linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/1 v2] gpio: Provide the STMPE GPIO driver with its own IRQ Domain
Date: Mon, 10 Dec 2012 10:07:54 +0000	[thread overview]
Message-ID: <20121210100754.GB9362@gmail.com> (raw)
In-Reply-To: <1353683949-9275-1-git-send-email-lee.jones@linaro.org>

Author: Lee Jones <lee.jones@linaro.org>
Date:   Fri Nov 23 12:36:23 2012 +0000

    gpio: Provide the STMPE GPIO driver with its own IRQ Domain
    
    The STMPE GPIO driver can be used as an IRQ controller by some
    related devices. Here we provide it with its very own IRQ Domain
    so that IRQs can be issued dynamically. This will stand the
    driver in good stead when it is enabled for Device Tree, as this
    it a prerequisite.
    
    Cc: Grant Likely <grant.likely@secretlab.ca>
    Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
    Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c
index dce3472..6365cd0 100644
--- a/drivers/gpio/gpio-stmpe.c
+++ b/drivers/gpio/gpio-stmpe.c
@@ -11,6 +11,7 @@
 #include <linux/slab.h>
 #include <linux/gpio.h>
 #include <linux/irq.h>
+#include <linux/irqdomain.h>
 #include <linux/interrupt.h>
 #include <linux/mfd/stmpe.h>
 
@@ -28,6 +29,7 @@ struct stmpe_gpio {
 	struct stmpe *stmpe;
 	struct device *dev;
 	struct mutex irq_lock;
+	struct irq_domain *domain;
 
 	int irq_base;
 	unsigned norequest_mask;
@@ -103,7 +105,7 @@ static int stmpe_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 {
 	struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip);
 
-	return stmpe_gpio->irq_base + offset;
+	return irq_create_mapping(stmpe_gpio->domain, offset);
 }
 
 static int stmpe_gpio_request(struct gpio_chip *chip, unsigned offset)
@@ -132,7 +134,7 @@ static struct gpio_chip template_chip = {
 static int stmpe_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 {
 	struct stmpe_gpio *stmpe_gpio = irq_data_get_irq_chip_data(d);
-	int offset = d->irq - stmpe_gpio->irq_base;
+	int offset = d->hwirq;
 	int regoffset = offset / 8;
 	int mask = 1 << (offset % 8);
 
@@ -199,7 +201,7 @@ static void stmpe_gpio_irq_sync_unlock(struct irq_data *d)
 static void stmpe_gpio_irq_mask(struct irq_data *d)
 {
 	struct stmpe_gpio *stmpe_gpio = irq_data_get_irq_chip_data(d);
-	int offset = d->irq - stmpe_gpio->irq_base;
+	int offset = d->hwirq;
 	int regoffset = offset / 8;
 	int mask = 1 << (offset % 8);
 
@@ -209,7 +211,7 @@ static void stmpe_gpio_irq_mask(struct irq_data *d)
 static void stmpe_gpio_irq_unmask(struct irq_data *d)
 {
 	struct stmpe_gpio *stmpe_gpio = irq_data_get_irq_chip_data(d);
-	int offset = d->irq - stmpe_gpio->irq_base;
+	int offset = d->hwirq;
 	int regoffset = offset / 8;
 	int mask = 1 << (offset % 8);
 
@@ -251,8 +253,9 @@ static irqreturn_t stmpe_gpio_irq(int irq, void *dev)
 		while (stat) {
 			int bit = __ffs(stat);
 			int line = bank * 8 + bit;
+			int virq = irq_find_mapping(stmpe_gpio->domain, line);
 
-			handle_nested_irq(stmpe_gpio->irq_base + line);
+			handle_nested_irq(virq);
 			stat &= ~(1 << bit);
 		}
 
@@ -267,38 +270,55 @@ static irqreturn_t stmpe_gpio_irq(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
-static int __devinit stmpe_gpio_irq_init(struct stmpe_gpio *stmpe_gpio)
+int stmpe_gpio_irq_map(struct irq_domain *d, unsigned int virq,
+		       irq_hw_number_t hwirq)
 {
-	int base = stmpe_gpio->irq_base;
-	int irq;
+	struct stmpe_gpio *stmpe_gpio = d->host_data;
+
+	if (!stmpe_gpio)
+		return -EINVAL;
 
-	for (irq = base; irq < base + stmpe_gpio->chip.ngpio; irq++) {
-		irq_set_chip_data(irq, stmpe_gpio);
-		irq_set_chip_and_handler(irq, &stmpe_gpio_irq_chip,
-					 handle_simple_irq);
-		irq_set_nested_thread(irq, 1);
+	irq_set_chip_data(hwirq, stmpe_gpio);
+	irq_set_chip_and_handler(hwirq, &stmpe_gpio_irq_chip,
+				 handle_simple_irq);
+	irq_set_nested_thread(hwirq, 1);
 #ifdef CONFIG_ARM
-		set_irq_flags(irq, IRQF_VALID);
+	set_irq_flags(hwirq, IRQF_VALID);
 #else
-		irq_set_noprobe(irq);
+	irq_set_noprobe(hwirq);
 #endif
-	}
 
 	return 0;
 }
 
-static void stmpe_gpio_irq_remove(struct stmpe_gpio *stmpe_gpio)
+void stmpe_gpio_irq_unmap(struct irq_domain *d, unsigned int virq)
 {
-	int base = stmpe_gpio->irq_base;
-	int irq;
-
-	for (irq = base; irq < base + stmpe_gpio->chip.ngpio; irq++) {
 #ifdef CONFIG_ARM
-		set_irq_flags(irq, 0);
+	set_irq_flags(virq, 0);
 #endif
-		irq_set_chip_and_handler(irq, NULL, NULL);
-		irq_set_chip_data(irq, NULL);
+	irq_set_chip_and_handler(virq, NULL, NULL);
+	irq_set_chip_data(virq, NULL);
+}
+
+static const struct irq_domain_ops stmpe_gpio_irq_simple_ops = {
+	.unmap = stmpe_gpio_irq_unmap,
+	.map = stmpe_gpio_irq_map,
+	.xlate = irq_domain_xlate_twocell,
+};
+
+static int __devinit stmpe_gpio_irq_init(struct stmpe_gpio *stmpe_gpio)
+{
+	int base = stmpe_gpio->irq_base;
+
+	stmpe_gpio->domain = irq_domain_add_simple(NULL,
+				stmpe_gpio->chip.ngpio, base,
+				&stmpe_gpio_irq_simple_ops, stmpe_gpio);
+	if (!stmpe_gpio->domain) {
+		dev_err(stmpe_gpio->dev, "failed to create irqdomain\n");
+		return -ENOSYS;
 	}
+
+	return 0;
 }
 
 static int __devinit stmpe_gpio_probe(struct platform_device *pdev)
@@ -348,7 +368,7 @@ static int __devinit stmpe_gpio_probe(struct platform_device *pdev)
 				IRQF_ONESHOT, "stmpe-gpio", stmpe_gpio);
 		if (ret) {
 			dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
-			goto out_removeirq;
+			goto out_disable;
 		}
 	}
 
@@ -368,9 +388,6 @@ static int __devinit stmpe_gpio_probe(struct platform_device *pdev)
 out_freeirq:
 	if (irq >= 0)
 		free_irq(irq, stmpe_gpio);
-out_removeirq:
-	if (irq >= 0)
-		stmpe_gpio_irq_remove(stmpe_gpio);
 out_disable:
 	stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
 out_free:
@@ -398,10 +415,9 @@ static int __devexit stmpe_gpio_remove(struct platform_device *pdev)
 
 	stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
 
-	if (irq >= 0) {
+	if (irq >= 0)
 		free_irq(irq, stmpe_gpio);
-		stmpe_gpio_irq_remove(stmpe_gpio);
-	}
+
 	platform_set_drvdata(pdev, NULL);
 	kfree(stmpe_gpio);

  parent reply	other threads:[~2012-12-10 10:07 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-23 15:19 [PATCH 1/1] gpio: Provide the STMPE GPIO driver with its own IRQ Domain Lee Jones
2012-11-30 14:01 ` Lee Jones
2012-12-01 16:25 ` Linus Walleij
2012-12-04  9:14   ` Lee Jones
2012-12-10 10:07 ` Lee Jones [this message]
2012-12-10 10:21   ` [PATCH 1/1 v2] " Linus Walleij
2012-12-10 10:26     ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20121210100754.GB9362@gmail.com \
    --to=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).