From mboxrd@z Thu Jan 1 00:00:00 1970 From: simon.guinot@sequanux.org (Simon Guinot) Date: Mon, 7 Jan 2013 16:09:18 +0100 Subject: Reboot hangs on Kirkwood ns2 boards with 3.8-rc2 In-Reply-To: <20130106083521.GO17242@lunn.ch> References: <20130106033455.GH1357@kw.sim.vm.gnt> <20130106083521.GO17242@lunn.ch> Message-ID: <20130107150918.GI1357@kw.sim.vm.gnt> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sun, Jan 06, 2013 at 09:35:21AM +0100, Andrew Lunn wrote: > On Sun, Jan 06, 2013 at 04:34:55AM +0100, Simon Guinot wrote: > > Hi Andrew and Jason, > > > > While testing 3.8-rc2 on the ns2 boards (DT based), I noticed that > > reboot is not working. After issuing a reboot, the kernel hangs. No > > error messages are displayed. Moreover, on my non-DT Kirkwood boards, > > reboot is working as expected. > > > > Am I the only one to experiment this issue ? > > Hi Simon > > No you are not the only one. There is a patch available, authored by > me, which is identical to what you found. Arf, it's a shame I have missed this reports. It could have spared some time by asking at you earlier. About the issue itself. I understand that a clock is needed by the orion-ehci driver. But even if the clock is not provided by the DT, it should have been fixed by kirkwood_legacy_clk_init(), isn't ? What's wrong with this workaround ? Simon -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 198 bytes Desc: Digital signature URL: