public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: peter.chen@freescale.com (Peter Chen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/9] usb: chipidea: add PTW and PTS handling
Date: Wed, 28 Nov 2012 09:26:54 +0800	[thread overview]
Message-ID: <20121128012653.GB18593@nchen-desktop> (raw)
In-Reply-To: <20121127095432.GC31008@pengutronix.de>

On Tue, Nov 27, 2012 at 10:54:32AM +0100, Michael Grzeschik wrote:
> 
> I didn't figure out why this is needed. However, we prefer to move this
> hunk to be in ci_hdrc_probe just before ci_role_start gets called. So
> hw_portsc_configure will be called only there in the beginning. As the
> phy setup doesn't change, we need no further call and can take the delay
> unconditionally of the role.

I agree, as configure phy is common future, it is ok at ci_hdrc_probe.
Below initialization sequence is ok:

configure_phy
delay for phy stable
role_start(init)

> 
> > > +
> > >  	hcd = usb_create_hcd(&ci_ehci_hc_driver, ci->dev, dev_name(ci->dev));
> > >  	if (!hcd)
> > >  		return -ENOMEM;
> > > diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
> > > index 906d259..cafca23 100644
> > > --- a/include/linux/usb/chipidea.h
> > > +++ b/include/linux/usb/chipidea.h
> > > @@ -21,6 +21,12 @@ struct ci13xxx_platform_data {
> > >  #define CI13XXX_DISABLE_STREAMING	BIT(3)
> > >  #define CI13XXX_DR_MODE_HOST		BIT(4)
> > >  #define CI13XXX_DR_MODE_PERIPHERAL	BIT(5)
> > > +#define CI13XXX_PORTSC_PTW_8BIT		BIT(6)
> > > +#define CI13XXX_PORTSC_PTW_16BIT	BIT(7)
> > > +#define CI13XXX_PORTSC_PTS_UTMI		BIT(8)
> > > +#define CI13XXX_PORTSC_PTS_ULPI		BIT(9)
> > > +#define CI13XXX_PORTSC_PTS_FSLS		BIT(10)
> > > +
> > >  #define CI13XXX_DR_MODE_MASK \
> > >  	(CI13XXX_DR_MODE_HOST | CI13XXX_DR_MODE_PERIPHERAL)
> > >  
> > > @@ -42,4 +48,7 @@ void ci13xxx_remove_device(struct platform_device *pdev);
> > >  /* Parse of-tree "dr_mode" property */
> > >  void ci13xxx_get_dr_mode(struct device_node *of_node, struct ci13xxx_platform_data *pdata);
> > >  
> > > +/* Parse of-tree "flags" */
> > > +void ci13xxx_get_dr_flags(struct device_node *of_node, struct ci13xxx_platform_data *pdata);
> > > +
> > >  #endif
> > > -- 
> > > 1.7.10.4
> > > 
> > > --
> > > To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> > > the body of a message to majordomo at vger.kernel.org
> > > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > > 
> 
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> 

-- 

Best Regards,
Peter Chen

  reply	other threads:[~2012-11-28  1:26 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-14 16:19 [PATCH 0/9] chipidea fixes and features Michael Grzeschik
2012-11-14 16:19 ` [PATCH 1/9] usb: chipidea: pci: mark platformdata as static and __devinitdata Michael Grzeschik
2012-11-16 10:06   ` Alexander Shishkin
2012-11-16 10:17     ` Marc Kleine-Budde
2012-11-16 11:41       ` Alexander Shishkin
2012-11-16 12:02     ` Greg KH
2012-11-14 16:19 ` [PATCH 2/9] usb: chipidea: ci13xxx_imx: add 2nd and 3rd clock to support imx5x and newer Michael Grzeschik
2012-11-26  9:29   ` Peter Chen
2012-11-26 10:22     ` Sascha Hauer
2012-11-27  6:50       ` Peter Chen
2012-11-27  7:34         ` Sascha Hauer
2012-11-14 16:19 ` [PATCH 3/9] usb: chipidea: ci13xxx-imx: create dynamic platformdata Michael Grzeschik
2012-11-16 10:14   ` Alexander Shishkin
2012-11-16 10:19     ` Marc Kleine-Budde
2012-11-16 12:06   ` Alexander Shishkin
2012-11-14 16:19 ` [PATCH 4/9] usb: chipidea: ci13xxx-imx: add "dr_mode" property to device tree bindings Michael Grzeschik
2012-11-16 11:53   ` Alexander Shishkin
2012-11-16 11:55     ` Marc Kleine-Budde
2012-11-26  9:46     ` Peter Chen
2012-11-29 12:54       ` Alexander Shishkin
2012-11-14 16:19 ` [PATCH 5/9] usb: add phy connection by phy-mode Michael Grzeschik
2012-11-16  9:25   ` Alexander Shishkin
2012-11-16 11:28   ` Felipe Balbi
2012-11-16 11:31   ` Felipe Balbi
2012-11-16 11:44     ` Marc Kleine-Budde
2012-11-16 13:41       ` Felipe Balbi
2012-11-16 14:32         ` Marc Kleine-Budde
2012-11-26  9:56   ` Peter Chen
2012-11-14 16:19 ` [PATCH 6/9] usb: chipidea: add PTW and PTS handling Michael Grzeschik
2012-11-16 12:18   ` Alexander Shishkin
2012-11-16 12:45   ` Alexander Shishkin
2012-11-16 13:16     ` Michael Grzeschik
2012-11-16 13:34       ` Alexander Shishkin
2012-11-16 13:57         ` Michael Grzeschik
2012-11-16 14:06           ` Alexander Shishkin
2012-11-16 14:46             ` Matthieu CASTET
2012-11-16 15:39               ` Alexander Shishkin
2012-11-21 15:57                 ` Michael Grzeschik
2012-11-21 16:06                   ` Matthieu CASTET
2012-11-27  1:12   ` Peter Chen
2012-11-27  9:54     ` Michael Grzeschik
2012-11-28  1:26       ` Peter Chen [this message]
2012-11-14 16:19 ` [PATCH 7/9] usb: chipidea: udc: add force-full-speed option Michael Grzeschik
2012-11-16 12:51   ` Alexander Shishkin
2012-11-16 14:53     ` Matthieu CASTET
2012-11-14 16:19 ` [PATCH 8/9] usb: chipidea: udc: remove unlocked ep_queue which can lead to an race Michael Grzeschik
2012-11-16 12:55   ` Alexander Shishkin
2012-11-14 16:19 ` [PATCH 9/9] usb: chipidea: udc: configure iso endpoints Michael Grzeschik
2012-11-14 18:04   ` Sergei Shtylyov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20121128012653.GB18593@nchen-desktop \
    --to=peter.chen@freescale.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox