From mboxrd@z Thu Jan 1 00:00:00 1970 From: balbi@ti.com (Felipe Balbi) Date: Mon, 14 Jan 2013 09:48:58 +0200 Subject: [PATCH v2 1/1] usb: fsl-mxc-udc: fix build error due to mach/hardware.h In-Reply-To: <1358147897-8599-1-git-send-email-peter.chen@freescale.com> References: <1358147897-8599-1-git-send-email-peter.chen@freescale.com> Message-ID: <20130114074858.GA10176@arwen.pp.htv.fi> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi, On Mon, Jan 14, 2013 at 03:18:17PM +0800, Peter Chen wrote: > It changes the driver to use platform_device_id rather than cpu_is_xxx > to determine the SoC type, and updates the platform code accordingly. > > Compile ok at imx_v6_v7_defconfig with CONFIG_USB_FSL_USB2 enable. > Tested at mx51 bbg board, it works ok after enable phy clock > (Need another patch to fix this problem) > > Signed-off-by: Peter Chen not good for -rc. You have to break this down as you're solving at least three different problems with this patch. Besides there are parts which are not related to the build break. -- balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: