From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Wed, 9 Jan 2013 08:56:36 +0000 Subject: [PATCH 3/4] clk: ux500: Provide an alias for the SMSC911x Ethernet chip In-Reply-To: <1355937587-31730-3-git-send-email-lee.jones@linaro.org> References: <1355937587-31730-1-git-send-email-lee.jones@linaro.org> <1355937587-31730-3-git-send-email-lee.jones@linaro.org> Message-ID: <20130109085636.GB31678@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, 19 Dec 2012, Lee Jones wrote: > In the case of some of the ux500 platforms, an Ethernet chip is > placed on an extended bus which is traditionally used as a NAND > flash chip placeholder. The p3_pclk0 clock is used to control it, > so we are required to provide and easy way to access it from the > SMSC911x driver. We do this using an alias provided by this patch. > > Cc: Mike Turquette > Cc: Ulf Hansson > Signed-off-by: Lee Jones > --- > drivers/clk/ux500/u8500_clk.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c > index a601802..9d9add1 100644 > --- a/drivers/clk/ux500/u8500_clk.c > +++ b/drivers/clk/ux500/u8500_clk.c > @@ -325,6 +325,7 @@ void u8500_clk_init(void) > clk = clk_reg_prcc_pclk("p3_pclk0", "per3clk", U8500_CLKRST3_BASE, > BIT(0), 0); > clk_register_clkdev(clk, "fsmc", NULL); > + clk_register_clkdev(clk, NULL, "smsc911x"); > > clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", U8500_CLKRST3_BASE, > BIT(1), 0); > -- > 1.7.9.5 > I still need a maintiner Ack for this before I can push it. Mike? -- Lee Jones Linaro ST-Ericsson Landing Team Lead Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog