From mboxrd@z Thu Jan 1 00:00:00 1970 From: marex@denx.de (Marek Vasut) Date: Wed, 26 Dec 2012 06:06:26 +0100 Subject: [PATCH] mxs: spi: clear XFER_LEN in CTRL0 register during DMA In-Reply-To: <1356498088-31176-1-git-send-email-juha.lumme@gmail.com> References: <1356498088-31176-1-git-send-email-juha.lumme@gmail.com> Message-ID: <201212260606.26770.marex@denx.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Dear Juha Lumme, > On MX23 the XFER_LEN XFER_COUNT ;-) > part in CTRL0 register was improperly OR'd ... during construction of DMA descriptor chain. Instead of being freshly set. > , and > because of that too many characters Bytes > were being expected from SPI. expected from SPI during the last DMA cycle. > This caused a timeout (SSP_TIMEOUT) to happen in the last package ... during the processing of the last DMA descriptor ... > in the > DMA chain, and resulted into a corrupted read. Write too, really ;-) > This is a workaround for the problem This is actually a correct fix for the issue. > , by clearing the XFER_LEN bytes always > before reading the new size for XFER_LEN. before setting new XFER_COUNT into the ctrl0 field of DMA control transfer. > Cc: Marek Vasut > Cc: Fabio Estevam > Cc: Shawn Guo Signed-off-by: Juha Lumme All but the commit message, Acked-by: Marek Vasut > --- > drivers/spi/spi-mxs.c | 5 ++++- > 1 file changed, 4 insertions(+), 1 deletion(-) > > diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c > index 86dd04d..265c33f 100644 > --- a/drivers/spi/spi-mxs.c > +++ b/drivers/spi/spi-mxs.c > @@ -241,6 +241,7 @@ static int mxs_spi_txrx_dma(struct mxs_spi *spi, int > cs, INIT_COMPLETION(spi->c); > > ctrl0 = readl(ssp->base + HW_SSP_CTRL0); > + ctrl0 &= ~BM_SSP_CTRL0_XFER_COUNT; > ctrl0 |= BM_SSP_CTRL0_DATA_XFER | mxs_spi_cs_to_reg(cs); > > if (*first) > @@ -256,8 +257,10 @@ static int mxs_spi_txrx_dma(struct mxs_spi *spi, int > cs, if ((sg_count + 1 == sgs) && *last) > ctrl0 |= BM_SSP_CTRL0_IGNORE_CRC; > > - if (ssp->devid == IMX23_SSP) > + if (ssp->devid == IMX23_SSP) { > + ctrl0 &= ~BM_SSP_CTRL0_XFER_COUNT; > ctrl0 |= min; > + } > > dma_xfer[sg_count].pio[0] = ctrl0; > dma_xfer[sg_count].pio[3] = min; Best regards, Marek Vasut