
2012-11-21 10:11 ` Nicolas Ferre
@ 2012-11-21 10:17 ` Jean-Christophe PLAGNIOL-VILLARD
1 sibling, 0 replies; 4+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-11-21 10:17 UTC (permalink / raw)
To: linux-arm-kernel
On 10:53 Wed 21 Nov , Linus Walleij wrote:
> On Tue, Nov 20, 2012 at 10:44 PM, Jean-Christophe PLAGNIOL-VILLARD
> <plagnioj@jcrosoft.com> wrote:
>
> > Hi Linus,
> >
> > this pull go over the pinctrl at91 branch
> >
> > This contain pinctrl ond dt that depends on
> >
> > The following changes since commit f6f94f6660dbe34039e5c86a46c7845589e7ee0c:
> >
> > pinctrl: at91: Staticize non-exported symbols (2012-11-05 14:30:45 +0100)
> >
> > are available in the git repository at:
> >
> > git://github.com/at91linux/linux-at91.git delivery/pinctrl-at91-3.8
>
> OK I branched off my earlier at91 branch merge, pulled this in
> (no conflicts) and then merged that new at91 branch into
> my devel HEAD, and magically it just works, thanks
> Jean-Christophe!
your welcome and tks
Best Regards,
J.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-11-21 10:17 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-11-20 21:44 [PULL pinctrl-for 3.8] at91 update Jean-Christophe PLAGNIOL-VILLARD
2012-11-21 9:53 ` Linus Walleij
2012-11-21 10:11 ` Nicolas Ferre
2012-11-21 10:17 ` Jean-Christophe PLAGNIOL-VILLARD
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).