[PATCH v2 1/1] usb: fsl-mxc-udc: fix build error due to mach/hardware.h

[peter.chen@freescale.com (Peter Chen)]

On Mon, Jan 14, 2013 at 10:50:27AM +0200, Felipe Balbi wrote:
> Hi,
> 
> On Mon, Jan 14, 2013 at 04:17:35PM +0800, Peter Chen wrote:
> > On Mon, Jan 14, 2013 at 09:48:58AM +0200, Felipe Balbi wrote:
> > > Hi,
> > > 
> > > On Mon, Jan 14, 2013 at 03:18:17PM +0800, Peter Chen wrote:
> > > > It changes the driver to use platform_device_id rather than cpu_is_xxx
> > > > to determine the SoC type, and updates the platform code accordingly.
> > > > 
> > > > Compile ok at imx_v6_v7_defconfig with CONFIG_USB_FSL_USB2 enable.
> > > > Tested at mx51 bbg board, it works ok after enable phy clock
> > > > (Need another patch to fix this problem)
> > > > 
> > > > Signed-off-by: Peter Chen <peter.chen@freescale.com>
> > > 
> > > not good for -rc. You have to break this down as you're solving at least
> > > three different problems with this patch.
> > 
> > Felipe, all my changes are for this problem, these are fix build error and
> > let it work.
> > 
> >  arch/arm/mach-imx/clk-imx25.c                     |    6 +-
> >  arch/arm/mach-imx/clk-imx27.c                     |    6 +-
> >  arch/arm/mach-imx/clk-imx31.c                     |    6 +-
> >  arch/arm/mach-imx/clk-imx35.c                     |    6 +-
> >  arch/arm/mach-imx/clk-imx51-imx53.c               |    6 +-
> > 
> >  As we change the connection-id, we need to change clock file or
> >  the devm_clk_get will be failed.
> 
> right right, that's ok.
> 
> >  arch/arm/mach-imx/devices/devices-common.h        |    1 +
> >  arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c |   15 +++---
> > 
> >  We need to differentiate SoCs, so I use platform_device_id to
> >  instead of cpu_ix_xxx(), this is for machine file change
> 
> fair enough.
> 
> >  drivers/usb/gadget/fsl_mxc_udc.c                  |   23 +++++----
> >  drivers/usb/gadget/fsl_udc_core.c                 |   52 +++++++++++++-------
> >  drivers/usb/gadget/fsl_usb2_udc.h                 |   13 ++++--
> >  include/linux/fsl_devices.h                       |    8 +++
> > 
> >  Need to get platform_device_id at driver, and replace the cpu_is_xxx to
> >  platform_device_id. Meanwhile, needs a solution for replace
> >  MX35_IO_ADDRESS.
> 
> ok, here we go:
> 
> You just listed to me three different fixes and each fix should be on a
> separate patch. Meaning that you should have one single patch to convert
> MX35_IO_ADDRESS() into ioremap(), another patch should be removing
> cpu_is_xxx() and the third one fixing connection-id.
> 
> As you might remember, we want patches to be self-contained logical
> units and your patch contains 3 of such logical units.
> 

OK, three patches. Thanks.

The reason I thought two patches is this build break contains two problems,
(MX35_IO_ADDRESS & cpu_is_xxx()).
I would like fix it together, in that case, the git bisect will only
show one build error at most.

-- 

Best Regards,
Peter Chen