From mboxrd@z Thu Jan 1 00:00:00 1970 From: mturquette@linaro.org (Mike Turquette) Date: Tue, 15 Jan 2013 15:53:23 -0800 Subject: [PATCH 3/4] clk: ux500: Provide an alias for the SMSC911x Ethernet chip In-Reply-To: <20130109085636.GB31678@gmail.com> References: <1355937587-31730-1-git-send-email-lee.jones@linaro.org> <1355937587-31730-3-git-send-email-lee.jones@linaro.org> <20130109085636.GB31678@gmail.com> Message-ID: <20130115235323.23734.52234@quantum> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Quoting Lee Jones (2013-01-09 00:56:36) > On Wed, 19 Dec 2012, Lee Jones wrote: > > > In the case of some of the ux500 platforms, an Ethernet chip is > > placed on an extended bus which is traditionally used as a NAND > > flash chip placeholder. The p3_pclk0 clock is used to control it, > > so we are required to provide and easy way to access it from the > > SMSC911x driver. We do this using an alias provided by this patch. > > > > Cc: Mike Turquette > > Cc: Ulf Hansson > > Signed-off-by: Lee Jones > > --- > > drivers/clk/ux500/u8500_clk.c | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c > > index a601802..9d9add1 100644 > > --- a/drivers/clk/ux500/u8500_clk.c > > +++ b/drivers/clk/ux500/u8500_clk.c > > @@ -325,6 +325,7 @@ void u8500_clk_init(void) > > clk = clk_reg_prcc_pclk("p3_pclk0", "per3clk", U8500_CLKRST3_BASE, > > BIT(0), 0); > > clk_register_clkdev(clk, "fsmc", NULL); > > + clk_register_clkdev(clk, NULL, "smsc911x"); > > > > clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", U8500_CLKRST3_BASE, > > BIT(1), 0); > > -- > > 1.7.9.5 > > > > I still need a maintiner Ack for this before I can push it. > > Mike? > Acked-by: Mike Turquette > -- > Lee Jones > Linaro ST-Ericsson Landing Team Lead > Linaro.org ? Open source software for ARM SoCs > Follow Linaro: Facebook | Twitter | Blog