From mboxrd@z Thu Jan 1 00:00:00 1970 From: w@1wt.eu (Willy Tarreau) Date: Mon, 7 Jan 2013 19:08:49 +0100 Subject: [PATCH v2] ARM: kirkwood: convert Guruplug Server Plus to use the device tree In-Reply-To: <20130107174831.GN5075@titan.lakedaemon.net> References: <20121202155124.GA30807@1wt.eu> <20121202230926.GJ12509@titan.lakedaemon.net> <20121202232226.GL30822@1wt.eu> <20121202234110.GM12509@titan.lakedaemon.net> <20121209184004.GC28052@1wt.eu> <20130107174831.GN5075@titan.lakedaemon.net> Message-ID: <20130107180849.GA28008@1wt.eu> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Jason, On Mon, Jan 07, 2013 at 12:48:31PM -0500, Jason Cooper wrote: > On Sun, Dec 09, 2012 at 07:40:04PM +0100, Willy Tarreau wrote: > > From 075e116c6cb513af0e0b9d9167ddd47e1b084bca Mon Sep 17 00:00:00 2001 > > From: Willy Tarreau > > Date: Sun, 9 Dec 2012 19:21:09 +0100 > > Subject: ARM: kirkwood: convert Guruplug Server Plus to device tree > > > > Add a device tree entry for the Guruplug Server Plus board. This port > > was based both on the work done on the dreamplug and the dockstar. > > > > It builds, boots and works on my Guruplug Server Plus. > > > > Signed-off-by: Willy Tarreau > > --- > > arch/arm/boot/dts/Makefile | 1 + > > .../arm/boot/dts/kirkwood-guruplug-server-plus.dts | 94 ++++++++++++++++++++++ > > arch/arm/mach-kirkwood/Kconfig | 7 ++ > > arch/arm/mach-kirkwood/Makefile | 1 + > > arch/arm/mach-kirkwood/board-dt.c | 4 + > > arch/arm/mach-kirkwood/board-guruplug.c | 39 +++++++++ > > arch/arm/mach-kirkwood/common.h | 5 ++ > > 7 files changed, 151 insertions(+) > > create mode 100644 arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts > > create mode 100644 arch/arm/mach-kirkwood/board-guruplug.c > > Applied to mvebu/boards. I'm assuming you meant kirkwood instead of mvebu here, but thanks anyway ! Willy