From mboxrd@z Thu Jan 1 00:00:00 1970 From: dmitry.torokhov@gmail.com (Dmitry Torokhov) Date: Sun, 16 Dec 2012 23:11:45 -0800 Subject: [PATCH] input:stmpe-ts: Add support to report BTN_TOUCH event In-Reply-To: <20121213091004.GF27617@gmail.com> References: <7c50ed5f531db8ab992ebeaf1a48853a6274faf2.1355376050.git.vipulkumar.samar@st.com> <20121213091004.GF27617@gmail.com> Message-ID: <20121217071144.GA10898@core.coreip.homeip.net> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thu, Dec 13, 2012 at 09:10:04AM +0000, Lee Jones wrote: > On Thu, 13 Dec 2012, Vipul Kumar Samar wrote: > > > stmpe touchscreen supports BTN_TOUCH event but doesn't report it. Add > > BTN_TOUCH reporting capability to the stmpe touchscreen driver. > > > > Signed-off-by: Vipul Kumar Samar > > --- > > drivers/input/touchscreen/stmpe-ts.c | 2 ++ > > 1 files changed, 2 insertions(+), 0 deletions(-) > > > > diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c > > index 076442a..c3399a1 100644 > > --- a/drivers/input/touchscreen/stmpe-ts.c > > +++ b/drivers/input/touchscreen/stmpe-ts.c > > @@ -121,6 +121,7 @@ static void stmpe_work(struct work_struct *work) > > __stmpe_reset_fifo(ts->stmpe); > > > > input_report_abs(ts->idev, ABS_PRESSURE, 0); > > + input_report_key(ts->idev, BTN_TOUCH, 0); > > input_sync(ts->idev); > > } > > > > @@ -154,6 +155,7 @@ static irqreturn_t stmpe_ts_handler(int irq, void *data) > > input_report_abs(ts->idev, ABS_X, x); > > input_report_abs(ts->idev, ABS_Y, y); > > input_report_abs(ts->idev, ABS_PRESSURE, z); > > + input_report_key(ts->idev, BTN_TOUCH, 1); > > input_sync(ts->idev); > > > > /* flush the FIFO after we have read out our values. */ > > -- > > 1.7.2.2 > > So long as it's tested/working, the code looks fine so: > > Acked-by: Lee Jones Applied, thank you. -- Dmitry