From: dave.martin@linaro.org (Dave Martin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 04/16] ARM: b.L: Add baremetal voting mutexes
Date: Fri, 11 Jan 2013 16:57:33 +0000 [thread overview]
Message-ID: <20130111165733.GH1966@linaro.org> (raw)
In-Reply-To: <alpine.LFD.2.02.1301102131010.6300@xanadu.home>
On Thu, Jan 10, 2013 at 10:15:22PM -0500, Nicolas Pitre wrote:
> On Thu, 10 Jan 2013, Will Deacon wrote:
>
> > On Thu, Jan 10, 2013 at 12:20:39AM +0000, Nicolas Pitre wrote:
> > > From: Dave Martin <dave.martin@linaro.org>
> > >
> > > This patch adds a simple low-level voting mutex implementation
> > > to be used to arbitrate during first man selection when no load/store
> > > exclusive instructions are usable.
> > >
> > > For want of a better name, these are called "vlocks". (I was
> > > tempted to call them ballot locks, but "block" is way too confusing
> > > an abbreviation...)
> > >
> > > There is no function to wait for the lock to be released, and no
> > > vlock_lock() function since we don't need these at the moment.
> > > These could straightforwardly be added if vlocks get used for other
> > > purposes.
> >
> > [...]
> >
> > > diff --git a/Documentation/arm/big.LITTLE/vlocks.txt b/Documentation/arm/big.LITTLE/vlocks.txt
> > > new file mode 100644
> > > index 0000000000..90672ddc6a
> > > --- /dev/null
> > > +++ b/Documentation/arm/big.LITTLE/vlocks.txt
> > > @@ -0,0 +1,211 @@
> > > +vlocks for Bare-Metal Mutual Exclusion
> > > +======================================
> >
> > [...]
> >
> > > +ARM implementation
> > > +------------------
> > > +
> > > +The current ARM implementation [2] contains a some optimisations beyond
> >
> > -a
>
> Fixed.
>
> >
> > > +the basic algorithm:
> > > +
> > > + * By packing the members of the currently_voting array close together,
> > > + we can read the whole array in one transaction (providing the number
> > > + of CPUs potentially contending the lock is small enough). This
> > > + reduces the number of round-trips required to external memory.
> > > +
> > > + In the ARM implementation, this means that we can use a single load
> > > + and comparison:
> > > +
> > > + LDR Rt, [Rn]
> > > + CMP Rt, #0
> > > +
> > > + ...in place of code equivalent to:
> > > +
> > > + LDRB Rt, [Rn]
> > > + CMP Rt, #0
> > > + LDRBEQ Rt, [Rn, #1]
> > > + CMPEQ Rt, #0
> > > + LDRBEQ Rt, [Rn, #2]
> > > + CMPEQ Rt, #0
> > > + LDRBEQ Rt, [Rn, #3]
> > > + CMPEQ Rt, #0
> > > +
> > > + This cuts down on the fast-path latency, as well as potentially
> > > + reducing bus contention in contended cases.
> > > +
> > > + The optimisation relies on the fact that the ARM memory system
> > > + guarantees coherency between overlapping memory accesses of
> > > + different sizes, similarly to many other architectures. Note that
> > > + we do not care which element of currently_voting appears in which
> > > + bits of Rt, so there is no need to worry about endianness in this
> > > + optimisation.
> > > +
> > > + If there are too many CPUs to read the currently_voting array in
> > > + one transaction then multiple transations are still required. The
> > > + implementation uses a simple loop of word-sized loads for this
> > > + case. The number of transactions is still fewer than would be
> > > + required if bytes were loaded individually.
> > > +
> > > +
> > > + In principle, we could aggregate further by using LDRD or LDM, but
> > > + to keep the code simple this was not attempted in the initial
> > > + implementation.
> > > +
> > > +
> > > + * vlocks are currently only used to coordinate between CPUs which are
> > > + unable to enable their caches yet. This means that the
> > > + implementation removes many of the barriers which would be required
> > > + when executing the algorithm in cached memory.
> >
> > I think you need to elaborate on this and clearly identify the
> > requirements of the memory behaviour. In reality, these locks are hardly
> > ever usable so we don't want them cropping up in driver code and the
> > like!
>
> Doesn't the following paragraph make that clear enough?
>
> Maybe we should rip out the C interface to avoid such abuses. I think
> that was initially added when we weren't sure if the C code had to be
> involved.
>
> > > + packing of the currently_voting array does not work with cached
> > > + memory unless all CPUs contending the lock are cache-coherent, due
> > > + to cache writebacks from one CPU clobbering values written by other
> > > + CPUs. (Though if all the CPUs are cache-coherent, you should be
> > > + probably be using proper spinlocks instead anyway).
> > > +
> > > +
> > > + * The "no votes yet" value used for the last_vote variable is 0 (not
> > > + -1 as in the pseudocode). This allows statically-allocated vlocks
> > > + to be implicitly initialised to an unlocked state simply by putting
> > > + them in .bss.
> >
> > You could also put them in their own section and initialise them to -1
> > there.
>
> Same argument as for bL_vectors: That is less efficient than using .bss
> which takes no image space. Plus the transformation for CPU 0 to work
> with this is basically free.
>
> > > + An offset is added to each CPU's ID for the purpose of setting this
> > > + variable, so that no CPU uses the value 0 for its ID.
> > > +
> > > +
> > > +Colophon
> > > +--------
> > > +
> > > +Originally created and documented by Dave Martin for Linaro Limited, for
> > > +use in ARM-based big.LITTLE platforms, with review and input gratefully
> > > +received from Nicolas Pitre and Achin Gupta. Thanks to Nicolas for
> > > +grabbing most of this text out of the relevant mail thread and writing
> > > +up the pseudocode.
> > > +
> > > +Copyright (C) 2012 Linaro Limited
> > > +Distributed under the terms of Version 2 of the GNU General Public
> > > +License, as defined in linux/COPYING.
> > > +
> > > +
> > > +References
> > > +----------
> > > +
> > > +[1] Lamport, L. "A New Solution of Dijkstra's Concurrent Programming
> > > + Problem", Communications of the ACM 17, 8 (August 1974), 453-455.
> > > +
> > > + http://en.wikipedia.org/wiki/Lamport%27s_bakery_algorithm
> > > +
> > > +[2] linux/arch/arm/common/vlock.S, www.kernel.org.
> > > diff --git a/arch/arm/common/vlock.S b/arch/arm/common/vlock.S
> > > new file mode 100644
> > > index 0000000000..0a1ee3a7f5
> > > --- /dev/null
> > > +++ b/arch/arm/common/vlock.S
> > > @@ -0,0 +1,108 @@
> > > +/*
> > > + * vlock.S - simple voting lock implementation for ARM
> > > + *
> > > + * Created by: Dave Martin, 2012-08-16
> > > + * Copyright: (C) 2012 Linaro Limited
> > > + *
> > > + * This program is free software; you can redistribute it and/or modify
> > > + * it under the terms of the GNU General Public License as published by
> > > + * the Free Software Foundation; either version 2 of the License, or
> > > + * (at your option) any later version.
> >
> > Your documentation is strictly GPLv2, so there's a strange discrepancy
> > here.
>
> Indeed.
>
> @Dave: your call.
This can all be strict v2. The discrepancy was unintentional.
>
> > > + *
> > > + * This program is distributed in the hope that it will be useful,
> > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > > + * GNU General Public License for more details.
> > > + *
> > > + * You should have received a copy of the GNU General Public License along
> > > + * with this program; if not, write to the Free Software Foundation, Inc.,
> > > + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
> > > + *
> > > + *
> > > + * This algorithm is described in more detail in
> > > + * Documentation/arm/big.LITTLE/vlocks.txt.
> > > + */
> > > +
> > > +#include <linux/linkage.h>
> > > +#include "vlock.h"
> > > +
> > > +#if VLOCK_VOTING_SIZE > 4
> >
> > 4? Maybe a CONFIG option or a #define in an arch vlock.h?
>
> The 4 here is actually related to the number of bytes in a word, to
> decide whether or not a loop is needed for voters enumeration. That is
> not configurable.
This is arch-specific assembler, and the 4-bytes-per-word proprty is
a fixed property of the architecture.
We could have a comment maybe:
/*
* Each voting occupies a byte, so if there are 4 or fewer, the whole
* set of voting flags can be accessed with a single word access.
*/
>
> > > +#define FEW(x...)
> > > +#define MANY(x...) x
> > > +#else
> > > +#define FEW(x...) x
> > > +#define MANY(x...)
> > > +#endif
> > > +
> > > +@ voting lock for first-man coordination
> > > +
> > > +.macro voting_begin rbase:req, rcpu:req, rscratch:req
> > > + mov \rscratch, #1
> > > + strb \rscratch, [\rbase, \rcpu]
> > > + dsb
> > > +.endm
> > > +
> > > +.macro voting_end rbase:req, rcpu:req, rscratch:req
> > > + mov \rscratch, #0
> > > + strb \rscratch, [\rbase, \rcpu]
> > > + dsb
> > > + sev
> > > +.endm
> > > +
> > > +/*
> > > + * The vlock structure must reside in Strongly-Ordered or Device memory.
> > > + * This implementation deliberately eliminates most of the barriers which
> > > + * would be required for other memory types, and assumes that independent
> > > + * writes to neighbouring locations within a cacheline do not interfere
> > > + * with one another.
> > > + */
> > > +
> > > +@ r0: lock structure base
> > > +@ r1: CPU ID (0-based index within cluster)
> > > +ENTRY(vlock_trylock)
> > > + add r1, r1, #VLOCK_VOTING_OFFSET
> > > +
> > > + voting_begin r0, r1, r2
> > > +
> > > + ldrb r2, [r0, #VLOCK_OWNER_OFFSET] @ check whether lock is held
> > > + cmp r2, #VLOCK_OWNER_NONE
> > > + bne trylock_fail @ fail if so
> > > +
> > > + strb r1, [r0, #VLOCK_OWNER_OFFSET] @ submit my vote
> > > +
> > > + voting_end r0, r1, r2
> > > +
> > > + @ Wait for the current round of voting to finish:
> > > +
> > > + MANY( mov r3, #VLOCK_VOTING_OFFSET )
> > > +0:
> > > + MANY( ldr r2, [r0, r3] )
> > > + FEW( ldr r2, [r0, #VLOCK_VOTING_OFFSET] )
> > > + cmp r2, #0
> > > + wfene
> >
> > Is there a race here? I wonder if you can end up in a situation where
> > everybody enters wfe and then there is nobody left to signal an event
> > via voting_end (if, for example the last voter sent the sev when
> > everybody else was simultaneously doing the cmp before the wfe)...
> >
> > ... actually, that's ok as long as VLOCK_VOTING_OFFSET isn't speculated,
> > which it shouldn't be from strongly-ordered memory. Fair enough!
Indeed. The order of accesses to the voting flags is guaranteed by
strongly-ordered-ness. The ordering between the strb and sev in voting_end
required a dsb, which we have. The ordering between the external load and
wfe in the waiting code is guaranteed so S-O-ness and a control dependency.
> >
> > > + bne 0b
> > > + MANY( add r3, r3, #4 )
> > > + MANY( cmp r3, #VLOCK_VOTING_OFFSET + VLOCK_VOTING_SIZE )
> > > + MANY( bne 0b )
> > > +
> > > + @ Check who won:
> > > +
> > > + ldrb r2, [r0, #VLOCK_OWNER_OFFSET]
> > > + eor r0, r1, r2 @ zero if I won, else nonzero
> > > + bx lr
> > > +
> > > +trylock_fail:
> > > + voting_end r0, r1, r2
> > > + mov r0, #1 @ nonzero indicates that I lost
> > > + bx lr
> > > +ENDPROC(vlock_trylock)
> > > +
> > > +@ r0: lock structure base
> > > +ENTRY(vlock_unlock)
> > > + mov r1, #VLOCK_OWNER_NONE
> > > + dsb
> > > + strb r1, [r0, #VLOCK_OWNER_OFFSET]
> > > + dsb
> > > + sev
> > > + bx lr
> > > +ENDPROC(vlock_unlock)
> > > diff --git a/arch/arm/common/vlock.h b/arch/arm/common/vlock.h
> > > new file mode 100644
> > > index 0000000000..94c29a6caf
> > > --- /dev/null
> > > +++ b/arch/arm/common/vlock.h
> > > @@ -0,0 +1,43 @@
> > > +/*
> > > + * vlock.h - simple voting lock implementation
> > > + *
> > > + * Created by: Dave Martin, 2012-08-16
> > > + * Copyright: (C) 2012 Linaro Limited
> > > + *
> > > + * This program is free software; you can redistribute it and/or modify
> > > + * it under the terms of the GNU General Public License as published by
> > > + * the Free Software Foundation; either version 2 of the License, or
> > > + * (at your option) any later version.
> > > + *
> > > + * This program is distributed in the hope that it will be useful,
> > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > > + * GNU General Public License for more details.
> > > + *
> > > + * You should have received a copy of the GNU General Public License along
> > > + * with this program; if not, write to the Free Software Foundation, Inc.,
> > > + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
> > > + */
> > > +
> > > +#ifndef __VLOCK_H
> > > +#define __VLOCK_H
> > > +
> > > +#include <asm/bL_entry.h>
> > > +
> > > +#define VLOCK_OWNER_OFFSET 0
> > > +#define VLOCK_VOTING_OFFSET 4
> >
> > asm-offsets again?
>
> Same answer.
I did start out by adding stuff to asm-offsets, but it just ende up
looking like cruft.
asm-offsets is primarily for synchronising C structures with asm. The
vlock structure is not accessed from C, though.
>
> > > +#define VLOCK_VOTING_SIZE ((BL_CPUS_PER_CLUSTER + 3) / 4 * 4)
> >
> > Huh?
>
> Each ballot is one byte, and we pack them into words. So this is the
> size of the required words to hold all ballots.
Hopefully we don't need a comment? I hoped this was straightforward.
>
> > > +#define VLOCK_SIZE (VLOCK_VOTING_OFFSET + VLOCK_VOTING_SIZE)
> > > +#define VLOCK_OWNER_NONE 0
> > > +
> > > +#ifndef __ASSEMBLY__
> > > +
> > > +struct vlock {
> > > + char data[VLOCK_SIZE];
> > > +};
> >
> > Does this mean the struct is only single byte aligned? You do word
> > accesses to it in your vlock code and rely on atomicity, so I'd feel
> > safer if it was aligned to 4 bytes, especially since this isn't being
> > accessed via a normal mapping.
>
> The structure size is always a multiple of 4 bytes. Its alignment is
> actually much larger than 4 as it needs to span a whole cache line not
> to be overwritten by dirty line writeback.
>
> As I mentioned before, given that this structure is allocated and
> accessed only by assembly code, we could simply remove all those unused
> C definitions to avoid potential confusion and misuse.
Agreed. Originally I anticipated this stuff being usable from C, but
this is so tenuous that providing C declarations may just confuse people.
Cheers
---Dave
next prev parent reply other threads:[~2013-01-11 16:57 UTC|newest]
Thread overview: 132+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-10 0:20 [PATCH 00/16] big.LITTLE low-level CPU and cluster power management Nicolas Pitre
2013-01-10 0:20 ` [PATCH 01/16] ARM: b.L: secondary kernel entry code Nicolas Pitre
2013-01-10 7:12 ` Stephen Boyd
2013-01-10 15:30 ` Nicolas Pitre
2013-01-10 15:34 ` Catalin Marinas
2013-01-10 16:47 ` Nicolas Pitre
2013-01-11 11:45 ` Catalin Marinas
2013-01-11 12:05 ` Lorenzo Pieralisi
2013-01-11 12:19 ` Dave Martin
2013-01-10 23:05 ` Will Deacon
2013-01-11 1:26 ` Nicolas Pitre
2013-01-11 10:55 ` Will Deacon
2013-01-11 11:35 ` Dave Martin
2013-01-11 17:16 ` Santosh Shilimkar
2013-01-11 18:10 ` Nicolas Pitre
2013-01-11 18:30 ` Santosh Shilimkar
2013-03-07 7:37 ` Pavel Machek
2013-03-07 8:57 ` Nicolas Pitre
2013-01-10 0:20 ` [PATCH 02/16] ARM: b.L: introduce the CPU/cluster power API Nicolas Pitre
2013-01-10 23:08 ` Will Deacon
2013-01-11 2:30 ` Nicolas Pitre
2013-01-11 10:58 ` Will Deacon
2013-01-11 11:29 ` Dave Martin
2013-01-11 17:26 ` Santosh Shilimkar
2013-01-11 18:33 ` Nicolas Pitre
2013-01-11 18:41 ` Santosh Shilimkar
2013-01-11 19:54 ` Nicolas Pitre
2013-01-10 0:20 ` [PATCH 03/16] ARM: b.L: introduce helpers for platform coherency exit/setup Nicolas Pitre
2013-01-10 12:01 ` Dave Martin
2013-01-10 19:04 ` Nicolas Pitre
2013-01-11 11:30 ` Dave Martin
2013-01-10 16:53 ` Catalin Marinas
2013-01-10 17:59 ` Nicolas Pitre
2013-01-10 21:50 ` Catalin Marinas
2013-01-10 22:31 ` Nicolas Pitre
2013-01-11 10:36 ` Dave Martin
2013-01-10 22:32 ` Nicolas Pitre
2013-01-10 23:13 ` Will Deacon
2013-01-11 1:50 ` Nicolas Pitre
2013-01-11 11:09 ` Dave Martin
2013-01-11 17:46 ` Santosh Shilimkar
2013-01-11 18:07 ` Dave Martin
2013-01-11 18:34 ` Santosh Shilimkar
2013-01-14 17:08 ` Dave Martin
2013-01-14 17:15 ` Catalin Marinas
2013-01-14 18:10 ` Dave Martin
2013-01-14 21:34 ` Catalin Marinas
2013-01-10 0:20 ` [PATCH 04/16] ARM: b.L: Add baremetal voting mutexes Nicolas Pitre
2013-01-10 23:18 ` Will Deacon
2013-01-11 3:15 ` Nicolas Pitre
2013-01-11 11:03 ` Will Deacon
2013-01-11 16:57 ` Dave Martin [this message]
2013-01-10 0:20 ` [PATCH 05/16] ARM: bL_head: vlock-based first man election Nicolas Pitre
2013-01-10 0:20 ` [PATCH 06/16] ARM: b.L: generic SMP secondary bringup and hotplug support Nicolas Pitre
2013-01-11 18:02 ` Santosh Shilimkar
2013-01-14 18:05 ` Achin Gupta
2013-01-15 6:32 ` Santosh Shilimkar
2013-01-15 11:18 ` Achin Gupta
2013-01-15 11:26 ` Santosh Shilimkar
2013-01-15 18:53 ` Dave Martin
2013-01-14 16:35 ` Will Deacon
2013-01-14 16:51 ` Nicolas Pitre
2013-01-15 19:09 ` Dave Martin
2013-01-10 0:20 ` [PATCH 07/16] ARM: bL_platsmp.c: close the kernel entry gate before hot-unplugging a CPU Nicolas Pitre
2013-01-14 16:37 ` Will Deacon
2013-01-14 16:53 ` Nicolas Pitre
2013-01-14 17:00 ` Will Deacon
2013-01-14 17:11 ` Catalin Marinas
2013-01-14 17:15 ` Nicolas Pitre
2013-01-14 17:23 ` Will Deacon
2013-01-14 18:26 ` Russell King - ARM Linux
2013-01-14 18:49 ` Nicolas Pitre
2013-01-15 18:40 ` Dave Martin
2013-01-16 16:06 ` Catalin Marinas
2013-01-10 0:20 ` [PATCH 08/16] ARM: bL_platsmp.c: make sure the GIC interface of a dying CPU is disabled Nicolas Pitre
2013-01-11 18:07 ` Santosh Shilimkar
2013-01-11 19:07 ` Nicolas Pitre
2013-01-12 6:50 ` Santosh Shilimkar
2013-01-12 16:47 ` Nicolas Pitre
2013-01-13 4:37 ` Santosh Shilimkar
2013-01-14 17:53 ` Lorenzo Pieralisi
2013-01-14 16:39 ` Will Deacon
2013-01-14 16:54 ` Nicolas Pitre
2013-01-14 17:02 ` Will Deacon
2013-01-14 17:18 ` Nicolas Pitre
2013-01-14 17:24 ` Will Deacon
2013-01-14 17:56 ` Lorenzo Pieralisi
2013-01-10 0:20 ` [PATCH 09/16] ARM: vexpress: Select the correct SMP operations at run-time Nicolas Pitre
2013-01-10 0:20 ` [PATCH 10/16] ARM: vexpress: introduce DCSCB support Nicolas Pitre
2013-01-11 18:12 ` Santosh Shilimkar
2013-01-11 19:13 ` Nicolas Pitre
2013-01-12 6:52 ` Santosh Shilimkar
2013-01-10 0:20 ` [PATCH 11/16] ARM: vexpress/dcscb: add CPU use counts to the power up/down API implementation Nicolas Pitre
2013-01-10 0:20 ` [PATCH 12/16] ARM: vexpress/dcscb: do not hardcode number of CPUs per cluster Nicolas Pitre
2013-01-10 0:20 ` [PATCH 13/16] drivers: misc: add ARM CCI support Nicolas Pitre
2013-01-11 18:20 ` Santosh Shilimkar
2013-01-11 19:22 ` Nicolas Pitre
2013-01-12 6:53 ` Santosh Shilimkar
2013-01-15 18:34 ` Dave Martin
2013-01-10 0:20 ` [PATCH 14/16] ARM: TC2: ensure powerdown-time data is flushed from cache Nicolas Pitre
2013-01-10 18:50 ` Dave Martin
2013-01-10 19:13 ` Nicolas Pitre
2013-01-11 11:38 ` Dave Martin
2013-01-10 0:20 ` [PATCH 15/16] ARM: vexpress/dcscb: handle platform coherency exit/setup and CCI Nicolas Pitre
2013-01-10 12:05 ` Dave Martin
2013-01-11 18:27 ` Santosh Shilimkar
2013-01-11 19:28 ` Nicolas Pitre
2013-01-12 7:21 ` Santosh Shilimkar
2013-01-14 12:25 ` Lorenzo Pieralisi
2013-01-15 6:23 ` Santosh Shilimkar
2013-01-15 18:20 ` Dave Martin
2013-01-16 6:33 ` Santosh Shilimkar
2013-01-16 10:03 ` Lorenzo Pieralisi
2013-01-16 10:12 ` Santosh Shilimkar
2013-01-10 0:20 ` [PATCH 16/16] ARM: vexpress/dcscb: probe via device tree Nicolas Pitre
2013-01-10 0:46 ` [PATCH 00/16] big.LITTLE low-level CPU and cluster power management Rob Herring
2013-01-10 5:04 ` Nicolas Pitre
2013-01-10 23:01 ` Will Deacon
2013-01-14 9:56 ` Joseph Lo
2013-01-14 14:05 ` Nicolas Pitre
2013-01-15 2:44 ` Joseph Lo
2013-01-15 16:44 ` Nicolas Pitre
2013-01-16 16:02 ` Catalin Marinas
2013-01-16 21:18 ` Nicolas Pitre
2013-01-17 17:55 ` Catalin Marinas
2013-01-15 18:31 ` Dave Martin
2013-03-07 8:27 ` Pavel Machek
2013-03-07 9:12 ` Nicolas Pitre
2013-03-07 9:40 ` Pavel Machek
2013-03-07 9:56 ` Nicolas Pitre
2013-03-07 14:51 ` Pavel Machek
2013-03-07 15:42 ` Nicolas Pitre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130111165733.GH1966@linaro.org \
--to=dave.martin@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).