From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Thu, 13 Dec 2012 09:10:04 +0000 Subject: [PATCH] input:stmpe-ts: Add support to report BTN_TOUCH event In-Reply-To: <7c50ed5f531db8ab992ebeaf1a48853a6274faf2.1355376050.git.vipulkumar.samar@st.com> References: <7c50ed5f531db8ab992ebeaf1a48853a6274faf2.1355376050.git.vipulkumar.samar@st.com> Message-ID: <20121213091004.GF27617@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thu, 13 Dec 2012, Vipul Kumar Samar wrote: > stmpe touchscreen supports BTN_TOUCH event but doesn't report it. Add > BTN_TOUCH reporting capability to the stmpe touchscreen driver. > > Signed-off-by: Vipul Kumar Samar > --- > drivers/input/touchscreen/stmpe-ts.c | 2 ++ > 1 files changed, 2 insertions(+), 0 deletions(-) > > diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c > index 076442a..c3399a1 100644 > --- a/drivers/input/touchscreen/stmpe-ts.c > +++ b/drivers/input/touchscreen/stmpe-ts.c > @@ -121,6 +121,7 @@ static void stmpe_work(struct work_struct *work) > __stmpe_reset_fifo(ts->stmpe); > > input_report_abs(ts->idev, ABS_PRESSURE, 0); > + input_report_key(ts->idev, BTN_TOUCH, 0); > input_sync(ts->idev); > } > > @@ -154,6 +155,7 @@ static irqreturn_t stmpe_ts_handler(int irq, void *data) > input_report_abs(ts->idev, ABS_X, x); > input_report_abs(ts->idev, ABS_Y, y); > input_report_abs(ts->idev, ABS_PRESSURE, z); > + input_report_key(ts->idev, BTN_TOUCH, 1); > input_sync(ts->idev); > > /* flush the FIFO after we have read out our values. */ > -- > 1.7.2.2 So long as it's tested/working, the code looks fine so: Acked-by: Lee Jones -- Lee Jones Linaro ST-Ericsson Landing Team Lead Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog