linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 1/1 net-next] net: fec: report correct hardware stamping info to ethtool
@ 2013-01-07  2:25 Frank Li
  2013-01-07  8:34 ` Sascha Hauer
  2013-01-08  3:48 ` David Miller
  0 siblings, 2 replies; 3+ messages in thread
From: Frank Li @ 2013-01-07  2:25 UTC (permalink / raw)
  To: linux-arm-kernel

Report correct hardware stamping capability by ethtool interface.
The v1.0 ptp4l check it.

Signed-off-by: Frank Li <Frank.Li@freescale.com>
---
Change v1->v2
 1. s/capibilty/capability/
 2. apply Sascha's feedback 
    avoid return the return value of ethtool_op_get_ts_info()
    when bufdesc_ex ==  1

 drivers/net/ethernet/freescale/fec.c |   31 ++++++++++++++++++++++++++++++-
 1 files changed, 30 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
index a379319..1c117e5 100644
--- a/drivers/net/ethernet/freescale/fec.c
+++ b/drivers/net/ethernet/freescale/fec.c
@@ -1173,12 +1173,41 @@ static void fec_enet_get_drvinfo(struct net_device *ndev,
 	strcpy(info->bus_info, dev_name(&ndev->dev));
 }
 
+static int fec_enet_get_ts_info(struct net_device *ndev,
+				struct ethtool_ts_info *info)
+{
+	struct fec_enet_private *fep = netdev_priv(ndev);
+
+	if (fep->bufdesc_ex) {
+
+		info->so_timestamping = SOF_TIMESTAMPING_TX_SOFTWARE |
+					SOF_TIMESTAMPING_RX_SOFTWARE |
+					SOF_TIMESTAMPING_SOFTWARE |
+					SOF_TIMESTAMPING_TX_HARDWARE |
+					SOF_TIMESTAMPING_RX_HARDWARE |
+					SOF_TIMESTAMPING_RAW_HARDWARE;
+		if (fep->ptp_clock)
+			info->phc_index = ptp_clock_index(fep->ptp_clock);
+		else
+			info->phc_index = -1;
+
+		info->tx_types = (1 << HWTSTAMP_TX_OFF) |
+				 (1 << HWTSTAMP_TX_ON);
+
+		info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) |
+				   (1 << HWTSTAMP_FILTER_ALL);
+		return 0;
+	} else {
+		return ethtool_op_get_ts_info(ndev, info);
+	}
+}
+
 static const struct ethtool_ops fec_enet_ethtool_ops = {
 	.get_settings		= fec_enet_get_settings,
 	.set_settings		= fec_enet_set_settings,
 	.get_drvinfo		= fec_enet_get_drvinfo,
 	.get_link		= ethtool_op_get_link,
-	.get_ts_info		= ethtool_op_get_ts_info,
+	.get_ts_info		= fec_enet_get_ts_info,
 };
 
 static int fec_enet_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
-- 
1.7.1

^ permalink raw reply related	[flat|nested] 3+ messages in thread

* [PATCH v2 1/1 net-next] net: fec: report correct hardware stamping info to ethtool
  2013-01-07  2:25 [PATCH v2 1/1 net-next] net: fec: report correct hardware stamping info to ethtool Frank Li
@ 2013-01-07  8:34 ` Sascha Hauer
  2013-01-08  3:48 ` David Miller
  1 sibling, 0 replies; 3+ messages in thread
From: Sascha Hauer @ 2013-01-07  8:34 UTC (permalink / raw)
  To: linux-arm-kernel

On Mon, Jan 07, 2013 at 10:25:07AM +0800, Frank Li wrote:
> Report correct hardware stamping capability by ethtool interface.
> The v1.0 ptp4l check it.
> 
> Signed-off-by: Frank Li <Frank.Li@freescale.com>

Acked-by: Sascha Hauer <s.hauer@pengutronix.de>

Sascha

> ---
> Change v1->v2
>  1. s/capibilty/capability/
>  2. apply Sascha's feedback 
>     avoid return the return value of ethtool_op_get_ts_info()
>     when bufdesc_ex ==  1
> 
>  drivers/net/ethernet/freescale/fec.c |   31 ++++++++++++++++++++++++++++++-
>  1 files changed, 30 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
> index a379319..1c117e5 100644
> --- a/drivers/net/ethernet/freescale/fec.c
> +++ b/drivers/net/ethernet/freescale/fec.c
> @@ -1173,12 +1173,41 @@ static void fec_enet_get_drvinfo(struct net_device *ndev,
>  	strcpy(info->bus_info, dev_name(&ndev->dev));
>  }
>  
> +static int fec_enet_get_ts_info(struct net_device *ndev,
> +				struct ethtool_ts_info *info)
> +{
> +	struct fec_enet_private *fep = netdev_priv(ndev);
> +
> +	if (fep->bufdesc_ex) {
> +
> +		info->so_timestamping = SOF_TIMESTAMPING_TX_SOFTWARE |
> +					SOF_TIMESTAMPING_RX_SOFTWARE |
> +					SOF_TIMESTAMPING_SOFTWARE |
> +					SOF_TIMESTAMPING_TX_HARDWARE |
> +					SOF_TIMESTAMPING_RX_HARDWARE |
> +					SOF_TIMESTAMPING_RAW_HARDWARE;
> +		if (fep->ptp_clock)
> +			info->phc_index = ptp_clock_index(fep->ptp_clock);
> +		else
> +			info->phc_index = -1;
> +
> +		info->tx_types = (1 << HWTSTAMP_TX_OFF) |
> +				 (1 << HWTSTAMP_TX_ON);
> +
> +		info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) |
> +				   (1 << HWTSTAMP_FILTER_ALL);
> +		return 0;
> +	} else {
> +		return ethtool_op_get_ts_info(ndev, info);
> +	}
> +}
> +
>  static const struct ethtool_ops fec_enet_ethtool_ops = {
>  	.get_settings		= fec_enet_get_settings,
>  	.set_settings		= fec_enet_set_settings,
>  	.get_drvinfo		= fec_enet_get_drvinfo,
>  	.get_link		= ethtool_op_get_link,
> -	.get_ts_info		= ethtool_op_get_ts_info,
> +	.get_ts_info		= fec_enet_get_ts_info,
>  };
>  
>  static int fec_enet_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
> -- 
> 1.7.1
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

^ permalink raw reply	[flat|nested] 3+ messages in thread

* [PATCH v2 1/1 net-next] net: fec: report correct hardware stamping info to ethtool
  2013-01-07  2:25 [PATCH v2 1/1 net-next] net: fec: report correct hardware stamping info to ethtool Frank Li
  2013-01-07  8:34 ` Sascha Hauer
@ 2013-01-08  3:48 ` David Miller
  1 sibling, 0 replies; 3+ messages in thread
From: David Miller @ 2013-01-08  3:48 UTC (permalink / raw)
  To: linux-arm-kernel

From: Frank Li <Frank.Li@freescale.com>
Date: Mon, 7 Jan 2013 10:25:07 +0800

> Report correct hardware stamping capability by ethtool interface.
> The v1.0 ptp4l check it.
> 
> Signed-off-by: Frank Li <Frank.Li@freescale.com>

Applied.

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2013-01-08  3:48 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-01-07  2:25 [PATCH v2 1/1 net-next] net: fec: report correct hardware stamping info to ethtool Frank Li
2013-01-07  8:34 ` Sascha Hauer
2013-01-08  3:48 ` David Miller

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).