From mboxrd@z Thu Jan 1 00:00:00 1970 From: linux@arm.linux.org.uk (Russell King - ARM Linux) Date: Thu, 20 Dec 2012 20:51:13 +0000 Subject: [PATCH 4/4] net/smsc911x: Provide common clock functionality In-Reply-To: <20121220203514.GN2691@gmail.com> References: <1355937587-31730-1-git-send-email-lee.jones@linaro.org> <1355937587-31730-4-git-send-email-lee.jones@linaro.org> <20121220192441.GC14363@n2100.arm.linux.org.uk> <20121220203514.GN2691@gmail.com> Message-ID: <20121220205113.GD14363@n2100.arm.linux.org.uk> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thu, Dec 20, 2012 at 08:35:14PM +0000, Lee Jones wrote: > On Thu, 20 Dec 2012, Russell King - ARM Linux wrote: > > > On Thu, Dec 20, 2012 at 08:12:08PM +0100, Linus Walleij wrote: > > > On Wed, Dec 19, 2012 at 6:19 PM, Lee Jones wrote: > > > > > > > Some platforms provide clocks which require enabling before the > > > > SMSC911x chip will power on. This patch uses the new common clk > > > > framework to do just that. If no clock is provided, it will just > > > > be ignored and the driver will continue to assume that no clock > > > > is required for the chip to run successfully. > > > > > > > > Cc: Steve Glendinning > > > > Cc: netdev at vger.kernel.org > > > > Signed-off-by: Lee Jones > > > > > > Seems to me like it'll do the trick. > > > Acked-by: Linus Walleij > > > > This looks fairly dangerous. What about those platforms which use this > > driver, but don't provide a clock for it? > > > > It looks like this will result in those platforms losing their ethernet > > support. There's at least a bunch of the ARM evaluation boards which > > make use of this driver... > > Right, but nothing should regress. If no clock is provided the driver > moves on during the request and will refuse to prepare, enable and > disable there after. > > Unless I've made a mistake somewhere? If so, I'd be happy to fixup. No, but... don't use NULL for that. Use IS_ERR(pdata->clk) instead.