From mboxrd@z Thu Jan  1 00:00:00 1970
From: s.hauer@pengutronix.de (Sascha Hauer)
Date: Mon, 26 Nov 2012 10:59:56 +0100
Subject: [PATCH 3/4] imx27-dt: configure i2c1 gpio on armadeus apf27
In-Reply-To: <20121126102858.4ba818b0@skate>
References: <1353874625-14754-1-git-send-email-tremyfr@yahoo.fr>
 <1353874625-14754-4-git-send-email-tremyfr@yahoo.fr>
 <20121126102858.4ba818b0@skate>
Message-ID: <20121126095956.GD10369@pengutronix.de>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Mon, Nov 26, 2012 at 10:28:58AM +0100, Thomas Petazzoni wrote:
> Dear Philippe Reynes,
> 
> On Sun, 25 Nov 2012 21:17:04 +0100, Philippe Reynes wrote:
> 
> >  static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = {
> > @@ -48,6 +49,10 @@ int apf27_lan8700_wakeup(struct phy_device *phydev)
> >  static void __init apf27_init(void)
> >  {
> >  	phy_register_fixup_for_id("imx27-fec.0-1:1f", apf27_lan8700_wakeup);
> > +
> > +	/* configure i2c1 gpio */
> > +	mxc_gpio_mode((GPIO_PORTD | GPIO_OUT | GPIO_PF | 17));
> > +	mxc_gpio_mode((GPIO_PORTD | GPIO_OUT | GPIO_PF | 18));
> >  }
> 
> I haven't followed i.MX 27 support lately, but this surely should be
> done using a pinctrl driver. I see that there is a general pinctrl
> driver for i.MX, but a drivers/pinctrl/pinctrl-imx27.c might be
> missing. It would probably be a better idea to implement the missing
> pinctrl driver, if not already available?

It's not available, and yes, it should be implemented. Adding the iomux
setup to a i.MX27 SoC specific file is not a good idea.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |