* [V4 PATCH 01/26] usb: gadget: mv_udc: use udc_start and udc_stop functions
2013-01-21 10:07 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Chao Xie
@ 2013-01-21 10:07 ` Chao Xie
2013-01-21 10:07 ` [V4 PATCH 02/26] usb: gadget: mv_udc: use devm_xxx for probe Chao Xie
` (25 subsequent siblings)
26 siblings, 0 replies; 32+ messages in thread
From: Chao Xie @ 2013-01-21 10:07 UTC (permalink / raw)
To: linux-arm-kernel
This patches converts the driver into the new style start/stop
interface. As a result the driver no longer uses the static
global the_conroller variable.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
drivers/usb/gadget/mv_udc_core.c | 79 +++++++++++++++++---------------------
1 files changed, 35 insertions(+), 44 deletions(-)
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index 6e8b127..32a9972 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -61,9 +61,6 @@ static DECLARE_COMPLETION(release_done);
static const char driver_name[] = "mv_udc";
static const char driver_desc[] = DRIVER_DESC;
-/* controller device global variable */
-static struct mv_udc *the_controller;
-
static void nuke(struct mv_ep *ep, int status);
static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver);
@@ -1268,9 +1265,8 @@ static int mv_udc_pullup(struct usb_gadget *gadget, int is_on)
return retval;
}
-static int mv_udc_start(struct usb_gadget_driver *driver,
- int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
-static int mv_udc_stop(struct usb_gadget_driver *driver);
+static int mv_udc_start(struct usb_gadget *, struct usb_gadget_driver *);
+static int mv_udc_stop(struct usb_gadget *, struct usb_gadget_driver *);
/* device controller usb_gadget_ops structure */
static const struct usb_gadget_ops mv_ops = {
@@ -1285,8 +1281,8 @@ static const struct usb_gadget_ops mv_ops = {
/* D+ pullup, software-controlled connect/disconnect to USB host */
.pullup = mv_udc_pullup,
- .start = mv_udc_start,
- .stop = mv_udc_stop,
+ .udc_start = mv_udc_start,
+ .udc_stop = mv_udc_stop,
};
static int eps_init(struct mv_udc *udc)
@@ -1373,15 +1369,14 @@ static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver)
}
}
-static int mv_udc_start(struct usb_gadget_driver *driver,
- int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
+static int mv_udc_start(struct usb_gadget *gadget,
+ struct usb_gadget_driver *driver)
{
- struct mv_udc *udc = the_controller;
+ struct mv_udc *udc;
int retval = 0;
unsigned long flags;
- if (!udc)
- return -ENODEV;
+ udc = container_of(gadget, struct mv_udc, gadget);
if (udc->driver)
return -EBUSY;
@@ -1399,26 +1394,14 @@ static int mv_udc_start(struct usb_gadget_driver *driver,
spin_unlock_irqrestore(&udc->lock, flags);
- retval = bind(&udc->gadget, driver);
- if (retval) {
- dev_err(&udc->dev->dev, "bind to driver %s --> %d\n",
- driver->driver.name, retval);
- udc->driver = NULL;
- udc->gadget.dev.driver = NULL;
- return retval;
- }
-
if (!IS_ERR_OR_NULL(udc->transceiver)) {
retval = otg_set_peripheral(udc->transceiver->otg,
&udc->gadget);
if (retval) {
dev_err(&udc->dev->dev,
"unable to register peripheral to otg\n");
- if (driver->unbind) {
- driver->unbind(&udc->gadget);
- udc->gadget.dev.driver = NULL;
- udc->driver = NULL;
- }
+ udc->driver = NULL;
+ udc->gadget.dev.driver = NULL;
return retval;
}
}
@@ -1433,13 +1416,13 @@ static int mv_udc_start(struct usb_gadget_driver *driver,
return 0;
}
-static int mv_udc_stop(struct usb_gadget_driver *driver)
+static int mv_udc_stop(struct usb_gadget *gadget,
+ struct usb_gadget_driver *driver)
{
- struct mv_udc *udc = the_controller;
+ struct mv_udc *udc;
unsigned long flags;
- if (!udc)
- return -ENODEV;
+ udc = container_of(gadget, struct mv_udc, gadget);
spin_lock_irqsave(&udc->lock, flags);
@@ -1454,7 +1437,6 @@ static int mv_udc_stop(struct usb_gadget_driver *driver)
spin_unlock_irqrestore(&udc->lock, flags);
/* unbind gadget driver */
- driver->unbind(&udc->gadget);
udc->gadget.dev.driver = NULL;
udc->driver = NULL;
@@ -1472,10 +1454,13 @@ static void mv_set_ptc(struct mv_udc *udc, u32 mode)
static void prime_status_complete(struct usb_ep *ep, struct usb_request *_req)
{
- struct mv_udc *udc = the_controller;
+ struct mv_ep *mvep = container_of(ep, struct mv_ep, ep);
struct mv_req *req = container_of(_req, struct mv_req, req);
+ struct mv_udc *udc;
unsigned long flags;
+ udc = mvep->udc;
+
dev_info(&udc->dev->dev, "switch to test mode %d\n", req->test_mode);
spin_lock_irqsave(&udc->lock, flags);
@@ -2123,16 +2108,20 @@ static void mv_udc_vbus_work(struct work_struct *work)
/* release device structure */
static void gadget_release(struct device *_dev)
{
- struct mv_udc *udc = the_controller;
+ struct mv_udc *udc;
+
+ udc = dev_get_drvdata(_dev);
complete(udc->done);
}
static int mv_udc_remove(struct platform_device *dev)
{
- struct mv_udc *udc = the_controller;
+ struct mv_udc *udc;
int clk_i;
+ udc = platform_get_drvdata(dev);
+
usb_del_gadget_udc(&udc->gadget);
if (udc->qwork) {
@@ -2183,8 +2172,6 @@ static int mv_udc_remove(struct platform_device *dev)
wait_for_completion(udc->done);
kfree(udc);
- the_controller = NULL;
-
return 0;
}
@@ -2209,7 +2196,6 @@ static int mv_udc_probe(struct platform_device *dev)
return -ENOMEM;
}
- the_controller = udc;
udc->done = &release_done;
udc->pdata = dev->dev.platform_data;
spin_lock_init(&udc->lock);
@@ -2400,6 +2386,7 @@ static int mv_udc_probe(struct platform_device *dev)
if (retval)
goto err_unregister;
+ platform_set_drvdata(dev, udc);
dev_info(&dev->dev, "successful probe UDC device %s clock gating.\n",
udc->clock_gating ? "with" : "without");
@@ -2431,15 +2418,16 @@ err_iounmap_capreg:
err_put_clk:
for (clk_i--; clk_i >= 0; clk_i--)
clk_put(udc->clk[clk_i]);
- the_controller = NULL;
kfree(udc);
return retval;
}
#ifdef CONFIG_PM
-static int mv_udc_suspend(struct device *_dev)
+static int mv_udc_suspend(struct device *dev)
{
- struct mv_udc *udc = the_controller;
+ struct mv_udc *udc;
+
+ udc = dev_get_drvdata(dev);
/* if OTG is enabled, the following will be done in OTG driver*/
if (!IS_ERR_OR_NULL(udc->transceiver))
@@ -2469,11 +2457,13 @@ static int mv_udc_suspend(struct device *_dev)
return 0;
}
-static int mv_udc_resume(struct device *_dev)
+static int mv_udc_resume(struct device *dev)
{
- struct mv_udc *udc = the_controller;
+ struct mv_udc *udc;
int retval;
+ udc = dev_get_drvdata(dev);
+
/* if OTG is enabled, the following will be done in OTG driver*/
if (!IS_ERR_OR_NULL(udc->transceiver))
return 0;
@@ -2501,9 +2491,10 @@ static const struct dev_pm_ops mv_udc_pm_ops = {
static void mv_udc_shutdown(struct platform_device *dev)
{
- struct mv_udc *udc = the_controller;
+ struct mv_udc *udc;
u32 mode;
+ udc = platform_get_drvdata(dev);
/* reset controller mode to IDLE */
mv_udc_enable(udc);
mode = readl(&udc->op_regs->usbmode);
--
1.7.4.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [V4 PATCH 02/26] usb: gadget: mv_udc: use devm_xxx for probe
2013-01-21 10:07 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Chao Xie
2013-01-21 10:07 ` [V4 PATCH 01/26] usb: gadget: mv_udc: use udc_start and udc_stop functions Chao Xie
@ 2013-01-21 10:07 ` Chao Xie
2013-01-21 10:07 ` [V4 PATCH 03/26] usb: gadget: mv_udc: fix the warning of mv_udc_remove Chao Xie
` (24 subsequent siblings)
26 siblings, 0 replies; 32+ messages in thread
From: Chao Xie @ 2013-01-21 10:07 UTC (permalink / raw)
To: linux-arm-kernel
use devm_xxx for udc driver probe. So we do need care about
the resources release in driver remove or failure handling
in driver probe.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
drivers/usb/gadget/mv_udc_core.c | 156 ++++++++++++++------------------------
1 files changed, 56 insertions(+), 100 deletions(-)
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index 32a9972..e2fdc8e 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -2115,12 +2115,11 @@ static void gadget_release(struct device *_dev)
complete(udc->done);
}
-static int mv_udc_remove(struct platform_device *dev)
+static int mv_udc_remove(struct platform_device *pdev)
{
struct mv_udc *udc;
- int clk_i;
- udc = platform_get_drvdata(dev);
+ udc = platform_get_drvdata(pdev);
usb_del_gadget_udc(&udc->gadget);
@@ -2129,55 +2128,27 @@ static int mv_udc_remove(struct platform_device *dev)
destroy_workqueue(udc->qwork);
}
- /*
- * If we have transceiver inited,
- * then vbus irq will not be requested in udc driver.
- */
- if (udc->pdata && udc->pdata->vbus
- && udc->clock_gating && IS_ERR_OR_NULL(udc->transceiver))
- free_irq(udc->pdata->vbus->irq, &dev->dev);
-
/* free memory allocated in probe */
if (udc->dtd_pool)
dma_pool_destroy(udc->dtd_pool);
if (udc->ep_dqh)
- dma_free_coherent(&dev->dev, udc->ep_dqh_size,
+ dma_free_coherent(&pdev->dev, udc->ep_dqh_size,
udc->ep_dqh, udc->ep_dqh_dma);
- kfree(udc->eps);
-
- if (udc->irq)
- free_irq(udc->irq, &dev->dev);
-
mv_udc_disable(udc);
- if (udc->cap_regs)
- iounmap(udc->cap_regs);
-
- if (udc->phy_regs)
- iounmap(udc->phy_regs);
-
- if (udc->status_req) {
- kfree(udc->status_req->req.buf);
- kfree(udc->status_req);
- }
-
- for (clk_i = 0; clk_i <= udc->clknum; clk_i++)
- clk_put(udc->clk[clk_i]);
-
device_unregister(&udc->gadget.dev);
/* free dev, wait for the release() finished */
wait_for_completion(udc->done);
- kfree(udc);
return 0;
}
-static int mv_udc_probe(struct platform_device *dev)
+static int mv_udc_probe(struct platform_device *pdev)
{
- struct mv_usb_platform_data *pdata = dev->dev.platform_data;
+ struct mv_usb_platform_data *pdata = pdev->dev.platform_data;
struct mv_udc *udc;
int retval = 0;
int clk_i = 0;
@@ -2185,70 +2156,68 @@ static int mv_udc_probe(struct platform_device *dev)
size_t size;
if (pdata == NULL) {
- dev_err(&dev->dev, "missing platform_data\n");
+ dev_err(&pdev->dev, "missing platform_data\n");
return -ENODEV;
}
size = sizeof(*udc) + sizeof(struct clk *) * pdata->clknum;
- udc = kzalloc(size, GFP_KERNEL);
+ udc = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
if (udc == NULL) {
- dev_err(&dev->dev, "failed to allocate memory for udc\n");
+ dev_err(&pdev->dev, "failed to allocate memory for udc\n");
return -ENOMEM;
}
udc->done = &release_done;
- udc->pdata = dev->dev.platform_data;
+ udc->pdata = pdev->dev.platform_data;
spin_lock_init(&udc->lock);
- udc->dev = dev;
+ udc->dev = pdev;
#ifdef CONFIG_USB_OTG_UTILS
if (pdata->mode == MV_USB_MODE_OTG)
- udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
+ udc->transceiver = devm_usb_get_phy(&pdev->dev,
+ USB_PHY_TYPE_USB2);
#endif
udc->clknum = pdata->clknum;
for (clk_i = 0; clk_i < udc->clknum; clk_i++) {
- udc->clk[clk_i] = clk_get(&dev->dev, pdata->clkname[clk_i]);
+ udc->clk[clk_i] = devm_clk_get(&pdev->dev,
+ pdata->clkname[clk_i]);
if (IS_ERR(udc->clk[clk_i])) {
retval = PTR_ERR(udc->clk[clk_i]);
- goto err_put_clk;
+ return retval;
}
}
r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "capregs");
if (r == NULL) {
- dev_err(&dev->dev, "no I/O memory resource defined\n");
- retval = -ENODEV;
- goto err_put_clk;
+ dev_err(&pdev->dev, "no I/O memory resource defined\n");
+ return -ENODEV;
}
udc->cap_regs = (struct mv_cap_regs __iomem *)
- ioremap(r->start, resource_size(r));
+ devm_ioremap(&pdev->dev, r->start, resource_size(r));
if (udc->cap_regs == NULL) {
- dev_err(&dev->dev, "failed to map I/O memory\n");
- retval = -EBUSY;
- goto err_put_clk;
+ dev_err(&pdev->dev, "failed to map I/O memory\n");
+ return -EBUSY;
}
r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "phyregs");
if (r == NULL) {
- dev_err(&dev->dev, "no phy I/O memory resource defined\n");
- retval = -ENODEV;
- goto err_iounmap_capreg;
+ dev_err(&pdev->dev, "no phy I/O memory resource defined\n");
+ return -ENODEV;
}
udc->phy_regs = ioremap(r->start, resource_size(r));
if (udc->phy_regs == NULL) {
- dev_err(&dev->dev, "failed to map phy I/O memory\n");
- retval = -EBUSY;
- goto err_iounmap_capreg;
+ dev_err(&pdev->dev, "failed to map phy I/O memory\n");
+ return -EBUSY;
}
/* we will acces controller register, so enable the clk */
retval = mv_udc_enable_internal(udc);
if (retval)
- goto err_iounmap_phyreg;
+ return retval;
udc->op_regs =
(struct mv_op_regs __iomem *)((unsigned long)udc->cap_regs
@@ -2265,11 +2234,11 @@ static int mv_udc_probe(struct platform_device *dev)
size = udc->max_eps * sizeof(struct mv_dqh) *2;
size = (size + DQH_ALIGNMENT - 1) & ~(DQH_ALIGNMENT - 1);
- udc->ep_dqh = dma_alloc_coherent(&dev->dev, size,
+ udc->ep_dqh = dma_alloc_coherent(&pdev->dev, size,
&udc->ep_dqh_dma, GFP_KERNEL);
if (udc->ep_dqh == NULL) {
- dev_err(&dev->dev, "allocate dQH memory failed\n");
+ dev_err(&pdev->dev, "allocate dQH memory failed\n");
retval = -ENOMEM;
goto err_disable_clock;
}
@@ -2277,7 +2246,7 @@ static int mv_udc_probe(struct platform_device *dev)
/* create dTD dma_pool resource */
udc->dtd_pool = dma_pool_create("mv_dtd",
- &dev->dev,
+ &pdev->dev,
sizeof(struct mv_dtd),
DTD_ALIGNMENT,
DMA_BOUNDARY);
@@ -2288,19 +2257,20 @@ static int mv_udc_probe(struct platform_device *dev)
}
size = udc->max_eps * sizeof(struct mv_ep) *2;
- udc->eps = kzalloc(size, GFP_KERNEL);
+ udc->eps = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
if (udc->eps == NULL) {
- dev_err(&dev->dev, "allocate ep memory failed\n");
+ dev_err(&pdev->dev, "allocate ep memory failed\n");
retval = -ENOMEM;
goto err_destroy_dma;
}
/* initialize ep0 status request structure */
- udc->status_req = kzalloc(sizeof(struct mv_req), GFP_KERNEL);
+ udc->status_req = devm_kzalloc(&pdev->dev, sizeof(struct mv_req),
+ GFP_KERNEL);
if (!udc->status_req) {
- dev_err(&dev->dev, "allocate status_req memory failed\n");
+ dev_err(&pdev->dev, "allocate status_req memory failed\n");
retval = -ENOMEM;
- goto err_free_eps;
+ goto err_destroy_dma;
}
INIT_LIST_HEAD(&udc->status_req->queue);
@@ -2315,17 +2285,17 @@ static int mv_udc_probe(struct platform_device *dev)
r = platform_get_resource(udc->dev, IORESOURCE_IRQ, 0);
if (r == NULL) {
- dev_err(&dev->dev, "no IRQ resource defined\n");
+ dev_err(&pdev->dev, "no IRQ resource defined\n");
retval = -ENODEV;
- goto err_free_status_req;
+ goto err_destroy_dma;
}
udc->irq = r->start;
- if (request_irq(udc->irq, mv_udc_irq,
+ if (devm_request_irq(&pdev->dev, udc->irq, mv_udc_irq,
IRQF_SHARED, driver_name, udc)) {
- dev_err(&dev->dev, "Request irq %d for UDC failed\n",
+ dev_err(&pdev->dev, "Request irq %d for UDC failed\n",
udc->irq);
retval = -ENODEV;
- goto err_free_status_req;
+ goto err_destroy_dma;
}
/* initialize gadget structure */
@@ -2337,14 +2307,14 @@ static int mv_udc_probe(struct platform_device *dev)
/* the "gadget" abstracts/virtualizes the controller */
dev_set_name(&udc->gadget.dev, "gadget");
- udc->gadget.dev.parent = &dev->dev;
- udc->gadget.dev.dma_mask = dev->dev.dma_mask;
+ udc->gadget.dev.parent = &pdev->dev;
+ udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
udc->gadget.dev.release = gadget_release;
udc->gadget.name = driver_name; /* gadget name */
retval = device_register(&udc->gadget.dev);
if (retval)
- goto err_free_irq;
+ goto err_destroy_dma;
eps_init(udc);
@@ -2353,10 +2323,11 @@ static int mv_udc_probe(struct platform_device *dev)
udc->clock_gating = 1;
else if (pdata->vbus) {
udc->clock_gating = 1;
- retval = request_threaded_irq(pdata->vbus->irq, NULL,
+ retval = devm_request_threaded_irq(&pdev->dev,
+ pdata->vbus->irq, NULL,
mv_udc_vbus_irq, IRQF_ONESHOT, "vbus", udc);
if (retval) {
- dev_info(&dev->dev,
+ dev_info(&pdev->dev,
"Can not request irq for VBUS, "
"disable clock gating\n");
udc->clock_gating = 0;
@@ -2364,7 +2335,7 @@ static int mv_udc_probe(struct platform_device *dev)
udc->qwork = create_singlethread_workqueue("mv_udc_queue");
if (!udc->qwork) {
- dev_err(&dev->dev, "cannot create workqueue\n");
+ dev_err(&pdev->dev, "cannot create workqueue\n");
retval = -ENOMEM;
goto err_unregister;
}
@@ -2382,43 +2353,28 @@ static int mv_udc_probe(struct platform_device *dev)
else
udc->vbus_active = 1;
- retval = usb_add_gadget_udc(&dev->dev, &udc->gadget);
+ retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
if (retval)
- goto err_unregister;
+ goto err_create_workqueue;
- platform_set_drvdata(dev, udc);
- dev_info(&dev->dev, "successful probe UDC device %s clock gating.\n",
+ platform_set_drvdata(pdev, udc);
+ dev_info(&pdev->dev, "successful probe UDC device %s clock gating.\n",
udc->clock_gating ? "with" : "without");
return 0;
+err_create_workqueue:
+ destroy_workqueue(udc->qwork);
err_unregister:
- if (udc->pdata && udc->pdata->vbus
- && udc->clock_gating && IS_ERR_OR_NULL(udc->transceiver))
- free_irq(pdata->vbus->irq, &dev->dev);
device_unregister(&udc->gadget.dev);
-err_free_irq:
- free_irq(udc->irq, &dev->dev);
-err_free_status_req:
- kfree(udc->status_req->req.buf);
- kfree(udc->status_req);
-err_free_eps:
- kfree(udc->eps);
err_destroy_dma:
dma_pool_destroy(udc->dtd_pool);
err_free_dma:
- dma_free_coherent(&dev->dev, udc->ep_dqh_size,
+ dma_free_coherent(&pdev->dev, udc->ep_dqh_size,
udc->ep_dqh, udc->ep_dqh_dma);
err_disable_clock:
mv_udc_disable_internal(udc);
-err_iounmap_phyreg:
- iounmap(udc->phy_regs);
-err_iounmap_capreg:
- iounmap(udc->cap_regs);
-err_put_clk:
- for (clk_i--; clk_i >= 0; clk_i--)
- clk_put(udc->clk[clk_i]);
- kfree(udc);
+
return retval;
}
@@ -2489,12 +2445,12 @@ static const struct dev_pm_ops mv_udc_pm_ops = {
};
#endif
-static void mv_udc_shutdown(struct platform_device *dev)
+static void mv_udc_shutdown(struct platform_device *pdev)
{
struct mv_udc *udc;
u32 mode;
- udc = platform_get_drvdata(dev);
+ udc = platform_get_drvdata(pdev);
/* reset controller mode to IDLE */
mv_udc_enable(udc);
mode = readl(&udc->op_regs->usbmode);
--
1.7.4.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [V4 PATCH 03/26] usb: gadget: mv_udc: fix the warning of mv_udc_remove
2013-01-21 10:07 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Chao Xie
2013-01-21 10:07 ` [V4 PATCH 01/26] usb: gadget: mv_udc: use udc_start and udc_stop functions Chao Xie
2013-01-21 10:07 ` [V4 PATCH 02/26] usb: gadget: mv_udc: use devm_xxx for probe Chao Xie
@ 2013-01-21 10:07 ` Chao Xie
2013-01-21 10:07 ` [V4 PATCH 04/26] usb: otg: mv_otg: use devm_xxx for probe Chao Xie
` (23 subsequent siblings)
26 siblings, 0 replies; 32+ messages in thread
From: Chao Xie @ 2013-01-21 10:07 UTC (permalink / raw)
To: linux-arm-kernel
The __exit_p() will be NULL if MODULE is no defined.
It will cause the warning. Removing __exit_p to remove
the warning.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
drivers/usb/gadget/mv_udc_core.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index e2fdc8e..910c4b5 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -2461,7 +2461,7 @@ static void mv_udc_shutdown(struct platform_device *pdev)
static struct platform_driver udc_driver = {
.probe = mv_udc_probe,
- .remove = __exit_p(mv_udc_remove),
+ .remove = mv_udc_remove,
.shutdown = mv_udc_shutdown,
.driver = {
.owner = THIS_MODULE,
--
1.7.4.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [V4 PATCH 04/26] usb: otg: mv_otg: use devm_xxx for probe
2013-01-21 10:07 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Chao Xie
` (2 preceding siblings ...)
2013-01-21 10:07 ` [V4 PATCH 03/26] usb: gadget: mv_udc: fix the warning of mv_udc_remove Chao Xie
@ 2013-01-21 10:07 ` Chao Xie
2013-01-21 10:07 ` [V4 PATCH 05/26] usb: host: ehci-mv: remove unused variable Chao Xie
` (22 subsequent siblings)
26 siblings, 0 replies; 32+ messages in thread
From: Chao Xie @ 2013-01-21 10:07 UTC (permalink / raw)
To: linux-arm-kernel
use devm_xxx for otg driver probe. So we do need care about
the resources release in driver remove or failure handling
in driver probe.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
drivers/usb/otg/mv_otg.c | 82 ++++++++++++---------------------------------
1 files changed, 22 insertions(+), 60 deletions(-)
diff --git a/drivers/usb/otg/mv_otg.c b/drivers/usb/otg/mv_otg.c
index eace975..da2d60c 100644
--- a/drivers/usb/otg/mv_otg.c
+++ b/drivers/usb/otg/mv_otg.c
@@ -662,18 +662,9 @@ static struct attribute_group inputs_attr_group = {
int mv_otg_remove(struct platform_device *pdev)
{
struct mv_otg *mvotg = platform_get_drvdata(pdev);
- int clk_i;
sysfs_remove_group(&mvotg->pdev->dev.kobj, &inputs_attr_group);
- if (mvotg->irq)
- free_irq(mvotg->irq, mvotg);
-
- if (mvotg->pdata->vbus)
- free_irq(mvotg->pdata->vbus->irq, mvotg);
- if (mvotg->pdata->id)
- free_irq(mvotg->pdata->id->irq, mvotg);
-
if (mvotg->qwork) {
flush_workqueue(mvotg->qwork);
destroy_workqueue(mvotg->qwork);
@@ -681,21 +672,9 @@ int mv_otg_remove(struct platform_device *pdev)
mv_otg_disable(mvotg);
- if (mvotg->cap_regs)
- iounmap(mvotg->cap_regs);
-
- if (mvotg->phy_regs)
- iounmap(mvotg->phy_regs);
-
- for (clk_i = 0; clk_i <= mvotg->clknum; clk_i++)
- clk_put(mvotg->clk[clk_i]);
-
usb_remove_phy(&mvotg->phy);
platform_set_drvdata(pdev, NULL);
- kfree(mvotg->phy.otg);
- kfree(mvotg);
-
return 0;
}
@@ -714,17 +693,15 @@ static int mv_otg_probe(struct platform_device *pdev)
}
size = sizeof(*mvotg) + sizeof(struct clk *) * pdata->clknum;
- mvotg = kzalloc(size, GFP_KERNEL);
+ mvotg = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
if (!mvotg) {
dev_err(&pdev->dev, "failed to allocate memory!\n");
return -ENOMEM;
}
- otg = kzalloc(sizeof *otg, GFP_KERNEL);
- if (!otg) {
- kfree(mvotg);
+ otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
+ if (!otg)
return -ENOMEM;
- }
platform_set_drvdata(pdev, mvotg);
@@ -733,18 +710,18 @@ static int mv_otg_probe(struct platform_device *pdev)
mvotg->clknum = pdata->clknum;
for (clk_i = 0; clk_i < mvotg->clknum; clk_i++) {
- mvotg->clk[clk_i] = clk_get(&pdev->dev, pdata->clkname[clk_i]);
+ mvotg->clk[clk_i] = devm_clk_get(&pdev->dev,
+ pdata->clkname[clk_i]);
if (IS_ERR(mvotg->clk[clk_i])) {
retval = PTR_ERR(mvotg->clk[clk_i]);
- goto err_put_clk;
+ return retval;
}
}
mvotg->qwork = create_singlethread_workqueue("mv_otg_queue");
if (!mvotg->qwork) {
dev_dbg(&pdev->dev, "cannot create workqueue for OTG\n");
- retval = -ENOMEM;
- goto err_put_clk;
+ return -ENOMEM;
}
INIT_DELAYED_WORK(&mvotg->work, mv_otg_work);
@@ -772,7 +749,7 @@ static int mv_otg_probe(struct platform_device *pdev)
goto err_destroy_workqueue;
}
- mvotg->phy_regs = ioremap(r->start, resource_size(r));
+ mvotg->phy_regs = devm_ioremap(&pdev->dev, r->start, resource_size(r));
if (mvotg->phy_regs == NULL) {
dev_err(&pdev->dev, "failed to map phy I/O memory\n");
retval = -EFAULT;
@@ -784,21 +761,21 @@ static int mv_otg_probe(struct platform_device *pdev)
if (r == NULL) {
dev_err(&pdev->dev, "no I/O memory resource defined\n");
retval = -ENODEV;
- goto err_unmap_phyreg;
+ goto err_destroy_workqueue;
}
- mvotg->cap_regs = ioremap(r->start, resource_size(r));
+ mvotg->cap_regs = devm_ioremap(&pdev->dev, r->start, resource_size(r));
if (mvotg->cap_regs == NULL) {
dev_err(&pdev->dev, "failed to map I/O memory\n");
retval = -EFAULT;
- goto err_unmap_phyreg;
+ goto err_destroy_workqueue;
}
/* we will acces controller register, so enable the udc controller */
retval = mv_otg_enable_internal(mvotg);
if (retval) {
dev_err(&pdev->dev, "mv otg enable error %d\n", retval);
- goto err_unmap_capreg;
+ goto err_destroy_workqueue;
}
mvotg->op_regs =
@@ -806,9 +783,9 @@ static int mv_otg_probe(struct platform_device *pdev)
+ (readl(mvotg->cap_regs) & CAPLENGTH_MASK));
if (pdata->id) {
- retval = request_threaded_irq(pdata->id->irq, NULL,
- mv_otg_inputs_irq,
- IRQF_ONESHOT, "id", mvotg);
+ retval = devm_request_threaded_irq(&pdev->dev, pdata->id->irq,
+ NULL, mv_otg_inputs_irq,
+ IRQF_ONESHOT, "id", mvotg);
if (retval) {
dev_info(&pdev->dev,
"Failed to request irq for ID\n");
@@ -818,9 +795,9 @@ static int mv_otg_probe(struct platform_device *pdev)
if (pdata->vbus) {
mvotg->clock_gating = 1;
- retval = request_threaded_irq(pdata->vbus->irq, NULL,
- mv_otg_inputs_irq,
- IRQF_ONESHOT, "vbus", mvotg);
+ retval = devm_request_threaded_irq(&pdev->dev, pdata->vbus->irq,
+ NULL, mv_otg_inputs_irq,
+ IRQF_ONESHOT, "vbus", mvotg);
if (retval) {
dev_info(&pdev->dev,
"Failed to request irq for VBUS, "
@@ -844,7 +821,7 @@ static int mv_otg_probe(struct platform_device *pdev)
}
mvotg->irq = r->start;
- if (request_irq(mvotg->irq, mv_otg_irq, IRQF_SHARED,
+ if (devm_request_irq(&pdev->dev, mvotg->irq, mv_otg_irq, IRQF_SHARED,
driver_name, mvotg)) {
dev_err(&pdev->dev, "Request irq %d for OTG failed\n",
mvotg->irq);
@@ -857,14 +834,14 @@ static int mv_otg_probe(struct platform_device *pdev)
if (retval < 0) {
dev_err(&pdev->dev, "can't register transceiver, %d\n",
retval);
- goto err_free_irq;
+ goto err_disable_clk;
}
retval = sysfs_create_group(&pdev->dev.kobj, &inputs_attr_group);
if (retval < 0) {
dev_dbg(&pdev->dev,
"Can't register sysfs attr group: %d\n", retval);
- goto err_set_transceiver;
+ goto err_remove_phy;
}
spin_lock_init(&mvotg->wq_lock);
@@ -879,30 +856,15 @@ static int mv_otg_probe(struct platform_device *pdev)
return 0;
-err_set_transceiver:
+err_remove_phy:
usb_remove_phy(&mvotg->phy);
-err_free_irq:
- free_irq(mvotg->irq, mvotg);
err_disable_clk:
- if (pdata->vbus)
- free_irq(pdata->vbus->irq, mvotg);
- if (pdata->id)
- free_irq(pdata->id->irq, mvotg);
mv_otg_disable_internal(mvotg);
-err_unmap_capreg:
- iounmap(mvotg->cap_regs);
-err_unmap_phyreg:
- iounmap(mvotg->phy_regs);
err_destroy_workqueue:
flush_workqueue(mvotg->qwork);
destroy_workqueue(mvotg->qwork);
-err_put_clk:
- for (clk_i--; clk_i >= 0; clk_i--)
- clk_put(mvotg->clk[clk_i]);
platform_set_drvdata(pdev, NULL);
- kfree(otg);
- kfree(mvotg);
return retval;
}
--
1.7.4.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [V4 PATCH 05/26] usb: host: ehci-mv: remove unused variable
2013-01-21 10:07 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Chao Xie
` (3 preceding siblings ...)
2013-01-21 10:07 ` [V4 PATCH 04/26] usb: otg: mv_otg: use devm_xxx for probe Chao Xie
@ 2013-01-21 10:07 ` Chao Xie
2013-01-21 10:07 ` [V4 PATCH 06/26] usb: gadget: mv_udc: fix the value of tranceiver Chao Xie
` (21 subsequent siblings)
26 siblings, 0 replies; 32+ messages in thread
From: Chao Xie @ 2013-01-21 10:07 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Chao Xie <chao.xie@marvell.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
---
drivers/usb/host/ehci-mv.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index 6c56297..3065809 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -302,7 +302,6 @@ static int mv_ehci_remove(struct platform_device *pdev)
{
struct ehci_hcd_mv *ehci_mv = platform_get_drvdata(pdev);
struct usb_hcd *hcd = ehci_mv->hcd;
- int clk_i;
if (hcd->rh_registered)
usb_remove_hcd(hcd);
--
1.7.4.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [V4 PATCH 06/26] usb: gadget: mv_udc: fix the value of tranceiver
2013-01-21 10:07 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Chao Xie
` (4 preceding siblings ...)
2013-01-21 10:07 ` [V4 PATCH 05/26] usb: host: ehci-mv: remove unused variable Chao Xie
@ 2013-01-21 10:07 ` Chao Xie
2013-01-21 10:07 ` [V4 PATCH 07/26] usb: gadget: mv_udc: make mv_udc depends on ARCH_MMP or ARCH_PXA Chao Xie
` (20 subsequent siblings)
26 siblings, 0 replies; 32+ messages in thread
From: Chao Xie @ 2013-01-21 10:07 UTC (permalink / raw)
To: linux-arm-kernel
usally we will use udc->tranceiver == NULL or
udc->tranceiver != NULL.
So when failed to get the udc->tranceiver by usb_get_phy(), we
directly set udc->tranceiver to be NULL.
Then the source code will not need macro IS_ERR_OR_NULL() for
udc->tranceiver judgement. It can reduce the line size and make
the judgement simple.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
drivers/usb/gadget/mv_udc_core.c | 15 ++++++++++-----
1 files changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index 910c4b5..c8cf959 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -1394,7 +1394,7 @@ static int mv_udc_start(struct usb_gadget *gadget,
spin_unlock_irqrestore(&udc->lock, flags);
- if (!IS_ERR_OR_NULL(udc->transceiver)) {
+ if (udc->transceiver) {
retval = otg_set_peripheral(udc->transceiver->otg,
&udc->gadget);
if (retval) {
@@ -2174,9 +2174,14 @@ static int mv_udc_probe(struct platform_device *pdev)
udc->dev = pdev;
#ifdef CONFIG_USB_OTG_UTILS
- if (pdata->mode == MV_USB_MODE_OTG)
+ if (pdata->mode == MV_USB_MODE_OTG) {
udc->transceiver = devm_usb_get_phy(&pdev->dev,
USB_PHY_TYPE_USB2);
+ if (IS_ERR_OR_NULL(udc->transceiver)) {
+ udc->transceiver = NULL;
+ return -ENODEV;
+ }
+ }
#endif
udc->clknum = pdata->clknum;
@@ -2319,7 +2324,7 @@ static int mv_udc_probe(struct platform_device *pdev)
eps_init(udc);
/* VBUS detect: we can disable/enable clock on demand.*/
- if (!IS_ERR_OR_NULL(udc->transceiver))
+ if (udc->transceiver)
udc->clock_gating = 1;
else if (pdata->vbus) {
udc->clock_gating = 1;
@@ -2386,7 +2391,7 @@ static int mv_udc_suspend(struct device *dev)
udc = dev_get_drvdata(dev);
/* if OTG is enabled, the following will be done in OTG driver*/
- if (!IS_ERR_OR_NULL(udc->transceiver))
+ if (udc->transceiver)
return 0;
if (udc->pdata->vbus && udc->pdata->vbus->poll)
@@ -2421,7 +2426,7 @@ static int mv_udc_resume(struct device *dev)
udc = dev_get_drvdata(dev);
/* if OTG is enabled, the following will be done in OTG driver*/
- if (!IS_ERR_OR_NULL(udc->transceiver))
+ if (udc->transceiver)
return 0;
if (!udc->clock_gating) {
--
1.7.4.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [V4 PATCH 07/26] usb: gadget: mv_udc: make mv_udc depends on ARCH_MMP or ARCH_PXA
2013-01-21 10:07 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Chao Xie
` (5 preceding siblings ...)
2013-01-21 10:07 ` [V4 PATCH 06/26] usb: gadget: mv_udc: fix the value of tranceiver Chao Xie
@ 2013-01-21 10:07 ` Chao Xie
2013-01-21 10:07 ` [V4 PATCH 08/26] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller Chao Xie
` (19 subsequent siblings)
26 siblings, 0 replies; 32+ messages in thread
From: Chao Xie @ 2013-01-21 10:07 UTC (permalink / raw)
To: linux-arm-kernel
Only ARCH_PXA and ARCH_MMP will use mv_udc.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
drivers/usb/gadget/Kconfig | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 14625fd..53943f7 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -319,6 +319,7 @@ config USB_S3C_HSUDC
config USB_MV_UDC
tristate "Marvell USB2.0 Device Controller"
+ depends on ARCH_PXA || ARCH_MMP
help
Marvell Socs (including PXA and MMP series) include a high speed
USB2.0 OTG controller, which can be configured as high speed or
--
1.7.4.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [V4 PATCH 08/26] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller
2013-01-21 10:07 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Chao Xie
` (6 preceding siblings ...)
2013-01-21 10:07 ` [V4 PATCH 07/26] usb: gadget: mv_udc: make mv_udc depends on ARCH_MMP or ARCH_PXA Chao Xie
@ 2013-01-21 10:07 ` Chao Xie
2013-01-21 10:07 ` [V4 PATCH 09/26] usb: gadget: mv_udc: use PHY driver for udc Chao Xie
` (18 subsequent siblings)
26 siblings, 0 replies; 32+ messages in thread
From: Chao Xie @ 2013-01-21 10:07 UTC (permalink / raw)
To: linux-arm-kernel
The PHY is seperated from usb controller.
The usb controller used in marvell pxa168/pxa910/mmp2 are same,
but PHY initialization may be different.
the usb controller can support udc/otg/ehci, and for each of
the mode, it need PHY to initialized before use the controller.
Direclty writing the phy driver will make the usb controller
driver to be simple and portable.
The PHY driver will be used by marvell udc/otg/ehci.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
drivers/usb/phy/Kconfig | 7 +
drivers/usb/phy/Makefile | 1 +
drivers/usb/phy/mv_usb2_phy.c | 454 ++++++++++++++++++++++++++++++++++
include/linux/platform_data/mv_usb.h | 9 +-
include/linux/usb/mv_usb2.h | 43 ++++
5 files changed, 511 insertions(+), 3 deletions(-)
create mode 100644 drivers/usb/phy/mv_usb2_phy.c
create mode 100644 include/linux/usb/mv_usb2.h
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 5de6e7f..7bfce04 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -45,3 +45,10 @@ config USB_RCAR_PHY
To compile this driver as a module, choose M here: the
module will be called rcar-phy.
+
+config MV_USB2_PHY
+ tristate "Marvell USB 2.0 PHY Driver"
+ depends on ARCH_PXA || ARCH_MMP
+ help
+ Enable this to support Marvell USB 2.0 phy driver for Marvell
+ SoC.
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 1a579a8..e33e09c 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_USB_ISP1301) += isp1301.o
obj-$(CONFIG_MV_U3D_PHY) += mv_u3d_phy.o
obj-$(CONFIG_USB_EHCI_TEGRA) += tegra_usb_phy.o
obj-$(CONFIG_USB_RCAR_PHY) += rcar-phy.o
+obj-$(CONFIG_MV_USB2_PHY) += mv_usb2_phy.o
diff --git a/drivers/usb/phy/mv_usb2_phy.c b/drivers/usb/phy/mv_usb2_phy.c
new file mode 100644
index 0000000..c2bccae
--- /dev/null
+++ b/drivers/usb/phy/mv_usb2_phy.c
@@ -0,0 +1,454 @@
+/*
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/resource.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/mv_usb.h>
+#include <linux/usb/mv_usb2.h>
+
+/* phy regs */
+#define UTMI_REVISION 0x0
+#define UTMI_CTRL 0x4
+#define UTMI_PLL 0x8
+#define UTMI_TX 0xc
+#define UTMI_RX 0x10
+#define UTMI_IVREF 0x14
+#define UTMI_T0 0x18
+#define UTMI_T1 0x1c
+#define UTMI_T2 0x20
+#define UTMI_T3 0x24
+#define UTMI_T4 0x28
+#define UTMI_T5 0x2c
+#define UTMI_RESERVE 0x30
+#define UTMI_USB_INT 0x34
+#define UTMI_DBG_CTL 0x38
+#define UTMI_OTG_ADDON 0x3c
+
+/* For UTMICTRL Register */
+#define UTMI_CTRL_USB_CLK_EN (1 << 31)
+/* pxa168 */
+#define UTMI_CTRL_SUSPEND_SET1 (1 << 30)
+#define UTMI_CTRL_SUSPEND_SET2 (1 << 29)
+#define UTMI_CTRL_RXBUF_PDWN (1 << 24)
+#define UTMI_CTRL_TXBUF_PDWN (1 << 11)
+
+#define UTMI_CTRL_INPKT_DELAY_SHIFT 30
+#define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT 28
+#define UTMI_CTRL_PU_REF_SHIFT 20
+#define UTMI_CTRL_ARC_PULLDN_SHIFT 12
+#define UTMI_CTRL_PLL_PWR_UP_SHIFT 1
+#define UTMI_CTRL_PWR_UP_SHIFT 0
+
+/* For UTMI_PLL Register */
+#define UTMI_PLL_PLLCALI12_SHIFT 29
+#define UTMI_PLL_PLLCALI12_MASK (0x3 << 29)
+
+#define UTMI_PLL_PLLVDD18_SHIFT 27
+#define UTMI_PLL_PLLVDD18_MASK (0x3 << 27)
+
+#define UTMI_PLL_PLLVDD12_SHIFT 25
+#define UTMI_PLL_PLLVDD12_MASK (0x3 << 25)
+
+#define UTMI_PLL_CLK_BLK_EN_SHIFT 24
+#define CLK_BLK_EN (0x1 << 24)
+#define PLL_READY (0x1 << 23)
+#define KVCO_EXT (0x1 << 22)
+#define VCOCAL_START (0x1 << 21)
+
+#define UTMI_PLL_KVCO_SHIFT 15
+#define UTMI_PLL_KVCO_MASK (0x7 << 15)
+
+#define UTMI_PLL_ICP_SHIFT 12
+#define UTMI_PLL_ICP_MASK (0x7 << 12)
+
+#define UTMI_PLL_FBDIV_SHIFT 4
+#define UTMI_PLL_FBDIV_MASK (0xFF << 4)
+
+#define UTMI_PLL_REFDIV_SHIFT 0
+#define UTMI_PLL_REFDIV_MASK (0xF << 0)
+
+/* For UTMI_TX Register */
+#define UTMI_TX_REG_EXT_FS_RCAL_SHIFT 27
+#define UTMI_TX_REG_EXT_FS_RCAL_MASK (0xf << 27)
+
+#define UTMI_TX_REG_EXT_FS_RCAL_EN_SHIFT 26
+#define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK (0x1 << 26)
+
+#define UTMI_TX_TXVDD12_SHIFT 22
+#define UTMI_TX_TXVDD12_MASK (0x3 << 22)
+
+#define UTMI_TX_CK60_PHSEL_SHIFT 17
+#define UTMI_TX_CK60_PHSEL_MASK (0xf << 17)
+
+#define UTMI_TX_IMPCAL_VTH_SHIFT 14
+#define UTMI_TX_IMPCAL_VTH_MASK (0x7 << 14)
+
+#define REG_RCAL_START (0x1 << 12)
+
+#define UTMI_TX_LOW_VDD_EN_SHIFT 11
+
+#define UTMI_TX_AMP_SHIFT 0
+#define UTMI_TX_AMP_MASK (0x7 << 0)
+
+/* For UTMI_RX Register */
+#define UTMI_REG_SQ_LENGTH_SHIFT 15
+#define UTMI_REG_SQ_LENGTH_MASK (0x3 << 15)
+
+#define UTMI_RX_SQ_THRESH_SHIFT 4
+#define UTMI_RX_SQ_THRESH_MASK (0xf << 4)
+
+#define UTMI_OTG_ADDON_OTG_ON (1 << 0)
+
+enum mv_usb2_phy_type {
+ PXA168_USB,
+ PXA910_USB,
+ MMP2_USB,
+};
+
+static struct mv_usb2_phy *the_phy;
+
+struct mv_usb2_phy *mv_usb2_get_phy(void)
+{
+ return the_phy;
+}
+EXPORT_SYMBOL(mv_usb2_get_phy);
+
+static unsigned int u2o_get(void __iomem *base, unsigned int offset)
+{
+ return readl(base + offset);
+}
+
+static void u2o_set(void __iomem *base, unsigned int offset,
+ unsigned int value)
+{
+ u32 reg;
+
+ reg = readl(base + offset);
+ reg |= value;
+ writel(reg, base + offset);
+ readl(base + offset);
+}
+
+static void u2o_clear(void __iomem *base, unsigned int offset,
+ unsigned int value)
+{
+ u32 reg;
+
+ reg = readl(base + offset);
+ reg &= ~value;
+ writel(reg, base + offset);
+ readl(base + offset);
+}
+
+static void u2o_write(void __iomem *base, unsigned int offset,
+ unsigned int value)
+{
+ writel(value, base + offset);
+ readl(base + offset);
+}
+
+static int _usb_phy_init(struct mv_usb2_phy *mv_phy)
+{
+ struct platform_device *pdev = mv_phy->pdev;
+ unsigned int loops = 0;
+ void __iomem *base = mv_phy->base;
+
+ dev_dbg(&pdev->dev, "phy init\n");
+
+ /* Initialize the USB PHY power */
+ if (mv_phy->type == PXA910_USB) {
+ u2o_set(base, UTMI_CTRL, (1<<UTMI_CTRL_INPKT_DELAY_SOF_SHIFT)
+ | (1<<UTMI_CTRL_PU_REF_SHIFT));
+ }
+
+ u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
+ u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
+
+ /* UTMI_PLL settings */
+ u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK
+ | UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK
+ | UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK
+ | UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK);
+
+ u2o_set(base, UTMI_PLL, 0xee<<UTMI_PLL_FBDIV_SHIFT
+ | 0xb<<UTMI_PLL_REFDIV_SHIFT | 3<<UTMI_PLL_PLLVDD18_SHIFT
+ | 3<<UTMI_PLL_PLLVDD12_SHIFT | 3<<UTMI_PLL_PLLCALI12_SHIFT
+ | 1<<UTMI_PLL_ICP_SHIFT | 3<<UTMI_PLL_KVCO_SHIFT);
+
+ /* UTMI_TX */
+ u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK
+ | UTMI_TX_TXVDD12_MASK | UTMI_TX_CK60_PHSEL_MASK
+ | UTMI_TX_IMPCAL_VTH_MASK | UTMI_TX_REG_EXT_FS_RCAL_MASK
+ | UTMI_TX_AMP_MASK);
+ u2o_set(base, UTMI_TX, 3<<UTMI_TX_TXVDD12_SHIFT
+ | 4<<UTMI_TX_CK60_PHSEL_SHIFT | 4<<UTMI_TX_IMPCAL_VTH_SHIFT
+ | 8<<UTMI_TX_REG_EXT_FS_RCAL_SHIFT | 3<<UTMI_TX_AMP_SHIFT);
+
+ /* UTMI_RX */
+ u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK
+ | UTMI_REG_SQ_LENGTH_MASK);
+ u2o_set(base, UTMI_RX, 7<<UTMI_RX_SQ_THRESH_SHIFT
+ | 2<<UTMI_REG_SQ_LENGTH_SHIFT);
+
+ /* UTMI_IVREF */
+ if (mv_phy->type == PXA168_USB)
+ /* fixing Microsoft Altair board interface with NEC hub issue -
+ * Set UTMI_IVREF from 0x4a3 to 0x4bf */
+ u2o_write(base, UTMI_IVREF, 0x4bf);
+
+ /* toggle VCOCAL_START bit of UTMI_PLL */
+ udelay(200);
+ u2o_set(base, UTMI_PLL, VCOCAL_START);
+ udelay(40);
+ u2o_clear(base, UTMI_PLL, VCOCAL_START);
+
+ /* toggle REG_RCAL_START bit of UTMI_TX */
+ udelay(400);
+ u2o_set(base, UTMI_TX, REG_RCAL_START);
+ udelay(40);
+ u2o_clear(base, UTMI_TX, REG_RCAL_START);
+ udelay(400);
+
+ /* Make sure PHY PLL is ready */
+ loops = 0;
+ while ((u2o_get(base, UTMI_PLL) & PLL_READY) == 0) {
+ mdelay(1);
+ loops++;
+ if (loops > 100) {
+ dev_warn(&pdev->dev, "calibrate timeout, UTMI_PLL %x\n",
+ u2o_get(base, UTMI_PLL));
+ break;
+ }
+ }
+
+ if (mv_phy->type == PXA168_USB) {
+ u2o_set(base, UTMI_RESERVE, 1 << 5);
+ /* Turn on UTMI PHY OTG extension */
+ u2o_write(base, UTMI_OTG_ADDON, 1);
+ }
+
+ return 0;
+}
+
+static int _usb_phy_shutdown(struct mv_usb2_phy *mv_phy)
+{
+ void __iomem *base = mv_phy->base;
+
+ if (mv_phy->type == PXA168_USB)
+ u2o_clear(base, UTMI_OTG_ADDON, UTMI_OTG_ADDON_OTG_ON);
+
+ u2o_clear(base, UTMI_CTRL, UTMI_CTRL_RXBUF_PDWN);
+ u2o_clear(base, UTMI_CTRL, UTMI_CTRL_TXBUF_PDWN);
+ u2o_clear(base, UTMI_CTRL, UTMI_CTRL_USB_CLK_EN);
+ u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
+ u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
+
+ return 0;
+}
+
+static int usb_phy_init(struct mv_usb2_phy *mv_phy)
+{
+ int i = 0;
+
+ mutex_lock(&mv_phy->phy_lock);
+ if (mv_phy->refcount++ == 0) {
+ for (i = 0; i < mv_phy->clks_num; i++)
+ clk_prepare_enable(mv_phy->clks[i]);
+ _usb_phy_init(mv_phy);
+ }
+ mutex_unlock(&mv_phy->phy_lock);
+ return 0;
+}
+
+static void usb_phy_shutdown(struct mv_usb2_phy *mv_phy)
+{
+ int i = 0;
+
+ mutex_lock(&mv_phy->phy_lock);
+ if (mv_phy->refcount++ == 0) {
+ _usb_phy_shutdown(mv_phy);
+ for (i = 0; i < mv_phy->clks_num; i++)
+ clk_disable_unprepare(mv_phy->clks[i]);
+ }
+ mutex_unlock(&mv_phy->phy_lock);
+}
+
+static struct of_device_id usb_phy_dt_ids[] = {
+ { .compatible = "mrvl,pxa168-usb-phy", .data = (void *)PXA168_USB},
+ { .compatible = "mrvl,pxa910-usb-phy", .data = (void *)PXA910_USB},
+ { .compatible = "mrvl,mmp2-usb-phy", .data = (void *)MMP2_USB},
+ {}
+};
+MODULE_DEVICE_TABLE(of, usb_phy_dt_ids);
+
+static int usb_phy_parse_dt(struct platform_device *pdev,
+ struct mv_usb2_phy *mv_phy)
+{
+ struct device_node *np = pdev->dev.of_node;
+ const struct of_device_id *of_id =
+ of_match_device(usb_phy_dt_ids, &pdev->dev);
+ unsigned int clks_num;
+ int i, ret;
+ const char *clk_name;
+
+ if (!np)
+ return 1;
+
+ clks_num = of_property_count_strings(np, "clocks");
+ if (clks_num < 0) {
+ dev_err(&pdev->dev, "failed to get clock number\n");
+ return clks_num;
+ }
+
+ mv_phy->clks = devm_kzalloc(&pdev->dev,
+ sizeof(struct clk *) * clks_num, GFP_KERNEL);
+ if (mv_phy->clks == NULL) {
+ dev_err(&pdev->dev,
+ "failed to allocate mempory for clocks");
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < clks_num; i++) {
+ ret = of_property_read_string_index(np, "clocks", i,
+ &clk_name);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to read clocks\n");
+ return ret;
+ }
+ mv_phy->clks[i] = devm_clk_get(&pdev->dev, clk_name);
+ if (IS_ERR(mv_phy->clks[i])) {
+ dev_err(&pdev->dev, "failed to get clock %s\n",
+ clk_name);
+ return PTR_ERR(mv_phy->clks[i]);
+ }
+ }
+
+ mv_phy->clks_num = clks_num;
+ mv_phy->type = (enum mv_usb2_phy_type)(of_id->data);
+
+ return 0;
+}
+
+static int usb_phy_probe(struct platform_device *pdev)
+{
+ struct mv_usb2_phy *mv_phy;
+ struct resource *r;
+ int ret, i;
+
+ mv_phy = devm_kzalloc(&pdev->dev, sizeof(*mv_phy), GFP_KERNEL);
+ if (mv_phy == NULL) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+ mutex_init(&mv_phy->phy_lock);
+
+ ret = usb_phy_parse_dt(pdev, mv_phy);
+ /* no CONFIG_OF */
+ if (ret > 0) {
+ struct mv_usb_phy_platform_data *pdata
+ = pdev->dev.platform_data;
+ const struct platform_device_id *id
+ = platform_get_device_id(pdev);
+
+ if (pdata == NULL || id == NULL) {
+ dev_err(&pdev->dev,
+ "missing platform_data or id_entry\n");
+ return -ENODEV;
+ }
+ mv_phy->type = (unsigned int)(id->driver_data);
+ mv_phy->clks_num = pdata->clknum;
+ mv_phy->clks = devm_kzalloc(&pdev->dev,
+ sizeof(struct clk *) * mv_phy->clks_num, GFP_KERNEL);
+ if (mv_phy->clks == NULL) {
+ dev_err(&pdev->dev,
+ "failed to allocate mempory for clocks");
+ return -ENOMEM;
+ }
+ for (i = 0; i < mv_phy->clks_num; i++)
+ mv_phy->clks[i] = devm_clk_get(&pdev->dev,
+ pdata->clkname[i]);
+ if (IS_ERR(mv_phy->clks[i])) {
+ dev_err(&pdev->dev, "failed to get clock %s\n",
+ pdata->clkname[i]);
+ return PTR_ERR(mv_phy->clks[i]);
+ }
+ } else if (ret < 0) {
+ dev_err(&pdev->dev, "error parse dt\n");
+ return ret;
+ }
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "no phy I/O memory resource defined\n");
+ return -ENODEV;
+ }
+ mv_phy->base = devm_ioremap(&pdev->dev, r->start, resource_size(r));
+ if (mv_phy->base == NULL) {
+ dev_err(&pdev->dev, "error map register base\n");
+ return -EBUSY;
+ }
+ platform_set_drvdata(pdev, mv_phy);
+ mv_phy->pdev = pdev;
+ mv_phy->init = usb_phy_init;
+ mv_phy->shutdown = usb_phy_shutdown;
+
+ platform_set_drvdata(pdev, mv_phy);
+
+ the_phy = mv_phy;
+
+ dev_info(&pdev->dev, "mv usb2 phy initialized\n");
+
+ return 0;
+}
+
+static int usb_phy_remove(struct platform_device *pdev)
+{
+ the_phy = NULL;
+
+ return 0;
+}
+
+static struct platform_device_id usb_phy_ids[] = {
+ { .name = "pxa168-usb-phy", .driver_data = PXA168_USB },
+ { .name = "pxa910-usb-phy", .driver_data = PXA910_USB },
+ { .name = "mmp2-usb-phy", .driver_data = MMP2_USB },
+ {}
+};
+
+static struct platform_driver usb_phy_driver = {
+ .probe = usb_phy_probe,
+ .remove = usb_phy_remove,
+ .driver = {
+ .name = "pxa168-usb-phy",
+ .of_match_table = usb_phy_dt_ids,
+ },
+ .id_table = usb_phy_ids,
+};
+
+static int __init mv_usb2_phy_init(void)
+{
+ return platform_driver_register(&usb_phy_driver);
+}
+arch_initcall(mv_usb2_phy_init);
diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h
index 944b01d..fd3d1b4 100644
--- a/include/linux/platform_data/mv_usb.h
+++ b/include/linux/platform_data/mv_usb.h
@@ -47,9 +47,12 @@ struct mv_usb_platform_data {
/* Force a_bus_req to be asserted */
unsigned int otg_force_a_bus_req:1;
- int (*phy_init)(void __iomem *regbase);
- void (*phy_deinit)(void __iomem *regbase);
int (*set_vbus)(unsigned int vbus);
- int (*private_init)(void __iomem *opregs, void __iomem *phyregs);
};
+
+struct mv_usb_phy_platform_data {
+ unsigned int clknum;
+ char **clkname;
+};
+
#endif
diff --git a/include/linux/usb/mv_usb2.h b/include/linux/usb/mv_usb2.h
new file mode 100644
index 0000000..9744a97
--- /dev/null
+++ b/include/linux/usb/mv_usb2.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2012 Marvell Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MV_USB2_H
+#define __MV_USB2_H
+
+#include <linux/clk.h>
+
+struct mv_usb2_phy {
+ struct platform_device *pdev;
+ struct mutex phy_lock;
+ unsigned int refcount;
+ unsigned int type;
+ void __iomem *base;
+ struct clk **clks;
+ unsigned int clks_num;
+
+ int (*init)(struct mv_usb2_phy *mv_phy);
+ void (*shutdown)(struct mv_usb2_phy *mv_phy);
+};
+
+#if defined(CONFIG_MV_USB2_PHY) || defined(CONFIG_MV_USB2_PHY_MODULE)
+
+extern struct mv_usb2_phy *mv_usb2_get_phy(void);
+
+#else
+
+struct mv_usb2_phy *mv_usb2_get_phy(void) { return NULL; }
+
+#endif
+
+#endif
--
1.7.4.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [V4 PATCH 09/26] usb: gadget: mv_udc: use PHY driver for udc
2013-01-21 10:07 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Chao Xie
` (7 preceding siblings ...)
2013-01-21 10:07 ` [V4 PATCH 08/26] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller Chao Xie
@ 2013-01-21 10:07 ` Chao Xie
2013-01-21 10:07 ` [V4 PATCH 10/26] usb: ehci: ehci-mv: use PHY driver for ehci Chao Xie
` (17 subsequent siblings)
26 siblings, 0 replies; 32+ messages in thread
From: Chao Xie @ 2013-01-21 10:07 UTC (permalink / raw)
To: linux-arm-kernel
Originaly, udc driver will call the callbacks in platform data
for PHY initialization and shut down.
With PHY driver, it will call the APIs provided by PHY driver
for PHY initialization and shut down. It removes the callbacks
in platform data, and at same time it removes one block in the
way of enabling device tree for udc driver.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
drivers/usb/gadget/mv_udc.h | 2 +-
drivers/usb/gadget/mv_udc_core.c | 23 ++++++++---------------
2 files changed, 9 insertions(+), 16 deletions(-)
diff --git a/drivers/usb/gadget/mv_udc.h b/drivers/usb/gadget/mv_udc.h
index 9073436..4851b2b 100644
--- a/drivers/usb/gadget/mv_udc.h
+++ b/drivers/usb/gadget/mv_udc.h
@@ -180,7 +180,6 @@ struct mv_udc {
struct mv_cap_regs __iomem *cap_regs;
struct mv_op_regs __iomem *op_regs;
- void __iomem *phy_regs;
unsigned int max_eps;
struct mv_dqh *ep_dqh;
size_t ep_dqh_size;
@@ -217,6 +216,7 @@ struct mv_udc {
struct work_struct vbus_work;
struct workqueue_struct *qwork;
+ struct mv_usb2_phy *phy;
struct usb_phy *transceiver;
struct mv_usb_platform_data *pdata;
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index c8cf959..76fcfc7 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -35,6 +35,7 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/platform_data/mv_usb.h>
+#include <linux/usb/mv_usb2.h>
#include <asm/unaligned.h>
#include "mv_udc.h"
@@ -1121,8 +1122,8 @@ static int mv_udc_enable_internal(struct mv_udc *udc)
dev_dbg(&udc->dev->dev, "enable udc\n");
udc_clock_enable(udc);
- if (udc->pdata->phy_init) {
- retval = udc->pdata->phy_init(udc->phy_regs);
+ if (udc->phy->init) {
+ retval = udc->phy->init(udc->phy);
if (retval) {
dev_err(&udc->dev->dev,
"init phy error %d\n", retval);
@@ -1147,8 +1148,8 @@ static void mv_udc_disable_internal(struct mv_udc *udc)
{
if (udc->active) {
dev_dbg(&udc->dev->dev, "disable udc\n");
- if (udc->pdata->phy_deinit)
- udc->pdata->phy_deinit(udc->phy_regs);
+ if (udc->phy->shutdown)
+ udc->phy->shutdown(udc->phy);
udc_clock_disable(udc);
udc->active = 0;
}
@@ -2194,7 +2195,7 @@ static int mv_udc_probe(struct platform_device *pdev)
}
}
- r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "capregs");
+ r = platform_get_resource(udc->dev, IORESOURCE_MEM, 0);
if (r == NULL) {
dev_err(&pdev->dev, "no I/O memory resource defined\n");
return -ENODEV;
@@ -2207,17 +2208,9 @@ static int mv_udc_probe(struct platform_device *pdev)
return -EBUSY;
}
- r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "phyregs");
- if (r == NULL) {
- dev_err(&pdev->dev, "no phy I/O memory resource defined\n");
+ udc->phy = mv_usb2_get_phy();
+ if (udc->phy == NULL)
return -ENODEV;
- }
-
- udc->phy_regs = ioremap(r->start, resource_size(r));
- if (udc->phy_regs == NULL) {
- dev_err(&pdev->dev, "failed to map phy I/O memory\n");
- return -EBUSY;
- }
/* we will acces controller register, so enable the clk */
retval = mv_udc_enable_internal(udc);
--
1.7.4.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [V4 PATCH 10/26] usb: ehci: ehci-mv: use PHY driver for ehci
2013-01-21 10:07 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Chao Xie
` (8 preceding siblings ...)
2013-01-21 10:07 ` [V4 PATCH 09/26] usb: gadget: mv_udc: use PHY driver for udc Chao Xie
@ 2013-01-21 10:07 ` Chao Xie
2013-01-21 10:07 ` [V4 PATCH 11/26] usb: otg: mv_otg: use PHY driver for otg Chao Xie
` (16 subsequent siblings)
26 siblings, 0 replies; 32+ messages in thread
From: Chao Xie @ 2013-01-21 10:07 UTC (permalink / raw)
To: linux-arm-kernel
Originaly, ehci driver will call the callbacks in platform data
for PHY initialization and shut down.
With PHY driver, it will call the APIs provided by PHY driver
for PHY initialization and shut down. It removes the callbacks
in platform data, and at same time it removes one block in the
way of enabling device tree for ehci driver.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
---
drivers/usb/host/ehci-mv.c | 37 +++++++++++++------------------------
1 files changed, 13 insertions(+), 24 deletions(-)
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index 3065809..be504fd 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -15,17 +15,18 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/usb/otg.h>
+#include <linux/usb/mv_usb2.h>
#include <linux/platform_data/mv_usb.h>
#define CAPLENGTH_MASK (0xff)
struct ehci_hcd_mv {
struct usb_hcd *hcd;
+ struct mv_usb2_phy *mvphy;
/* Which mode does this ehci running OTG/Host ? */
int mode;
- void __iomem *phy_regs;
void __iomem *cap_regs;
void __iomem *op_regs;
@@ -59,8 +60,8 @@ static int mv_ehci_enable(struct ehci_hcd_mv *ehci_mv)
int retval;
ehci_clock_enable(ehci_mv);
- if (ehci_mv->pdata->phy_init) {
- retval = ehci_mv->pdata->phy_init(ehci_mv->phy_regs);
+ if (ehci_mv->mvphy->init) {
+ retval = ehci_mv->mvphy->init(ehci_mv->mvphy);
if (retval)
return retval;
}
@@ -70,8 +71,8 @@ static int mv_ehci_enable(struct ehci_hcd_mv *ehci_mv)
static void mv_ehci_disable(struct ehci_hcd_mv *ehci_mv)
{
- if (ehci_mv->pdata->phy_deinit)
- ehci_mv->pdata->phy_deinit(ehci_mv->phy_regs);
+ if (ehci_mv->mvphy->shutdown)
+ ehci_mv->mvphy->shutdown(ehci_mv->mvphy);
ehci_clock_disable(ehci_mv);
}
@@ -184,22 +185,7 @@ static int mv_ehci_probe(struct platform_device *pdev)
}
}
- r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phyregs");
- if (r == NULL) {
- dev_err(&pdev->dev, "no phy I/O memory resource defined\n");
- retval = -ENODEV;
- goto err_clear_drvdata;
- }
-
- ehci_mv->phy_regs = devm_ioremap(&pdev->dev, r->start,
- resource_size(r));
- if (ehci_mv->phy_regs == 0) {
- dev_err(&pdev->dev, "failed to map phy I/O memory\n");
- retval = -EFAULT;
- goto err_clear_drvdata;
- }
-
- r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "capregs");
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!r) {
dev_err(&pdev->dev, "no I/O memory resource defined\n");
retval = -ENODEV;
@@ -214,6 +200,12 @@ static int mv_ehci_probe(struct platform_device *pdev)
goto err_clear_drvdata;
}
+ ehci_mv->mvphy = mv_usb2_get_phy();
+ if (ehci_mv->mvphy == NULL) {
+ retval = -ENODEV;
+ goto err_clear_drvdata;
+ }
+
retval = mv_ehci_enable(ehci_mv);
if (retval) {
dev_err(&pdev->dev, "init phy error %d\n", retval);
@@ -275,9 +267,6 @@ static int mv_ehci_probe(struct platform_device *pdev)
}
}
- if (pdata->private_init)
- pdata->private_init(ehci_mv->op_regs, ehci_mv->phy_regs);
-
dev_info(&pdev->dev,
"successful find EHCI device with regs 0x%p irq %d"
" working in %s mode\n", hcd->regs, hcd->irq,
--
1.7.4.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [V4 PATCH 11/26] usb: otg: mv_otg: use PHY driver for otg
2013-01-21 10:07 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Chao Xie
` (9 preceding siblings ...)
2013-01-21 10:07 ` [V4 PATCH 10/26] usb: ehci: ehci-mv: use PHY driver for ehci Chao Xie
@ 2013-01-21 10:07 ` Chao Xie
2013-01-21 10:07 ` [V4 PATCH 12/26] arm: mmp2: change the defintion of usb devices Chao Xie
` (15 subsequent siblings)
26 siblings, 0 replies; 32+ messages in thread
From: Chao Xie @ 2013-01-21 10:07 UTC (permalink / raw)
To: linux-arm-kernel
Originaly, otg driver will call the callbacks in platform data
for PHY initialization and shut down.
With PHY driver, it will call the APIs provided by PHY driver
for PHY initialization and shut down. It removes the callbacks
in platform data, and at same time it removes one block in the
way of enabling device tree for otg driver.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
drivers/usb/otg/mv_otg.c | 33 ++++++++++++---------------------
drivers/usb/otg/mv_otg.h | 2 +-
2 files changed, 13 insertions(+), 22 deletions(-)
diff --git a/drivers/usb/otg/mv_otg.c b/drivers/usb/otg/mv_otg.c
index da2d60c..cc45ef2 100644
--- a/drivers/usb/otg/mv_otg.c
+++ b/drivers/usb/otg/mv_otg.c
@@ -25,6 +25,7 @@
#include <linux/usb/otg.h>
#include <linux/usb/gadget.h>
#include <linux/usb/hcd.h>
+#include <linux/usb/mv_usb2.h>
#include <linux/platform_data/mv_usb.h>
#include "mv_otg.h"
@@ -261,8 +262,8 @@ static int mv_otg_enable_internal(struct mv_otg *mvotg)
dev_dbg(&mvotg->pdev->dev, "otg enabled\n");
otg_clock_enable(mvotg);
- if (mvotg->pdata->phy_init) {
- retval = mvotg->pdata->phy_init(mvotg->phy_regs);
+ if (mvotg->mvphy->init) {
+ retval = mvotg->mvphy->init(mvotg->mvphy);
if (retval) {
dev_err(&mvotg->pdev->dev,
"init phy error %d\n", retval);
@@ -288,8 +289,8 @@ static void mv_otg_disable_internal(struct mv_otg *mvotg)
{
if (mvotg->active) {
dev_dbg(&mvotg->pdev->dev, "otg disabled\n");
- if (mvotg->pdata->phy_deinit)
- mvotg->pdata->phy_deinit(mvotg->phy_regs);
+ if (mvotg->mvphy->shutdown)
+ mvotg->mvphy->shutdown(mvotg->mvphy);
otg_clock_disable(mvotg);
mvotg->active = 0;
}
@@ -741,23 +742,8 @@ static int mv_otg_probe(struct platform_device *pdev)
for (i = 0; i < OTG_TIMER_NUM; i++)
init_timer(&mvotg->otg_ctrl.timer[i]);
- r = platform_get_resource_byname(mvotg->pdev,
- IORESOURCE_MEM, "phyregs");
- if (r == NULL) {
- dev_err(&pdev->dev, "no phy I/O memory resource defined\n");
- retval = -ENODEV;
- goto err_destroy_workqueue;
- }
-
- mvotg->phy_regs = devm_ioremap(&pdev->dev, r->start, resource_size(r));
- if (mvotg->phy_regs == NULL) {
- dev_err(&pdev->dev, "failed to map phy I/O memory\n");
- retval = -EFAULT;
- goto err_destroy_workqueue;
- }
-
- r = platform_get_resource_byname(mvotg->pdev,
- IORESOURCE_MEM, "capregs");
+ r = platform_get_resource(mvotg->pdev,
+ IORESOURCE_MEM, 0);
if (r == NULL) {
dev_err(&pdev->dev, "no I/O memory resource defined\n");
retval = -ENODEV;
@@ -770,6 +756,11 @@ static int mv_otg_probe(struct platform_device *pdev)
retval = -EFAULT;
goto err_destroy_workqueue;
}
+ mvotg->mvphy = mv_usb2_get_phy();
+ if (mvotg->mvphy == NULL) {
+ retval = -ENODEV;
+ goto err_destroy_workqueue;
+ }
/* we will acces controller register, so enable the udc controller */
retval = mv_otg_enable_internal(mvotg);
diff --git a/drivers/usb/otg/mv_otg.h b/drivers/usb/otg/mv_otg.h
index 8a9e351..7b9629a 100644
--- a/drivers/usb/otg/mv_otg.h
+++ b/drivers/usb/otg/mv_otg.h
@@ -137,10 +137,10 @@ struct mv_otg_regs {
struct mv_otg {
struct usb_phy phy;
+ struct mv_usb2_phy *mvphy;
struct mv_otg_ctrl otg_ctrl;
/* base address */
- void __iomem *phy_regs;
void __iomem *cap_regs;
struct mv_otg_regs __iomem *op_regs;
--
1.7.4.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [V4 PATCH 12/26] arm: mmp2: change the defintion of usb devices
2013-01-21 10:07 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Chao Xie
` (10 preceding siblings ...)
2013-01-21 10:07 ` [V4 PATCH 11/26] usb: otg: mv_otg: use PHY driver for otg Chao Xie
@ 2013-01-21 10:07 ` Chao Xie
2013-01-21 10:07 ` [V4 PATCH 13/26] arm: pxa910: " Chao Xie
` (14 subsequent siblings)
26 siblings, 0 replies; 32+ messages in thread
From: Chao Xie @ 2013-01-21 10:07 UTC (permalink / raw)
To: linux-arm-kernel
add the udc/otg/ehci devices for mmp2
Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
arch/arm/mach-mmp/include/mach/mmp2.h | 4 ++++
arch/arm/mach-mmp/mmp2.c | 4 ++++
2 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h
index c4ca4d1..58e96b0 100644
--- a/arch/arm/mach-mmp/include/mach/mmp2.h
+++ b/arch/arm/mach-mmp/include/mach/mmp2.h
@@ -31,6 +31,10 @@ extern struct pxa_device_desc mmp2_device_sdh2;
extern struct pxa_device_desc mmp2_device_sdh3;
extern struct pxa_device_desc mmp2_device_asram;
extern struct pxa_device_desc mmp2_device_isram;
+extern struct pxa_device_desc mmp2_device_u2o;
+extern struct pxa_device_desc mmp2_device_u2ootg;
+extern struct pxa_device_desc mmp2_device_u2oehci;
+extern struct pxa_device_desc mmp2_device_u2ophy;
extern struct platform_device mmp2_device_gpio;
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index 3a3768c..73edbfc 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -153,6 +153,10 @@ MMP2_DEVICE(sdh3, "sdhci-pxav3", 3, MMC4, 0xd4281800, 0x120);
MMP2_DEVICE(asram, "asram", -1, NONE, 0xe0000000, 0x4000);
/* 0xd1000000 ~ 0xd101ffff is reserved for secure processor */
MMP2_DEVICE(isram, "isram", -1, NONE, 0xd1020000, 0x18000);
+MMP2_DEVICE(u2ophy, "mmp2-usb-phy", -1, NONE, 0xd4207000, 0x1ff);
+MMP2_DEVICE(u2o, "mv-udc", -1, USB_OTG, 0xd4208100, 0x1ff);
+MMP2_DEVICE(u2ootg, "mv-otg", -1, USB_OTG, 0xd4208100, 0x1ff);
+MMP2_DEVICE(u2oehci, "mv-ehci", -1, USB_OTG, 0xd4208100, 0x1ff);
struct resource mmp2_resource_gpio[] = {
{
--
1.7.4.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [V4 PATCH 13/26] arm: pxa910: change the defintion of usb devices
2013-01-21 10:07 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Chao Xie
` (11 preceding siblings ...)
2013-01-21 10:07 ` [V4 PATCH 12/26] arm: mmp2: change the defintion of usb devices Chao Xie
@ 2013-01-21 10:07 ` Chao Xie
2013-01-21 10:07 ` [V4 PATCH 14/26] arm: brownstone: add usb support for the board Chao Xie
` (13 subsequent siblings)
26 siblings, 0 replies; 32+ messages in thread
From: Chao Xie @ 2013-01-21 10:07 UTC (permalink / raw)
To: linux-arm-kernel
because phy is seperated from the usb controller driver,
we can use the common pxa_device_desc for device register.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
arch/arm/mach-mmp/include/mach/pxa910.h | 7 ++++---
arch/arm/mach-mmp/pxa910.c | 4 ++++
2 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index 3b58a3b..26ea4fe 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -20,9 +20,10 @@ extern struct pxa_device_desc pxa910_device_pwm2;
extern struct pxa_device_desc pxa910_device_pwm3;
extern struct pxa_device_desc pxa910_device_pwm4;
extern struct pxa_device_desc pxa910_device_nand;
-extern struct platform_device pxa168_device_u2o;
-extern struct platform_device pxa168_device_u2ootg;
-extern struct platform_device pxa168_device_u2oehci;
+extern struct pxa_device_desc pxa910_device_u2o;
+extern struct pxa_device_desc pxa910_device_u2ootg;
+extern struct pxa_device_desc pxa910_device_u2oehci;
+extern struct pxa_device_desc pxa910_device_u2ophy;
extern struct platform_device pxa910_device_gpio;
extern struct platform_device pxa910_device_rtc;
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 8b1e16f..65174f7 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -138,6 +138,10 @@ PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
+PXA910_DEVICE(u2ophy, "pxa910-usb-phy", -1, NONE, 0xd4207000, 0x1ff);
+PXA910_DEVICE(u2o, "mv-udc", -1, USB1, 0xd4208100, 0x1ff);
+PXA910_DEVICE(u2ootg, "mv-otg", -1, USB1, 0xd4208100, 0x1ff);
+PXA910_DEVICE(u2oehci, "mv-ehci", -1, USB1, 0xd4208100, 0x1ff);
struct resource pxa910_resource_gpio[] = {
{
--
1.7.4.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [V4 PATCH 14/26] arm: brownstone: add usb support for the board
2013-01-21 10:07 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Chao Xie
` (12 preceding siblings ...)
2013-01-21 10:07 ` [V4 PATCH 13/26] arm: pxa910: " Chao Xie
@ 2013-01-21 10:07 ` Chao Xie
2013-01-21 10:07 ` [V4 PATCH 15/26] arm: ttc_dkb: add usb support Chao Xie
` (12 subsequent siblings)
26 siblings, 0 replies; 32+ messages in thread
From: Chao Xie @ 2013-01-21 10:07 UTC (permalink / raw)
To: linux-arm-kernel
for brownstone board, add the udc/otg/ehci support
Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
arch/arm/mach-mmp/brownstone.c | 47 ++++++++++++++++++++++++++++++++++++++++
1 files changed, 47 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index 5cb769c..90c0340 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -18,6 +18,7 @@
#include <linux/regulator/max8649.h>
#include <linux/regulator/fixed.h>
#include <linux/mfd/max8925.h>
+#include <linux/platform_data/mv_usb.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -195,6 +196,31 @@ static struct sram_platdata mmp2_isram_platdata = {
.granularity = SRAM_GRANULARITY,
};
+#ifdef CONFIG_USB_SUPPORT
+
+static char *mmp2_usb_clock_name[] = {
+ [0] = "usb_clk",
+};
+
+static struct mv_usb_phy_platform_data brownstone_usb_phy_pdata = {
+ .clknum = 1,
+ .clkname = mmp2_usb_clock_name,
+};
+
+#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV_U2O)
+
+static struct mv_usb_platform_data brownstone_usb_pdata = {
+ .clknum = 1,
+ .clkname = mmp2_usb_clock_name,
+ .vbus = NULL,
+ .mode = MV_USB_MODE_OTG,
+ .otg_force_a_bus_req = 1,
+ .set_vbus = NULL,
+};
+#endif
+#endif
+
+
static void __init brownstone_init(void)
{
mfp_config(ARRAY_AND_SIZE(brownstone_pin_config));
@@ -211,6 +237,27 @@ static void __init brownstone_init(void)
/* enable 5v regulator */
platform_device_register(&brownstone_v_5vp_device);
+
+#ifdef CONFIG_USB_SUPPORT
+ pxa_register_device(&mmp2_device_u2ophy, &brownstone_usb_phy_pdata,
+ sizeof(brownstone_usb_phy_pdata));
+#endif
+
+#ifdef CONFIG_USB_MV_UDC
+ pxa_register_device(&mmp2_device_u2o, &brownstone_usb_pdata,
+ sizeof(brownstone_usb_pdata));
+#endif
+
+#ifdef CONFIG_USB_EHCI_MV_U2O
+ pxa_register_device(&mmp2_device_u2oehci, &brownstone_usb_pdata,
+ sizeof(brownstone_usb_pdata));
+#endif
+
+#ifdef CONFIG_USB_MV_OTG
+ pxa_register_device(&mmp2_device_u2ootg, &brownstone_usb_pdata,
+ sizeof(brownstone_usb_pdata));
+#endif
+
}
MACHINE_START(BROWNSTONE, "Brownstone Development Platform")
--
1.7.4.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [V4 PATCH 15/26] arm: ttc_dkb: add usb support
2013-01-21 10:07 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Chao Xie
` (13 preceding siblings ...)
2013-01-21 10:07 ` [V4 PATCH 14/26] arm: brownstone: add usb support for the board Chao Xie
@ 2013-01-21 10:07 ` Chao Xie
2013-01-21 10:07 ` [V4 PATCH 16/26] arm: mmp: remove the usb phy setting Chao Xie
` (11 subsequent siblings)
26 siblings, 0 replies; 32+ messages in thread
From: Chao Xie @ 2013-01-21 10:07 UTC (permalink / raw)
To: linux-arm-kernel
for ttc_dkb board, add udc/otg/ehci support
Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
arch/arm/mach-mmp/ttc_dkb.c | 30 +++++++++++++++++++-----------
1 files changed, 19 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index ce55fd8..0962791 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -27,7 +27,6 @@
#include <mach/mfp-pxa910.h>
#include <mach/pxa910.h>
#include <mach/irqs.h>
-#include <mach/regs-usb.h>
#include "common.h"
@@ -158,20 +157,24 @@ static struct i2c_board_info ttc_dkb_i2c_info[] = {
};
#ifdef CONFIG_USB_SUPPORT
-#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV_U2O)
static char *pxa910_usb_clock_name[] = {
- [0] = "U2OCLK",
+ [0] = "usb_clk",
+};
+
+static struct mv_usb_phy_platform_data ttc_usb_phy_pdata = {
+ .clknum = 1,
+ .clkname = pxa910_usb_clock_name,
};
+#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV_U2O)
+
static struct mv_usb_platform_data ttc_usb_pdata = {
.clknum = 1,
.clkname = pxa910_usb_clock_name,
.vbus = NULL,
.mode = MV_USB_MODE_OTG,
.otg_force_a_bus_req = 1,
- .phy_init = pxa_usb_phy_init,
- .phy_deinit = pxa_usb_phy_deinit,
.set_vbus = NULL,
};
#endif
@@ -198,19 +201,24 @@ static void __init ttc_dkb_init(void)
pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info));
platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
+#ifdef CONFIG_USB_SUPPORT
+ pxa_register_device(&pxa910_device_u2ophy, &ttc_usb_phy_pdata,
+ sizeof(ttc_usb_phy_pdata));
+#endif
+
#ifdef CONFIG_USB_MV_UDC
- pxa168_device_u2o.dev.platform_data = &ttc_usb_pdata;
- platform_device_register(&pxa168_device_u2o);
+ pxa_register_device(&pxa910_device_u2o, &ttc_usb_pdata,
+ sizeof(ttc_usb_pdata));
#endif
#ifdef CONFIG_USB_EHCI_MV_U2O
- pxa168_device_u2oehci.dev.platform_data = &ttc_usb_pdata;
- platform_device_register(&pxa168_device_u2oehci);
+ pxa_register_device(&pxa910_device_u2oehci, &ttc_usb_pdata,
+ sizeof(ttc_usb_pdata));
#endif
#ifdef CONFIG_USB_MV_OTG
- pxa168_device_u2ootg.dev.platform_data = &ttc_usb_pdata;
- platform_device_register(&pxa168_device_u2ootg);
+ pxa_register_device(&pxa910_device_u2ootg, &ttc_usb_pdata,
+ sizeof(ttc_usb_pdata));
#endif
}
--
1.7.4.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [V4 PATCH 16/26] arm: mmp: remove the usb phy setting
2013-01-21 10:07 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Chao Xie
` (14 preceding siblings ...)
2013-01-21 10:07 ` [V4 PATCH 15/26] arm: ttc_dkb: add usb support Chao Xie
@ 2013-01-21 10:07 ` Chao Xie
2013-01-21 10:07 ` [V4 PATCH 17/26] arm: mmp: remove usb devices from pxa168 Chao Xie
` (10 subsequent siblings)
26 siblings, 0 replies; 32+ messages in thread
From: Chao Xie @ 2013-01-21 10:07 UTC (permalink / raw)
To: linux-arm-kernel
phy setting are formatted into a phy driver at drivers/usb/phy,
we do not need do the setting in SOC files.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
arch/arm/mach-mmp/devices.c | 278 -----------------------------
arch/arm/mach-mmp/include/mach/regs-usb.h | 253 --------------------------
2 files changed, 0 insertions(+), 531 deletions(-)
delete mode 100644 arch/arm/mach-mmp/include/mach/regs-usb.h
diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c
index dd2d8b1..af341e5 100644
--- a/arch/arm/mach-mmp/devices.c
+++ b/arch/arm/mach-mmp/devices.c
@@ -15,7 +15,6 @@
#include <mach/irqs.h>
#include <mach/devices.h>
#include <mach/cputype.h>
-#include <mach/regs-usb.h>
int __init pxa_register_device(struct pxa_device_desc *desc,
void *data, size_t size)
@@ -72,280 +71,3 @@ int __init pxa_register_device(struct pxa_device_desc *desc,
return platform_device_add(pdev);
}
-#if defined(CONFIG_USB) || defined(CONFIG_USB_GADGET)
-
-/*****************************************************************************
- * The registers read/write routines
- *****************************************************************************/
-
-static unsigned int u2o_get(void __iomem *base, unsigned int offset)
-{
- return readl_relaxed(base + offset);
-}
-
-static void u2o_set(void __iomem *base, unsigned int offset,
- unsigned int value)
-{
- u32 reg;
-
- reg = readl_relaxed(base + offset);
- reg |= value;
- writel_relaxed(reg, base + offset);
- readl_relaxed(base + offset);
-}
-
-static void u2o_clear(void __iomem *base, unsigned int offset,
- unsigned int value)
-{
- u32 reg;
-
- reg = readl_relaxed(base + offset);
- reg &= ~value;
- writel_relaxed(reg, base + offset);
- readl_relaxed(base + offset);
-}
-
-static void u2o_write(void __iomem *base, unsigned int offset,
- unsigned int value)
-{
- writel_relaxed(value, base + offset);
- readl_relaxed(base + offset);
-}
-
-#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV)
-
-#if defined(CONFIG_CPU_PXA910) || defined(CONFIG_CPU_PXA168)
-
-static DEFINE_MUTEX(phy_lock);
-static int phy_init_cnt;
-
-static int usb_phy_init_internal(void __iomem *base)
-{
- int loops;
-
- pr_info("Init usb phy!!!\n");
-
- /* Initialize the USB PHY power */
- if (cpu_is_pxa910()) {
- u2o_set(base, UTMI_CTRL, (1<<UTMI_CTRL_INPKT_DELAY_SOF_SHIFT)
- | (1<<UTMI_CTRL_PU_REF_SHIFT));
- }
-
- u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
- u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
-
- /* UTMI_PLL settings */
- u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK
- | UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK
- | UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK
- | UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK);
-
- u2o_set(base, UTMI_PLL, 0xee<<UTMI_PLL_FBDIV_SHIFT
- | 0xb<<UTMI_PLL_REFDIV_SHIFT | 3<<UTMI_PLL_PLLVDD18_SHIFT
- | 3<<UTMI_PLL_PLLVDD12_SHIFT | 3<<UTMI_PLL_PLLCALI12_SHIFT
- | 1<<UTMI_PLL_ICP_SHIFT | 3<<UTMI_PLL_KVCO_SHIFT);
-
- /* UTMI_TX */
- u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK
- | UTMI_TX_TXVDD12_MASK | UTMI_TX_CK60_PHSEL_MASK
- | UTMI_TX_IMPCAL_VTH_MASK | UTMI_TX_REG_EXT_FS_RCAL_MASK
- | UTMI_TX_AMP_MASK);
- u2o_set(base, UTMI_TX, 3<<UTMI_TX_TXVDD12_SHIFT
- | 4<<UTMI_TX_CK60_PHSEL_SHIFT | 4<<UTMI_TX_IMPCAL_VTH_SHIFT
- | 8<<UTMI_TX_REG_EXT_FS_RCAL_SHIFT | 3<<UTMI_TX_AMP_SHIFT);
-
- /* UTMI_RX */
- u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK
- | UTMI_REG_SQ_LENGTH_MASK);
- u2o_set(base, UTMI_RX, 7<<UTMI_RX_SQ_THRESH_SHIFT
- | 2<<UTMI_REG_SQ_LENGTH_SHIFT);
-
- /* UTMI_IVREF */
- if (cpu_is_pxa168())
- /* fixing Microsoft Altair board interface with NEC hub issue -
- * Set UTMI_IVREF from 0x4a3 to 0x4bf */
- u2o_write(base, UTMI_IVREF, 0x4bf);
-
- /* toggle VCOCAL_START bit of UTMI_PLL */
- udelay(200);
- u2o_set(base, UTMI_PLL, VCOCAL_START);
- udelay(40);
- u2o_clear(base, UTMI_PLL, VCOCAL_START);
-
- /* toggle REG_RCAL_START bit of UTMI_TX */
- udelay(400);
- u2o_set(base, UTMI_TX, REG_RCAL_START);
- udelay(40);
- u2o_clear(base, UTMI_TX, REG_RCAL_START);
- udelay(400);
-
- /* Make sure PHY PLL is ready */
- loops = 0;
- while ((u2o_get(base, UTMI_PLL) & PLL_READY) == 0) {
- mdelay(1);
- loops++;
- if (loops > 100) {
- printk(KERN_WARNING "calibrate timeout, UTMI_PLL %x\n",
- u2o_get(base, UTMI_PLL));
- break;
- }
- }
-
- if (cpu_is_pxa168()) {
- u2o_set(base, UTMI_RESERVE, 1 << 5);
- /* Turn on UTMI PHY OTG extension */
- u2o_write(base, UTMI_OTG_ADDON, 1);
- }
-
- return 0;
-}
-
-static int usb_phy_deinit_internal(void __iomem *base)
-{
- pr_info("Deinit usb phy!!!\n");
-
- if (cpu_is_pxa168())
- u2o_clear(base, UTMI_OTG_ADDON, UTMI_OTG_ADDON_OTG_ON);
-
- u2o_clear(base, UTMI_CTRL, UTMI_CTRL_RXBUF_PDWN);
- u2o_clear(base, UTMI_CTRL, UTMI_CTRL_TXBUF_PDWN);
- u2o_clear(base, UTMI_CTRL, UTMI_CTRL_USB_CLK_EN);
- u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
- u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
-
- return 0;
-}
-
-int pxa_usb_phy_init(void __iomem *phy_reg)
-{
- mutex_lock(&phy_lock);
- if (phy_init_cnt++ == 0)
- usb_phy_init_internal(phy_reg);
- mutex_unlock(&phy_lock);
- return 0;
-}
-
-void pxa_usb_phy_deinit(void __iomem *phy_reg)
-{
- WARN_ON(phy_init_cnt == 0);
-
- mutex_lock(&phy_lock);
- if (--phy_init_cnt == 0)
- usb_phy_deinit_internal(phy_reg);
- mutex_unlock(&phy_lock);
-}
-#endif
-#endif
-#endif
-
-#ifdef CONFIG_USB_SUPPORT
-static u64 usb_dma_mask = ~(u32)0;
-
-#ifdef CONFIG_USB_MV_UDC
-struct resource pxa168_u2o_resources[] = {
- /* regbase */
- [0] = {
- .start = PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
- .end = PXA168_U2O_REGBASE + USB_REG_RANGE,
- .flags = IORESOURCE_MEM,
- .name = "capregs",
- },
- /* phybase */
- [1] = {
- .start = PXA168_U2O_PHYBASE,
- .end = PXA168_U2O_PHYBASE + USB_PHY_RANGE,
- .flags = IORESOURCE_MEM,
- .name = "phyregs",
- },
- [2] = {
- .start = IRQ_PXA168_USB1,
- .end = IRQ_PXA168_USB1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device pxa168_device_u2o = {
- .name = "mv-udc",
- .id = -1,
- .resource = pxa168_u2o_resources,
- .num_resources = ARRAY_SIZE(pxa168_u2o_resources),
- .dev = {
- .dma_mask = &usb_dma_mask,
- .coherent_dma_mask = 0xffffffff,
- }
-};
-#endif /* CONFIG_USB_MV_UDC */
-
-#ifdef CONFIG_USB_EHCI_MV_U2O
-struct resource pxa168_u2oehci_resources[] = {
- /* regbase */
- [0] = {
- .start = PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
- .end = PXA168_U2O_REGBASE + USB_REG_RANGE,
- .flags = IORESOURCE_MEM,
- .name = "capregs",
- },
- /* phybase */
- [1] = {
- .start = PXA168_U2O_PHYBASE,
- .end = PXA168_U2O_PHYBASE + USB_PHY_RANGE,
- .flags = IORESOURCE_MEM,
- .name = "phyregs",
- },
- [2] = {
- .start = IRQ_PXA168_USB1,
- .end = IRQ_PXA168_USB1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device pxa168_device_u2oehci = {
- .name = "pxa-u2oehci",
- .id = -1,
- .dev = {
- .dma_mask = &usb_dma_mask,
- .coherent_dma_mask = 0xffffffff,
- },
-
- .num_resources = ARRAY_SIZE(pxa168_u2oehci_resources),
- .resource = pxa168_u2oehci_resources,
-};
-#endif
-
-#if defined(CONFIG_USB_MV_OTG)
-struct resource pxa168_u2ootg_resources[] = {
- /* regbase */
- [0] = {
- .start = PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
- .end = PXA168_U2O_REGBASE + USB_REG_RANGE,
- .flags = IORESOURCE_MEM,
- .name = "capregs",
- },
- /* phybase */
- [1] = {
- .start = PXA168_U2O_PHYBASE,
- .end = PXA168_U2O_PHYBASE + USB_PHY_RANGE,
- .flags = IORESOURCE_MEM,
- .name = "phyregs",
- },
- [2] = {
- .start = IRQ_PXA168_USB1,
- .end = IRQ_PXA168_USB1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device pxa168_device_u2ootg = {
- .name = "mv-otg",
- .id = -1,
- .dev = {
- .dma_mask = &usb_dma_mask,
- .coherent_dma_mask = 0xffffffff,
- },
-
- .num_resources = ARRAY_SIZE(pxa168_u2ootg_resources),
- .resource = pxa168_u2ootg_resources,
-};
-#endif /* CONFIG_USB_MV_OTG */
-
-#endif
diff --git a/arch/arm/mach-mmp/include/mach/regs-usb.h b/arch/arm/mach-mmp/include/mach/regs-usb.h
deleted file mode 100644
index b047bf4..0000000
--- a/arch/arm/mach-mmp/include/mach/regs-usb.h
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_ARCH_REGS_USB_H
-#define __ASM_ARCH_REGS_USB_H
-
-#define PXA168_U2O_REGBASE (0xd4208000)
-#define PXA168_U2O_PHYBASE (0xd4207000)
-
-#define PXA168_U2H_REGBASE (0xd4209000)
-#define PXA168_U2H_PHYBASE (0xd4206000)
-
-#define MMP3_HSIC1_REGBASE (0xf0001000)
-#define MMP3_HSIC1_PHYBASE (0xf0001800)
-
-#define MMP3_HSIC2_REGBASE (0xf0002000)
-#define MMP3_HSIC2_PHYBASE (0xf0002800)
-
-#define MMP3_FSIC_REGBASE (0xf0003000)
-#define MMP3_FSIC_PHYBASE (0xf0003800)
-
-
-#define USB_REG_RANGE (0x1ff)
-#define USB_PHY_RANGE (0xff)
-
-/* registers */
-#define U2x_CAPREGS_OFFSET 0x100
-
-/* phy regs */
-#define UTMI_REVISION 0x0
-#define UTMI_CTRL 0x4
-#define UTMI_PLL 0x8
-#define UTMI_TX 0xc
-#define UTMI_RX 0x10
-#define UTMI_IVREF 0x14
-#define UTMI_T0 0x18
-#define UTMI_T1 0x1c
-#define UTMI_T2 0x20
-#define UTMI_T3 0x24
-#define UTMI_T4 0x28
-#define UTMI_T5 0x2c
-#define UTMI_RESERVE 0x30
-#define UTMI_USB_INT 0x34
-#define UTMI_DBG_CTL 0x38
-#define UTMI_OTG_ADDON 0x3c
-
-/* For UTMICTRL Register */
-#define UTMI_CTRL_USB_CLK_EN (1 << 31)
-/* pxa168 */
-#define UTMI_CTRL_SUSPEND_SET1 (1 << 30)
-#define UTMI_CTRL_SUSPEND_SET2 (1 << 29)
-#define UTMI_CTRL_RXBUF_PDWN (1 << 24)
-#define UTMI_CTRL_TXBUF_PDWN (1 << 11)
-
-#define UTMI_CTRL_INPKT_DELAY_SHIFT 30
-#define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT 28
-#define UTMI_CTRL_PU_REF_SHIFT 20
-#define UTMI_CTRL_ARC_PULLDN_SHIFT 12
-#define UTMI_CTRL_PLL_PWR_UP_SHIFT 1
-#define UTMI_CTRL_PWR_UP_SHIFT 0
-
-/* For UTMI_PLL Register */
-#define UTMI_PLL_PLLCALI12_SHIFT 29
-#define UTMI_PLL_PLLCALI12_MASK (0x3 << 29)
-
-#define UTMI_PLL_PLLVDD18_SHIFT 27
-#define UTMI_PLL_PLLVDD18_MASK (0x3 << 27)
-
-#define UTMI_PLL_PLLVDD12_SHIFT 25
-#define UTMI_PLL_PLLVDD12_MASK (0x3 << 25)
-
-#define UTMI_PLL_CLK_BLK_EN_SHIFT 24
-#define CLK_BLK_EN (0x1 << 24)
-#define PLL_READY (0x1 << 23)
-#define KVCO_EXT (0x1 << 22)
-#define VCOCAL_START (0x1 << 21)
-
-#define UTMI_PLL_KVCO_SHIFT 15
-#define UTMI_PLL_KVCO_MASK (0x7 << 15)
-
-#define UTMI_PLL_ICP_SHIFT 12
-#define UTMI_PLL_ICP_MASK (0x7 << 12)
-
-#define UTMI_PLL_FBDIV_SHIFT 4
-#define UTMI_PLL_FBDIV_MASK (0xFF << 4)
-
-#define UTMI_PLL_REFDIV_SHIFT 0
-#define UTMI_PLL_REFDIV_MASK (0xF << 0)
-
-/* For UTMI_TX Register */
-#define UTMI_TX_REG_EXT_FS_RCAL_SHIFT 27
-#define UTMI_TX_REG_EXT_FS_RCAL_MASK (0xf << 27)
-
-#define UTMI_TX_REG_EXT_FS_RCAL_EN_SHIFT 26
-#define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK (0x1 << 26)
-
-#define UTMI_TX_TXVDD12_SHIFT 22
-#define UTMI_TX_TXVDD12_MASK (0x3 << 22)
-
-#define UTMI_TX_CK60_PHSEL_SHIFT 17
-#define UTMI_TX_CK60_PHSEL_MASK (0xf << 17)
-
-#define UTMI_TX_IMPCAL_VTH_SHIFT 14
-#define UTMI_TX_IMPCAL_VTH_MASK (0x7 << 14)
-
-#define REG_RCAL_START (0x1 << 12)
-
-#define UTMI_TX_LOW_VDD_EN_SHIFT 11
-
-#define UTMI_TX_AMP_SHIFT 0
-#define UTMI_TX_AMP_MASK (0x7 << 0)
-
-/* For UTMI_RX Register */
-#define UTMI_REG_SQ_LENGTH_SHIFT 15
-#define UTMI_REG_SQ_LENGTH_MASK (0x3 << 15)
-
-#define UTMI_RX_SQ_THRESH_SHIFT 4
-#define UTMI_RX_SQ_THRESH_MASK (0xf << 4)
-
-#define UTMI_OTG_ADDON_OTG_ON (1 << 0)
-
-/* For MMP3 USB Phy */
-#define USB2_PLL_REG0 0x4
-#define USB2_PLL_REG1 0x8
-#define USB2_TX_REG0 0x10
-#define USB2_TX_REG1 0x14
-#define USB2_TX_REG2 0x18
-#define USB2_RX_REG0 0x20
-#define USB2_RX_REG1 0x24
-#define USB2_RX_REG2 0x28
-#define USB2_ANA_REG0 0x30
-#define USB2_ANA_REG1 0x34
-#define USB2_ANA_REG2 0x38
-#define USB2_DIG_REG0 0x3C
-#define USB2_DIG_REG1 0x40
-#define USB2_DIG_REG2 0x44
-#define USB2_DIG_REG3 0x48
-#define USB2_TEST_REG0 0x4C
-#define USB2_TEST_REG1 0x50
-#define USB2_TEST_REG2 0x54
-#define USB2_CHARGER_REG0 0x58
-#define USB2_OTG_REG0 0x5C
-#define USB2_PHY_MON0 0x60
-#define USB2_RESETVE_REG0 0x64
-#define USB2_ICID_REG0 0x78
-#define USB2_ICID_REG1 0x7C
-
-/* USB2_PLL_REG0 */
-/* This is for Ax stepping */
-#define USB2_PLL_FBDIV_SHIFT_MMP3 0
-#define USB2_PLL_FBDIV_MASK_MMP3 (0xFF << 0)
-
-#define USB2_PLL_REFDIV_SHIFT_MMP3 8
-#define USB2_PLL_REFDIV_MASK_MMP3 (0xF << 8)
-
-#define USB2_PLL_VDD12_SHIFT_MMP3 12
-#define USB2_PLL_VDD18_SHIFT_MMP3 14
-
-/* This is for B0 stepping */
-#define USB2_PLL_FBDIV_SHIFT_MMP3_B0 0
-#define USB2_PLL_REFDIV_SHIFT_MMP3_B0 9
-#define USB2_PLL_VDD18_SHIFT_MMP3_B0 14
-#define USB2_PLL_FBDIV_MASK_MMP3_B0 0x01FF
-#define USB2_PLL_REFDIV_MASK_MMP3_B0 0x3E00
-
-#define USB2_PLL_CAL12_SHIFT_MMP3 0
-#define USB2_PLL_CALI12_MASK_MMP3 (0x3 << 0)
-
-#define USB2_PLL_VCOCAL_START_SHIFT_MMP3 2
-
-#define USB2_PLL_KVCO_SHIFT_MMP3 4
-#define USB2_PLL_KVCO_MASK_MMP3 (0x7<<4)
-
-#define USB2_PLL_ICP_SHIFT_MMP3 8
-#define USB2_PLL_ICP_MASK_MMP3 (0x7<<8)
-
-#define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3 12
-
-#define USB2_PLL_PU_PLL_SHIFT_MMP3 13
-#define USB2_PLL_PU_PLL_MASK (0x1 << 13)
-
-#define USB2_PLL_READY_MASK_MMP3 (0x1 << 15)
-
-/* USB2_TX_REG0 */
-#define USB2_TX_IMPCAL_VTH_SHIFT_MMP3 8
-#define USB2_TX_IMPCAL_VTH_MASK_MMP3 (0x7 << 8)
-
-#define USB2_TX_RCAL_START_SHIFT_MMP3 13
-
-/* USB2_TX_REG1 */
-#define USB2_TX_CK60_PHSEL_SHIFT_MMP3 0
-#define USB2_TX_CK60_PHSEL_MASK_MMP3 (0xf << 0)
-
-#define USB2_TX_AMP_SHIFT_MMP3 4
-#define USB2_TX_AMP_MASK_MMP3 (0x7 << 4)
-
-#define USB2_TX_VDD12_SHIFT_MMP3 8
-#define USB2_TX_VDD12_MASK_MMP3 (0x3 << 8)
-
-/* USB2_TX_REG2 */
-#define USB2_TX_DRV_SLEWRATE_SHIFT 10
-
-/* USB2_RX_REG0 */
-#define USB2_RX_SQ_THRESH_SHIFT_MMP3 4
-#define USB2_RX_SQ_THRESH_MASK_MMP3 (0xf << 4)
-
-#define USB2_RX_SQ_LENGTH_SHIFT_MMP3 10
-#define USB2_RX_SQ_LENGTH_MASK_MMP3 (0x3 << 10)
-
-/* USB2_ANA_REG1*/
-#define USB2_ANA_PU_ANA_SHIFT_MMP3 14
-
-/* USB2_OTG_REG0 */
-#define USB2_OTG_PU_OTG_SHIFT_MMP3 3
-
-/* fsic registers */
-#define FSIC_MISC 0x4
-#define FSIC_INT 0x28
-#define FSIC_CTRL 0x30
-
-/* HSIC registers */
-#define HSIC_PAD_CTRL 0x4
-
-#define HSIC_CTRL 0x8
-#define HSIC_CTRL_HSIC_ENABLE (1<<7)
-#define HSIC_CTRL_PLL_BYPASS (1<<4)
-
-#define TEST_GRP_0 0xc
-#define TEST_GRP_1 0x10
-
-#define HSIC_INT 0x14
-#define HSIC_INT_READY_INT_EN (1<<10)
-#define HSIC_INT_CONNECT_INT_EN (1<<9)
-#define HSIC_INT_CORE_INT_EN (1<<8)
-#define HSIC_INT_HS_READY (1<<2)
-#define HSIC_INT_CONNECT (1<<1)
-#define HSIC_INT_CORE (1<<0)
-
-#define HSIC_CONFIG 0x18
-#define USBHSIC_CTRL 0x20
-
-#define HSIC_USB_CTRL 0x28
-#define HSIC_USB_CTRL_CLKEN 1
-#define HSIC_USB_CLK_PHY 0x0
-#define HSIC_USB_CLK_PMU 0x1
-
-#endif /* __ASM_ARCH_PXA_U2O_H */
--
1.7.4.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [V4 PATCH 17/26] arm: mmp: remove usb devices from pxa168
2013-01-21 10:07 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Chao Xie
` (15 preceding siblings ...)
2013-01-21 10:07 ` [V4 PATCH 16/26] arm: mmp: remove the usb phy setting Chao Xie
@ 2013-01-21 10:07 ` Chao Xie
2013-01-21 10:07 ` [V4 PATCH 18/26] usb: phy: mv_usb2_phy: add externel chip support Chao Xie
` (9 subsequent siblings)
26 siblings, 0 replies; 32+ messages in thread
From: Chao Xie @ 2013-01-21 10:07 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
arch/arm/mach-mmp/pxa168.c | 42 ------------------------------------------
1 files changed, 0 insertions(+), 42 deletions(-)
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index b7f074f..dd3a68b 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -28,7 +28,6 @@
#include <mach/mfp.h>
#include <linux/dma-mapping.h>
#include <mach/pxa168.h>
-#include <mach/regs-usb.h>
#include "common.h"
#include "clock.h"
@@ -135,47 +134,6 @@ struct platform_device pxa168_device_gpio = {
.resource = pxa168_resource_gpio,
};
-struct resource pxa168_usb_host_resources[] = {
- /* USB Host conroller register base */
- [0] = {
- .start = PXA168_U2H_REGBASE + U2x_CAPREGS_OFFSET,
- .end = PXA168_U2H_REGBASE + USB_REG_RANGE,
- .flags = IORESOURCE_MEM,
- .name = "capregs",
- },
- /* USB PHY register base */
- [1] = {
- .start = PXA168_U2H_PHYBASE,
- .end = PXA168_U2H_PHYBASE + USB_PHY_RANGE,
- .flags = IORESOURCE_MEM,
- .name = "phyregs",
- },
- [2] = {
- .start = IRQ_PXA168_USB2,
- .end = IRQ_PXA168_USB2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 pxa168_usb_host_dmamask = DMA_BIT_MASK(32);
-struct platform_device pxa168_device_usb_host = {
- .name = "pxa-sph",
- .id = -1,
- .dev = {
- .dma_mask = &pxa168_usb_host_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-
- .num_resources = ARRAY_SIZE(pxa168_usb_host_resources),
- .resource = pxa168_usb_host_resources,
-};
-
-int __init pxa168_add_usb_host(struct mv_usb_platform_data *pdata)
-{
- pxa168_device_usb_host.dev.platform_data = pdata;
- return platform_device_register(&pxa168_device_usb_host);
-}
-
void pxa168_restart(char mode, const char *cmd)
{
soft_restart(0xffff0000);
--
1.7.4.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [V4 PATCH 18/26] usb: phy: mv_usb2_phy: add externel chip support
2013-01-21 10:07 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Chao Xie
` (16 preceding siblings ...)
2013-01-21 10:07 ` [V4 PATCH 17/26] arm: mmp: remove usb devices from pxa168 Chao Xie
@ 2013-01-21 10:07 ` Chao Xie
2013-01-21 15:51 ` Russell King - ARM Linux
2013-01-21 10:07 ` [V4 PATCH 19/26] usb: gadget: mv_udc: add extern " Chao Xie
` (8 subsequent siblings)
26 siblings, 1 reply; 32+ messages in thread
From: Chao Xie @ 2013-01-21 10:07 UTC (permalink / raw)
To: linux-arm-kernel
For the vbus and idpin detection. It may be completed by some
external chip, for example the pmic chip 88pm860x in driver/mfd
can do it.
Although the usb controller can detect the vbus and id pin, but
it need clock on and PHY enabled to detect the
vbus/idpin. It will increase the power.
Using the external chip to detect vbus/idpin can save the power.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
drivers/usb/phy/mv_usb2_phy.c | 54 +++++++++++++++++++++
include/linux/platform_data/mv_usb.h | 15 ++----
include/linux/usb/mv_usb2.h | 85 ++++++++++++++++++++++++++++++++++
3 files changed, 144 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/phy/mv_usb2_phy.c b/drivers/usb/phy/mv_usb2_phy.c
index c2bccae..0bea901 100644
--- a/drivers/usb/phy/mv_usb2_phy.c
+++ b/drivers/usb/phy/mv_usb2_phy.c
@@ -136,6 +136,53 @@ struct mv_usb2_phy *mv_usb2_get_phy(void)
}
EXPORT_SYMBOL(mv_usb2_get_phy);
+int mv_usb2_register_notifier(struct mv_usb2_phy *phy,
+ struct notifier_block *nb)
+{
+ int ret;
+
+ if (!phy)
+ return -ENODEV;
+
+ ret = atomic_notifier_chain_register(phy->extern_chip.head, nb);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+EXPORT_SYMBOL(mv_usb2_register_notifier);
+
+int mv_usb2_unregister_notifier(struct mv_usb2_phy *phy,
+ struct notifier_block *nb)
+{
+ int ret;
+
+ if (!phy)
+ return -ENODEV;
+
+ ret = atomic_notifier_chain_unregister(phy->extern_chip.head, nb);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+EXPORT_SYMBOL(mv_usb2_unregister_notifier);
+
+int mv_usb2_notify(struct mv_usb2_phy *phy, unsigned long val, void *v)
+{
+ int ret;
+
+ if (!phy)
+ return -ENODEV;
+
+ ret = atomic_notifier_call_chain(phy->extern_chip.head, val, v);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+EXPORT_SYMBOL(mv_usb2_notify);
+
static unsigned int u2o_get(void __iomem *base, unsigned int offset)
{
return readl(base + offset);
@@ -414,6 +461,13 @@ static int usb_phy_probe(struct platform_device *pdev)
mv_phy->init = usb_phy_init;
mv_phy->shutdown = usb_phy_shutdown;
+ mv_phy->extern_chip.head = devm_kzalloc(&pdev->dev,
+ sizeof(*mv_phy->extern_chip.head),
+ GFP_KERNEL);
+ if (mv_phy->extern_chip.head == NULL)
+ return -ENOMEM;
+ ATOMIC_INIT_NOTIFIER_HEAD(mv_phy->extern_chip.head);
+
platform_set_drvdata(pdev, mv_phy);
the_phy = mv_phy;
diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h
index fd3d1b4..dc25d60 100644
--- a/include/linux/platform_data/mv_usb.h
+++ b/include/linux/platform_data/mv_usb.h
@@ -28,16 +28,13 @@ enum {
VBUS_HIGH = 1 << 0,
};
-struct mv_usb_addon_irq {
- unsigned int irq;
- int (*poll)(void);
-};
-
+#define MV_USB_HAS_VBUS_DETECTION (1 << 0)
+#define MV_USB_HAS_IDPIN_DETECTION (1 << 1)
struct mv_usb_platform_data {
unsigned int clknum;
char **clkname;
- struct mv_usb_addon_irq *id; /* Only valid for OTG. ID pin change*/
- struct mv_usb_addon_irq *vbus; /* valid for OTG/UDC. VBUS change*/
+
+ unsigned int extern_attr;
/* only valid for HCD. OTG or Host only*/
unsigned int mode;
@@ -45,9 +42,7 @@ struct mv_usb_platform_data {
/* This flag is used for that needs id pin checked by otg */
unsigned int disable_otg_clock_gating:1;
/* Force a_bus_req to be asserted */
- unsigned int otg_force_a_bus_req:1;
-
- int (*set_vbus)(unsigned int vbus);
+ unsigned int otg_force_a_bus_req:1;
};
struct mv_usb_phy_platform_data {
diff --git a/include/linux/usb/mv_usb2.h b/include/linux/usb/mv_usb2.h
index 9744a97..e0246d9 100644
--- a/include/linux/usb/mv_usb2.h
+++ b/include/linux/usb/mv_usb2.h
@@ -17,6 +17,33 @@
#include <linux/clk.h>
+enum {
+ EVENT_VBUS,
+ EVENT_ID,
+};
+
+struct pxa_usb_vbus_ops {
+ int (*get_vbus)(unsigned int *level);
+ int (*set_vbus)(unsigned int level);
+ int (*init)(void);
+};
+
+struct pxa_usb_idpin_ops {
+ int (*get_idpin)(unsigned int *level);
+ int (*init)(void);
+};
+
+struct pxa_usb_extern_ops {
+ struct pxa_usb_vbus_ops vbus;
+ struct pxa_usb_idpin_ops idpin;
+};
+
+struct mv_usb2_extern_chip {
+ unsigned int id;
+ struct pxa_usb_extern_ops ops;
+ struct atomic_notifier_head *head;
+};
+
struct mv_usb2_phy {
struct platform_device *pdev;
struct mutex phy_lock;
@@ -26,6 +53,8 @@ struct mv_usb2_phy {
struct clk **clks;
unsigned int clks_num;
+ struct mv_usb2_extern_chip extern_chip;
+
int (*init)(struct mv_usb2_phy *mv_phy);
void (*shutdown)(struct mv_usb2_phy *mv_phy);
};
@@ -34,10 +63,66 @@ struct mv_usb2_phy {
extern struct mv_usb2_phy *mv_usb2_get_phy(void);
+#define mv_usb2_has_extern_call(phy, o, f, arg...)( \
+{ \
+ int ret; \
+ ret = (!phy ? 0 : ((phy->extern_chip.ops.o.f) ? \
+ 1 : 0)); \
+ ret; \
+} \
+)
+
+#define mv_usb2_extern_call(phy, o, f, args...)( \
+{ \
+ int ret; \
+ ret = (!phy ? -ENODEV : ((phy->extern_chip.ops.o.f) ? \
+ phy->extern_chip.ops.o.f(args) : -ENOIOCTLCMD));\
+ ret; \
+} \
+)
+
+#define mv_usb2_set_extern_call(phy, o, f, p)( \
+{ \
+ int ret; \
+ ret = !phy ? -ENODEV : ((phy->extern_chip.ops.o.f) ? \
+ -EINVAL : ({phy->extern_chip.ops.o.f = p; 0; })); \
+ ret; \
+} \
+)
+
+extern int mv_usb2_register_notifier(struct mv_usb2_phy *phy,
+ struct notifier_block *nb);
+extern int mv_usb2_unregister_notifier(struct mv_usb2_phy *phy,
+ struct notifier_block *nb);
+extern int mv_usb2_notify(struct mv_usb2_phy *phy, unsigned long val, void *v);
+
#else
struct mv_usb2_phy *mv_usb2_get_phy(void) { return NULL; }
+#define mv_usb2_has_extern_call(phy, o, f, arg...)(0)
+
+#define mv_usb2_extern_call(phy, o, f, args...)(0)
+
+#define mv_usb2_set_extern_call(phy, o, f, p)(0)
+
+int mv_usb2_register_notifier(struct mv_usb2_phy *phy,
+ struct notifier_block *nb)
+{
+ return -EINVAL;
+}
+
+int mv_usb2_unregister_notifier(struct mv_usb2_phy *phy,
+ struct notifier_block *nb)
+{
+ return -EINVAL;
+}
+
+int mv_usb2_notify(struct mv_usb2_phy *phy, unsigned long val, void *v)
+{
+ return 0;
+}
+
#endif
#endif
--
1.7.4.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [V4 PATCH 18/26] usb: phy: mv_usb2_phy: add externel chip support
2013-01-21 10:07 ` [V4 PATCH 18/26] usb: phy: mv_usb2_phy: add externel chip support Chao Xie
@ 2013-01-21 15:51 ` Russell King - ARM Linux
2013-01-22 2:51 ` Chao Xie
0 siblings, 1 reply; 32+ messages in thread
From: Russell King - ARM Linux @ 2013-01-21 15:51 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Jan 21, 2013 at 05:07:36AM -0500, Chao Xie wrote:
> + mv_phy->extern_chip.head = devm_kzalloc(&pdev->dev,
> + sizeof(*mv_phy->extern_chip.head),
> + GFP_KERNEL);
> + if (mv_phy->extern_chip.head == NULL)
> + return -ENOMEM;
> + ATOMIC_INIT_NOTIFIER_HEAD(mv_phy->extern_chip.head);
Why do you need to allocate an atomic notifier list head as an entirely
separate data structure?
^ permalink raw reply [flat|nested] 32+ messages in thread
* [V4 PATCH 18/26] usb: phy: mv_usb2_phy: add externel chip support
2013-01-21 15:51 ` Russell King - ARM Linux
@ 2013-01-22 2:51 ` Chao Xie
2013-01-23 11:47 ` Felipe Balbi
0 siblings, 1 reply; 32+ messages in thread
From: Chao Xie @ 2013-01-22 2:51 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Jan 21, 2013 at 11:51 PM, Russell King - ARM Linux
<linux@arm.linux.org.uk> wrote:
> On Mon, Jan 21, 2013 at 05:07:36AM -0500, Chao Xie wrote:
>> + mv_phy->extern_chip.head = devm_kzalloc(&pdev->dev,
>> + sizeof(*mv_phy->extern_chip.head),
>> + GFP_KERNEL);
>> + if (mv_phy->extern_chip.head == NULL)
>> + return -ENOMEM;
>> + ATOMIC_INIT_NOTIFIER_HEAD(mv_phy->extern_chip.head);
>
> Why do you need to allocate an atomic notifier list head as an entirely
> separate data structure?
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
Th reason is that the original code seperate the extern_chip and phy
support. So it depends
on the ->head to detect whether extern_chip is initialized or not.
Now it is combined with phy, the ->phy pointer can do the job.
^ permalink raw reply [flat|nested] 32+ messages in thread
* [V4 PATCH 18/26] usb: phy: mv_usb2_phy: add externel chip support
2013-01-22 2:51 ` Chao Xie
@ 2013-01-23 11:47 ` Felipe Balbi
2013-01-24 1:33 ` Chao Xie
0 siblings, 1 reply; 32+ messages in thread
From: Felipe Balbi @ 2013-01-23 11:47 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Tue, Jan 22, 2013 at 10:51:32AM +0800, Chao Xie wrote:
> On Mon, Jan 21, 2013 at 11:51 PM, Russell King - ARM Linux
> <linux@arm.linux.org.uk> wrote:
> > On Mon, Jan 21, 2013 at 05:07:36AM -0500, Chao Xie wrote:
> >> + mv_phy->extern_chip.head = devm_kzalloc(&pdev->dev,
> >> + sizeof(*mv_phy->extern_chip.head),
> >> + GFP_KERNEL);
> >> + if (mv_phy->extern_chip.head == NULL)
> >> + return -ENOMEM;
> >> + ATOMIC_INIT_NOTIFIER_HEAD(mv_phy->extern_chip.head);
> >
> > Why do you need to allocate an atomic notifier list head as an entirely
> > separate data structure?
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> > the body of a message to majordomo at vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> Th reason is that the original code seperate the extern_chip and phy
> support. So it depends
> on the ->head to detect whether extern_chip is initialized or not.
> Now it is combined with phy, the ->phy pointer can do the job.
does that need to be dynamically allocated ?
--
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130123/36addcdc/attachment.sig>
^ permalink raw reply [flat|nested] 32+ messages in thread
* [V4 PATCH 18/26] usb: phy: mv_usb2_phy: add externel chip support
2013-01-23 11:47 ` Felipe Balbi
@ 2013-01-24 1:33 ` Chao Xie
0 siblings, 0 replies; 32+ messages in thread
From: Chao Xie @ 2013-01-24 1:33 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jan 23, 2013 at 7:47 PM, Felipe Balbi <balbi@ti.com> wrote:
> Hi,
>
> On Tue, Jan 22, 2013 at 10:51:32AM +0800, Chao Xie wrote:
>> On Mon, Jan 21, 2013 at 11:51 PM, Russell King - ARM Linux
>> <linux@arm.linux.org.uk> wrote:
>> > On Mon, Jan 21, 2013 at 05:07:36AM -0500, Chao Xie wrote:
>> >> + mv_phy->extern_chip.head = devm_kzalloc(&pdev->dev,
>> >> + sizeof(*mv_phy->extern_chip.head),
>> >> + GFP_KERNEL);
>> >> + if (mv_phy->extern_chip.head == NULL)
>> >> + return -ENOMEM;
>> >> + ATOMIC_INIT_NOTIFIER_HEAD(mv_phy->extern_chip.head);
>> >
>> > Why do you need to allocate an atomic notifier list head as an entirely
>> > separate data structure?
>> > --
>> > To unsubscribe from this list: send the line "unsubscribe linux-usb" in
>> > the body of a message to majordomo at vger.kernel.org
>> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>> Th reason is that the original code seperate the extern_chip and phy
>> support. So it depends
>> on the ->head to detect whether extern_chip is initialized or not.
>> Now it is combined with phy, the ->phy pointer can do the job.
>
> does that need to be dynamically allocated ?
>
> --
> balbi
hi
It does not need to be dynamically allocated. I will modify it, and
send out V5 today. Thanks for Russell's review.
^ permalink raw reply [flat|nested] 32+ messages in thread
* [V4 PATCH 19/26] usb: gadget: mv_udc: add extern chip support
2013-01-21 10:07 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Chao Xie
` (17 preceding siblings ...)
2013-01-21 10:07 ` [V4 PATCH 18/26] usb: phy: mv_usb2_phy: add externel chip support Chao Xie
@ 2013-01-21 10:07 ` Chao Xie
2013-01-21 10:07 ` [V4 PATCH 20/26] usb: ehci: ehci-mv: " Chao Xie
` (7 subsequent siblings)
26 siblings, 0 replies; 32+ messages in thread
From: Chao Xie @ 2013-01-21 10:07 UTC (permalink / raw)
To: linux-arm-kernel
Because arch-mmp will make use of irq domain for irq
allocation, the irqs allocated for PMIC is dynamical.
The vbus/idpin irqs from PMIC can not be passed by platform data.
Using the extern chip APIs provides by PHY driver can solve this
problem.
Marvell usb PHY driver provides a middle layer.
The PMIC usb drivers will help to register the callbacks in the
marvell usb PHY driver.
udc/otg/ehci driver will call the callbacks.
Then we do not need pass the information in platform data. It will
remove another block in the way of enabling device tree for usb.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
drivers/usb/gadget/mv_udc.h | 3 ++
drivers/usb/gadget/mv_udc_core.c | 45 ++++++++++++++++++++++---------------
2 files changed, 30 insertions(+), 18 deletions(-)
diff --git a/drivers/usb/gadget/mv_udc.h b/drivers/usb/gadget/mv_udc.h
index 4851b2b..50ae7c7 100644
--- a/drivers/usb/gadget/mv_udc.h
+++ b/drivers/usb/gadget/mv_udc.h
@@ -178,6 +178,9 @@ struct mv_udc {
struct platform_device *dev;
int irq;
+ unsigned int extern_attr;
+ struct notifier_block notifier;
+
struct mv_cap_regs __iomem *cap_regs;
struct mv_op_regs __iomem *op_regs;
unsigned int max_eps;
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index 76fcfc7..4b50334 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -2077,15 +2077,16 @@ static irqreturn_t mv_udc_irq(int irq, void *dev)
return IRQ_HANDLED;
}
-static irqreturn_t mv_udc_vbus_irq(int irq, void *dev)
+static int mv_udc_vbus_notifier_call(struct notifier_block *nb,
+ unsigned long val, void *v)
{
- struct mv_udc *udc = (struct mv_udc *)dev;
+ struct mv_udc *udc = container_of(nb, struct mv_udc, notifier);
/* polling VBUS and init phy may cause too much time*/
- if (udc->qwork)
+ if (udc->qwork && val == EVENT_VBUS)
queue_work(udc->qwork, &udc->vbus_work);
- return IRQ_HANDLED;
+ return 0;
}
static void mv_udc_vbus_work(struct work_struct *work)
@@ -2094,10 +2095,12 @@ static void mv_udc_vbus_work(struct work_struct *work)
unsigned int vbus;
udc = container_of(work, struct mv_udc, vbus_work);
- if (!udc->pdata->vbus)
+ if (!(udc->extern_attr & MV_USB_HAS_VBUS_DETECTION))
+ return;
+
+ if (mv_usb2_extern_call(udc->phy, vbus, get_vbus, &vbus))
return;
- vbus = udc->pdata->vbus->poll();
dev_info(&udc->dev->dev, "vbus is %d\n", vbus);
if (vbus == VBUS_HIGH)
@@ -2124,6 +2127,9 @@ static int mv_udc_remove(struct platform_device *pdev)
usb_del_gadget_udc(&udc->gadget);
+ if (udc->extern_attr & MV_USB_HAS_VBUS_DETECTION)
+ mv_usb2_unregister_notifier(udc->phy, &udc->notifier);
+
if (udc->qwork) {
flush_workqueue(udc->qwork);
destroy_workqueue(udc->qwork);
@@ -2169,6 +2175,7 @@ static int mv_udc_probe(struct platform_device *pdev)
}
udc->done = &release_done;
+ udc->extern_attr = pdata->extern_attr;
udc->pdata = pdev->dev.platform_data;
spin_lock_init(&udc->lock);
@@ -2319,17 +2326,8 @@ static int mv_udc_probe(struct platform_device *pdev)
/* VBUS detect: we can disable/enable clock on demand.*/
if (udc->transceiver)
udc->clock_gating = 1;
- else if (pdata->vbus) {
+ else if (udc->extern_attr & MV_USB_HAS_VBUS_DETECTION) {
udc->clock_gating = 1;
- retval = devm_request_threaded_irq(&pdev->dev,
- pdata->vbus->irq, NULL,
- mv_udc_vbus_irq, IRQF_ONESHOT, "vbus", udc);
- if (retval) {
- dev_info(&pdev->dev,
- "Can not request irq for VBUS, "
- "disable clock gating\n");
- udc->clock_gating = 0;
- }
udc->qwork = create_singlethread_workqueue("mv_udc_queue");
if (!udc->qwork) {
@@ -2339,6 +2337,8 @@ static int mv_udc_probe(struct platform_device *pdev)
}
INIT_WORK(&udc->vbus_work, mv_udc_vbus_work);
+ udc->notifier.notifier_call = mv_udc_vbus_notifier_call;
+ mv_usb2_register_notifier(udc->phy, &udc->notifier);
}
/*
@@ -2362,6 +2362,9 @@ static int mv_udc_probe(struct platform_device *pdev)
return 0;
err_create_workqueue:
+ if (!udc->transceiver
+ && (udc->extern_attr & MV_USB_HAS_VBUS_DETECTION))
+ mv_usb2_unregister_notifier(udc->phy, &udc->notifier);
destroy_workqueue(udc->qwork);
err_unregister:
device_unregister(&udc->gadget.dev);
@@ -2380,6 +2383,7 @@ err_disable_clock:
static int mv_udc_suspend(struct device *dev)
{
struct mv_udc *udc;
+ unsigned int vbus;
udc = dev_get_drvdata(dev);
@@ -2387,11 +2391,16 @@ static int mv_udc_suspend(struct device *dev)
if (udc->transceiver)
return 0;
- if (udc->pdata->vbus && udc->pdata->vbus->poll)
- if (udc->pdata->vbus->poll() == VBUS_HIGH) {
+ if ((udc->extern_attr & MV_USB_HAS_VBUS_DETECTION) &&
+ mv_usb2_has_extern_call(udc->phy, vbus, get_vbus)) {
+ if (mv_usb2_extern_call(udc->phy, vbus, get_vbus, &vbus))
+ return -EAGAIN;
+
+ if (vbus == VBUS_HIGH) {
dev_info(&udc->dev->dev, "USB cable is connected!\n");
return -EAGAIN;
}
+ }
/*
* only cable is unplugged, udc can suspend.
--
1.7.4.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [V4 PATCH 20/26] usb: ehci: ehci-mv: add extern chip support
2013-01-21 10:07 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Chao Xie
` (18 preceding siblings ...)
2013-01-21 10:07 ` [V4 PATCH 19/26] usb: gadget: mv_udc: add extern " Chao Xie
@ 2013-01-21 10:07 ` Chao Xie
2013-01-21 10:07 ` [V4 PATCH 21/26] usb: otg: mv_otg: " Chao Xie
` (6 subsequent siblings)
26 siblings, 0 replies; 32+ messages in thread
From: Chao Xie @ 2013-01-21 10:07 UTC (permalink / raw)
To: linux-arm-kernel
It does the similar things as what we do for udc driver.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
---
drivers/usb/host/ehci-mv.c | 12 ++++++------
1 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index be504fd..171e145 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -256,8 +256,8 @@ static int mv_ehci_probe(struct platform_device *pdev)
goto err_disable_clk;
#endif
} else {
- if (pdata->set_vbus)
- pdata->set_vbus(1);
+ if (mv_usb2_has_extern_call(ehci_mv->mvphy, vbus, set_vbus))
+ mv_usb2_extern_call(ehci_mv->mvphy, vbus, set_vbus, 1);
retval = usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
if (retval) {
@@ -275,8 +275,8 @@ static int mv_ehci_probe(struct platform_device *pdev)
return 0;
err_set_vbus:
- if (pdata->set_vbus)
- pdata->set_vbus(0);
+ if (mv_usb2_has_extern_call(ehci_mv->mvphy, vbus, set_vbus))
+ mv_usb2_extern_call(ehci_mv->mvphy, vbus, set_vbus, 0);
err_disable_clk:
mv_ehci_disable(ehci_mv);
err_clear_drvdata:
@@ -299,8 +299,8 @@ static int mv_ehci_remove(struct platform_device *pdev)
otg_set_host(ehci_mv->otg->otg, NULL);
if (ehci_mv->mode == MV_USB_MODE_HOST) {
- if (ehci_mv->pdata->set_vbus)
- ehci_mv->pdata->set_vbus(0);
+ if (mv_usb2_has_extern_call(ehci_mv->mvphy, vbus, set_vbus))
+ mv_usb2_extern_call(ehci_mv->mvphy, vbus, set_vbus, 1);
mv_ehci_disable(ehci_mv);
}
--
1.7.4.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [V4 PATCH 21/26] usb: otg: mv_otg: add extern chip support
2013-01-21 10:07 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Chao Xie
` (19 preceding siblings ...)
2013-01-21 10:07 ` [V4 PATCH 20/26] usb: ehci: ehci-mv: " Chao Xie
@ 2013-01-21 10:07 ` Chao Xie
2013-01-21 10:07 ` [V4 PATCH 22/26] arm: mmp: add extern chip support for brownstone Chao Xie
` (5 subsequent siblings)
26 siblings, 0 replies; 32+ messages in thread
From: Chao Xie @ 2013-01-21 10:07 UTC (permalink / raw)
To: linux-arm-kernel
It does the similar things as what we do for udc driver.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
drivers/usb/otg/mv_otg.c | 63 ++++++++++++++++++++-------------------------
drivers/usb/otg/mv_otg.h | 3 ++
2 files changed, 31 insertions(+), 35 deletions(-)
diff --git a/drivers/usb/otg/mv_otg.c b/drivers/usb/otg/mv_otg.c
index cc45ef2..379df92 100644
--- a/drivers/usb/otg/mv_otg.c
+++ b/drivers/usb/otg/mv_otg.c
@@ -59,10 +59,10 @@ static char *state_string[] = {
static int mv_otg_set_vbus(struct usb_otg *otg, bool on)
{
struct mv_otg *mvotg = container_of(otg->phy, struct mv_otg, phy);
- if (mvotg->pdata->set_vbus == NULL)
+ if (!mv_usb2_has_extern_call(mvotg->mvphy, vbus, set_vbus))
return -ENODEV;
- return mvotg->pdata->set_vbus(on);
+ return mv_usb2_extern_call(mvotg->mvphy, vbus, set_vbus, on);
}
static int mv_otg_set_host(struct usb_otg *otg,
@@ -184,14 +184,14 @@ static void mv_otg_init_irq(struct mv_otg *mvotg)
mvotg->irq_status = OTGSC_INTSTS_A_SESSION_VALID
| OTGSC_INTSTS_A_VBUS_VALID;
- if (mvotg->pdata->vbus == NULL) {
+ if (!(mvotg->extern_attr & MV_USB_HAS_VBUS_DETECTION)) {
mvotg->irq_en |= OTGSC_INTR_B_SESSION_VALID
| OTGSC_INTR_B_SESSION_END;
mvotg->irq_status |= OTGSC_INTSTS_B_SESSION_VALID
| OTGSC_INTSTS_B_SESSION_END;
}
- if (mvotg->pdata->id == NULL) {
+ if (!(mvotg->extern_attr & MV_USB_HAS_IDPIN_DETECTION)) {
mvotg->irq_en |= OTGSC_INTR_USB_ID;
mvotg->irq_status |= OTGSC_INTSTS_USB_ID;
}
@@ -306,11 +306,14 @@ static void mv_otg_update_inputs(struct mv_otg *mvotg)
{
struct mv_otg_ctrl *otg_ctrl = &mvotg->otg_ctrl;
u32 otgsc;
+ unsigned int vbus, idpin;
otgsc = readl(&mvotg->op_regs->otgsc);
- if (mvotg->pdata->vbus) {
- if (mvotg->pdata->vbus->poll() == VBUS_HIGH) {
+ if (mvotg->extern_attr & MV_USB_HAS_VBUS_DETECTION) {
+ if (mv_usb2_extern_call(mvotg->mvphy, vbus, get_vbus, &vbus))
+ return;
+ if (vbus == VBUS_HIGH) {
otg_ctrl->b_sess_vld = 1;
otg_ctrl->b_sess_end = 0;
} else {
@@ -322,8 +325,11 @@ static void mv_otg_update_inputs(struct mv_otg *mvotg)
otg_ctrl->b_sess_end = !!(otgsc & OTGSC_STS_B_SESSION_END);
}
- if (mvotg->pdata->id)
- otg_ctrl->id = !!mvotg->pdata->id->poll();
+ if (mvotg->extern_attr & MV_USB_HAS_IDPIN_DETECTION) {
+ if (mv_usb2_extern_call(mvotg->mvphy, idpin, get_idpin, &idpin))
+ return;
+ otg_ctrl->id = !!idpin;
+ }
else
otg_ctrl->id = !!(otgsc & OTGSC_STS_USB_ID);
@@ -505,7 +511,7 @@ static irqreturn_t mv_otg_irq(int irq, void *dev)
* if we have vbus, then the vbus detection for B-device
* will be done by mv_otg_inputs_irq().
*/
- if (mvotg->pdata->vbus)
+ if (mvotg->extern_attr & MV_USB_HAS_VBUS_DETECTION)
if ((otgsc & OTGSC_STS_USB_ID) &&
!(otgsc & OTGSC_INTSTS_USB_ID))
return IRQ_NONE;
@@ -518,9 +524,10 @@ static irqreturn_t mv_otg_irq(int irq, void *dev)
return IRQ_HANDLED;
}
-static irqreturn_t mv_otg_inputs_irq(int irq, void *dev)
+static int mv_otg_notifier_call(struct notifier_block *nb,
+ unsigned long val, void *v)
{
- struct mv_otg *mvotg = dev;
+ struct mv_otg *mvotg = container_of(nb, struct mv_otg, notifier);
/* The clock may disabled at this time */
if (!mvotg->active) {
@@ -530,7 +537,7 @@ static irqreturn_t mv_otg_inputs_irq(int irq, void *dev)
mv_otg_run_state_machine(mvotg, 0);
- return IRQ_HANDLED;
+ return 0;
}
static ssize_t
@@ -666,6 +673,10 @@ int mv_otg_remove(struct platform_device *pdev)
sysfs_remove_group(&mvotg->pdev->dev.kobj, &inputs_attr_group);
+ if ((mvotg->extern_attr & MV_USB_HAS_VBUS_DETECTION) ||
+ (mvotg->extern_attr & MV_USB_HAS_IDPIN_DETECTION))
+ mv_usb2_unregister_notifier(mvotg->mvphy, &mvotg->notifier);
+
if (mvotg->qwork) {
flush_workqueue(mvotg->qwork);
destroy_workqueue(mvotg->qwork);
@@ -707,6 +718,7 @@ static int mv_otg_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, mvotg);
mvotg->pdev = pdev;
+ mvotg->extern_attr = pdata->extern_attr;
mvotg->pdata = pdata;
mvotg->clknum = pdata->clknum;
@@ -773,29 +785,10 @@ static int mv_otg_probe(struct platform_device *pdev)
(struct mv_otg_regs __iomem *) ((unsigned long) mvotg->cap_regs
+ (readl(mvotg->cap_regs) & CAPLENGTH_MASK));
- if (pdata->id) {
- retval = devm_request_threaded_irq(&pdev->dev, pdata->id->irq,
- NULL, mv_otg_inputs_irq,
- IRQF_ONESHOT, "id", mvotg);
- if (retval) {
- dev_info(&pdev->dev,
- "Failed to request irq for ID\n");
- pdata->id = NULL;
- }
- }
-
- if (pdata->vbus) {
- mvotg->clock_gating = 1;
- retval = devm_request_threaded_irq(&pdev->dev, pdata->vbus->irq,
- NULL, mv_otg_inputs_irq,
- IRQF_ONESHOT, "vbus", mvotg);
- if (retval) {
- dev_info(&pdev->dev,
- "Failed to request irq for VBUS, "
- "disable clock gating\n");
- mvotg->clock_gating = 0;
- pdata->vbus = NULL;
- }
+ if ((mvotg->extern_attr & MV_USB_HAS_VBUS_DETECTION) ||
+ (mvotg->extern_attr & MV_USB_HAS_IDPIN_DETECTION)) {
+ mvotg->notifier.notifier_call = mv_otg_notifier_call;
+ mv_usb2_register_notifier(mvotg->mvphy, &mvotg->notifier);
}
if (pdata->disable_otg_clock_gating)
diff --git a/drivers/usb/otg/mv_otg.h b/drivers/usb/otg/mv_otg.h
index 7b9629a..f5bc7dd 100644
--- a/drivers/usb/otg/mv_otg.h
+++ b/drivers/usb/otg/mv_otg.h
@@ -149,6 +149,9 @@ struct mv_otg {
u32 irq_status;
u32 irq_en;
+ unsigned int extern_attr;
+ struct notifier_block notifier;
+
struct delayed_work work;
struct workqueue_struct *qwork;
--
1.7.4.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [V4 PATCH 22/26] arm: mmp: add extern chip support for brownstone
2013-01-21 10:07 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Chao Xie
` (20 preceding siblings ...)
2013-01-21 10:07 ` [V4 PATCH 21/26] usb: otg: mv_otg: " Chao Xie
@ 2013-01-21 10:07 ` Chao Xie
2013-01-21 10:07 ` [V4 PATCH 23/26] arm: mmp: add extern chip support for ttc_dkb Chao Xie
` (4 subsequent siblings)
26 siblings, 0 replies; 32+ messages in thread
From: Chao Xie @ 2013-01-21 10:07 UTC (permalink / raw)
To: linux-arm-kernel
Change the board support for usb as extern chip is supported
in marvell usb PHY driver
Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
arch/arm/mach-mmp/brownstone.c | 2 --
1 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index 90c0340..3dcf38f 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -212,10 +212,8 @@ static struct mv_usb_phy_platform_data brownstone_usb_phy_pdata = {
static struct mv_usb_platform_data brownstone_usb_pdata = {
.clknum = 1,
.clkname = mmp2_usb_clock_name,
- .vbus = NULL,
.mode = MV_USB_MODE_OTG,
.otg_force_a_bus_req = 1,
- .set_vbus = NULL,
};
#endif
#endif
--
1.7.4.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [V4 PATCH 23/26] arm: mmp: add extern chip support for ttc_dkb
2013-01-21 10:07 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Chao Xie
` (21 preceding siblings ...)
2013-01-21 10:07 ` [V4 PATCH 22/26] arm: mmp: add extern chip support for brownstone Chao Xie
@ 2013-01-21 10:07 ` Chao Xie
2013-01-21 10:07 ` [V4 PATCH 24/26] usb: gadget: mv_udc: add device tree support Chao Xie
` (3 subsequent siblings)
26 siblings, 0 replies; 32+ messages in thread
From: Chao Xie @ 2013-01-21 10:07 UTC (permalink / raw)
To: linux-arm-kernel
Change the board support for usb as extern chip is supported
in marvell usb PHY driver.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
arch/arm/mach-mmp/ttc_dkb.c | 2 --
1 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index 0962791..eb34608 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -172,10 +172,8 @@ static struct mv_usb_phy_platform_data ttc_usb_phy_pdata = {
static struct mv_usb_platform_data ttc_usb_pdata = {
.clknum = 1,
.clkname = pxa910_usb_clock_name,
- .vbus = NULL,
.mode = MV_USB_MODE_OTG,
.otg_force_a_bus_req = 1,
- .set_vbus = NULL,
};
#endif
#endif
--
1.7.4.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [V4 PATCH 24/26] usb: gadget: mv_udc: add device tree support
2013-01-21 10:07 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Chao Xie
` (22 preceding siblings ...)
2013-01-21 10:07 ` [V4 PATCH 23/26] arm: mmp: add extern chip support for ttc_dkb Chao Xie
@ 2013-01-21 10:07 ` Chao Xie
2013-01-21 10:07 ` [V4 PATCH 25/26] usb: otg: mv_otg: " Chao Xie
` (2 subsequent siblings)
26 siblings, 0 replies; 32+ messages in thread
From: Chao Xie @ 2013-01-21 10:07 UTC (permalink / raw)
To: linux-arm-kernel
In original driver, we have callbacks in platform data, and some
dynamically allocations variables in platform data.
Now, these blocks are removed, the device tree support is easier
now.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
drivers/usb/gadget/mv_udc.h | 5 +-
drivers/usb/gadget/mv_udc_core.c | 106 ++++++++++++++++++++++++++++++--------
2 files changed, 86 insertions(+), 25 deletions(-)
diff --git a/drivers/usb/gadget/mv_udc.h b/drivers/usb/gadget/mv_udc.h
index 50ae7c7..de84722 100644
--- a/drivers/usb/gadget/mv_udc.h
+++ b/drivers/usb/gadget/mv_udc.h
@@ -179,6 +179,7 @@ struct mv_udc {
int irq;
unsigned int extern_attr;
+ unsigned int mode;
struct notifier_block notifier;
struct mv_cap_regs __iomem *cap_regs;
@@ -222,11 +223,9 @@ struct mv_udc {
struct mv_usb2_phy *phy;
struct usb_phy *transceiver;
- struct mv_usb_platform_data *pdata;
-
/* some SOC has mutiple clock sources for USB*/
unsigned int clknum;
- struct clk *clk[0];
+ struct clk **clk;
};
/* endpoint data structure */
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index 4b50334..42eba77 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -34,6 +34,7 @@
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/of.h>
#include <linux/platform_data/mv_usb.h>
#include <linux/usb/mv_usb2.h>
#include <asm/unaligned.h>
@@ -2153,21 +2154,57 @@ static int mv_udc_remove(struct platform_device *pdev)
return 0;
}
+static int mv_udc_parse_dt(struct platform_device *pdev,
+ struct mv_udc *udc)
+{
+ struct device_node *np = pdev->dev.of_node;
+ unsigned int clks_num;
+ int i, ret;
+ const char *clk_name;
+
+ if (!np)
+ return 1;
+
+ clks_num = of_property_count_strings(np, "clocks");
+ if (clks_num < 0)
+ return clks_num;
+
+ udc->clk = devm_kzalloc(&pdev->dev,
+ sizeof(struct clk *) * clks_num, GFP_KERNEL);
+ if (udc->clk == NULL)
+ return -ENOMEM;
+
+ for (i = 0; i < clks_num; i++) {
+ ret = of_property_read_string_index(np, "clocks", i,
+ &clk_name);
+ if (ret)
+ return ret;
+ udc->clk[i] = devm_clk_get(&pdev->dev, clk_name);
+ if (IS_ERR(udc->clk[i]))
+ return PTR_ERR(udc->clk[i]);
+ }
+
+ udc->clknum = clks_num;
+
+ ret = of_property_read_u32(np, "extern_attr", &udc->extern_attr);
+ if (ret)
+ return ret;
+
+ ret = of_property_read_u32(np, "mode", &udc->mode);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
static int mv_udc_probe(struct platform_device *pdev)
{
- struct mv_usb_platform_data *pdata = pdev->dev.platform_data;
struct mv_udc *udc;
int retval = 0;
- int clk_i = 0;
struct resource *r;
size_t size;
- if (pdata == NULL) {
- dev_err(&pdev->dev, "missing platform_data\n");
- return -ENODEV;
- }
-
- size = sizeof(*udc) + sizeof(struct clk *) * pdata->clknum;
+ size = sizeof(*udc);
udc = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
if (udc == NULL) {
dev_err(&pdev->dev, "failed to allocate memory for udc\n");
@@ -2175,14 +2212,43 @@ static int mv_udc_probe(struct platform_device *pdev)
}
udc->done = &release_done;
- udc->extern_attr = pdata->extern_attr;
- udc->pdata = pdev->dev.platform_data;
spin_lock_init(&udc->lock);
udc->dev = pdev;
+ retval = mv_udc_parse_dt(pdev, udc);
+ if (retval > 0) {
+ /* no CONFIG_OF */
+ struct mv_usb_platform_data *pdata = pdev->dev.platform_data;
+ int clk_i = 0;
+
+ if (pdata == NULL) {
+ dev_err(&pdev->dev, "missing platform_data\n");
+ return -ENODEV;
+ }
+ udc->extern_attr = pdata->extern_attr;
+ udc->mode = pdata->mode;
+ udc->clknum = pdata->clknum;
+
+ size = sizeof(struct clk *) * udc->clknum;
+ udc->clk = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+ if (udc->clk == NULL)
+ return -ENOMEM;
+ for (clk_i = 0; clk_i < udc->clknum; clk_i++) {
+ udc->clk[clk_i] = devm_clk_get(&pdev->dev,
+ pdata->clkname[clk_i]);
+ if (IS_ERR(udc->clk[clk_i])) {
+ retval = PTR_ERR(udc->clk[clk_i]);
+ return retval;
+ }
+ }
+ } else if (retval < 0) {
+ dev_err(&pdev->dev, "error parse dt\n");
+ return retval;
+ }
+
#ifdef CONFIG_USB_OTG_UTILS
- if (pdata->mode == MV_USB_MODE_OTG) {
+ if (udc->mode == MV_USB_MODE_OTG) {
udc->transceiver = devm_usb_get_phy(&pdev->dev,
USB_PHY_TYPE_USB2);
if (IS_ERR_OR_NULL(udc->transceiver)) {
@@ -2191,17 +2257,6 @@ static int mv_udc_probe(struct platform_device *pdev)
}
}
#endif
-
- udc->clknum = pdata->clknum;
- for (clk_i = 0; clk_i < udc->clknum; clk_i++) {
- udc->clk[clk_i] = devm_clk_get(&pdev->dev,
- pdata->clkname[clk_i]);
- if (IS_ERR(udc->clk[clk_i])) {
- retval = PTR_ERR(udc->clk[clk_i]);
- return retval;
- }
- }
-
r = platform_get_resource(udc->dev, IORESOURCE_MEM, 0);
if (r == NULL) {
dev_err(&pdev->dev, "no I/O memory resource defined\n");
@@ -2466,6 +2521,12 @@ static void mv_udc_shutdown(struct platform_device *pdev)
mv_udc_disable(udc);
}
+static struct of_device_id mv_udc_dt_ids[] = {
+ { .compatible = "mrvl,mv-udc" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mv_udc_dt_ids);
+
static struct platform_driver udc_driver = {
.probe = mv_udc_probe,
.remove = mv_udc_remove,
@@ -2476,6 +2537,7 @@ static struct platform_driver udc_driver = {
#ifdef CONFIG_PM
.pm = &mv_udc_pm_ops,
#endif
+ .of_match_table = mv_udc_dt_ids,
},
};
--
1.7.4.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [V4 PATCH 25/26] usb: otg: mv_otg: add device tree support
2013-01-21 10:07 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Chao Xie
` (23 preceding siblings ...)
2013-01-21 10:07 ` [V4 PATCH 24/26] usb: gadget: mv_udc: add device tree support Chao Xie
@ 2013-01-21 10:07 ` Chao Xie
2013-01-21 10:07 ` [V4 PATCH 26/26] usb: ehci: ehci-mv: " Chao Xie
2013-01-23 11:47 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Felipe Balbi
26 siblings, 0 replies; 32+ messages in thread
From: Chao Xie @ 2013-01-21 10:07 UTC (permalink / raw)
To: linux-arm-kernel
All blocks are removed. Add the device tree support for otg.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
drivers/usb/otg/mv_otg.c | 128 +++++++++++++++++++++++++++++++++++++--------
drivers/usb/otg/mv_otg.h | 6 +-
2 files changed, 108 insertions(+), 26 deletions(-)
diff --git a/drivers/usb/otg/mv_otg.c b/drivers/usb/otg/mv_otg.c
index 379df92..3aa7fdc 100644
--- a/drivers/usb/otg/mv_otg.c
+++ b/drivers/usb/otg/mv_otg.c
@@ -17,6 +17,7 @@
#include <linux/device.h>
#include <linux/proc_fs.h>
#include <linux/clk.h>
+#include <linux/of.h>
#include <linux/workqueue.h>
#include <linux/platform_device.h>
@@ -333,7 +334,7 @@ static void mv_otg_update_inputs(struct mv_otg *mvotg)
else
otg_ctrl->id = !!(otgsc & OTGSC_STS_USB_ID);
- if (mvotg->pdata->otg_force_a_bus_req && !otg_ctrl->id)
+ if (mvotg->otg_force_a_bus_req && !otg_ctrl->id)
otg_ctrl->a_bus_req = 1;
otg_ctrl->a_sess_vld = !!(otgsc & OTGSC_STS_A_SESSION_VALID);
@@ -690,21 +691,69 @@ int mv_otg_remove(struct platform_device *pdev)
return 0;
}
+static int mv_otg_parse_dt(struct platform_device *pdev,
+ struct mv_otg *mvotg)
+{
+ struct device_node *np = pdev->dev.of_node;
+ unsigned int clks_num;
+ unsigned int val;
+ int i, ret;
+ const char *clk_name;
+
+ if (!np)
+ return 1;
+
+ clks_num = of_property_count_strings(np, "clocks");
+ if (clks_num < 0)
+ return clks_num;
+
+ mvotg->clk = devm_kzalloc(&pdev->dev,
+ sizeof(struct clk *) * clks_num, GFP_KERNEL);
+ if (mvotg->clk == NULL)
+ return -ENOMEM;
+
+ for (i = 0; i < clks_num; i++) {
+ ret = of_property_read_string_index(np, "clocks", i,
+ &clk_name);
+ if (ret)
+ return ret;
+ mvotg->clk[i] = devm_clk_get(&pdev->dev, clk_name);
+ if (IS_ERR(mvotg->clk[i]))
+ return PTR_ERR(mvotg->clk[i]);
+ }
+
+ mvotg->clknum = clks_num;
+
+ ret = of_property_read_u32(np, "extern_attr", &mvotg->extern_attr);
+ if (ret)
+ return ret;
+
+ ret = of_property_read_u32(np, "mode", &mvotg->mode);
+ if (ret)
+ return ret;
+
+ ret = of_property_read_u32(np, "force_a_bus_req", &val);
+ if (ret)
+ return ret;
+ mvotg->otg_force_a_bus_req = !!val;
+
+ ret = of_property_read_u32(np, "disable_clock_gating", &val);
+ if (ret)
+ return ret;
+ mvotg->clock_gating = !val;
+
+ return 0;
+}
+
static int mv_otg_probe(struct platform_device *pdev)
{
- struct mv_usb_platform_data *pdata = pdev->dev.platform_data;
struct mv_otg *mvotg;
struct usb_otg *otg;
struct resource *r;
- int retval = 0, clk_i, i;
+ int retval = 0, i;
size_t size;
- if (pdata == NULL) {
- dev_err(&pdev->dev, "failed to get platform data\n");
- return -ENODEV;
- }
-
- size = sizeof(*mvotg) + sizeof(struct clk *) * pdata->clknum;
+ size = sizeof(*mvotg);
mvotg = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
if (!mvotg) {
dev_err(&pdev->dev, "failed to allocate memory!\n");
@@ -718,17 +767,45 @@ static int mv_otg_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, mvotg);
mvotg->pdev = pdev;
- mvotg->extern_attr = pdata->extern_attr;
- mvotg->pdata = pdata;
- mvotg->clknum = pdata->clknum;
- for (clk_i = 0; clk_i < mvotg->clknum; clk_i++) {
- mvotg->clk[clk_i] = devm_clk_get(&pdev->dev,
+ retval = mv_otg_parse_dt(pdev, mvotg);
+ if (retval > 0) {
+ struct mv_usb_platform_data *pdata = pdev->dev.platform_data;
+ /* no CONFIG_OF */
+ int clk_i = 0;
+
+ if (pdata == NULL) {
+ dev_err(&pdev->dev, "missing platform_data\n");
+ return -ENODEV;
+ }
+ mvotg->extern_attr = pdata->extern_attr;
+ mvotg->mode = pdata->mode;
+ mvotg->clknum = pdata->clknum;
+ mvotg->otg_force_a_bus_req = pdata->otg_force_a_bus_req;
+ if (pdata->disable_otg_clock_gating)
+ mvotg->clock_gating = 0;
+
+ size = sizeof(struct clk *) * mvotg->clknum;
+ mvotg->clk = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+ if (mvotg->clk == NULL) {
+ dev_err(&pdev->dev,
+ "failed to allocate memory for clk\n");
+ return -ENOMEM;
+ }
+
+ for (clk_i = 0; clk_i < mvotg->clknum; clk_i++) {
+ mvotg->clk[clk_i] = devm_clk_get(&pdev->dev,
pdata->clkname[clk_i]);
- if (IS_ERR(mvotg->clk[clk_i])) {
- retval = PTR_ERR(mvotg->clk[clk_i]);
- return retval;
+ if (IS_ERR(mvotg->clk[clk_i])) {
+ dev_err(&pdev->dev, "failed to get clk %s\n",
+ pdata->clkname[clk_i]);
+ retval = PTR_ERR(mvotg->clk[clk_i]);
+ return retval;
+ }
}
+ } else if (retval < 0) {
+ dev_err(&pdev->dev, "error parse dt\n");
+ return retval;
}
mvotg->qwork = create_singlethread_workqueue("mv_otg_queue");
@@ -770,6 +847,7 @@ static int mv_otg_probe(struct platform_device *pdev)
}
mvotg->mvphy = mv_usb2_get_phy();
if (mvotg->mvphy == NULL) {
+ dev_err(&pdev->dev, "failed to get usb phy\n");
retval = -ENODEV;
goto err_destroy_workqueue;
}
@@ -791,9 +869,6 @@ static int mv_otg_probe(struct platform_device *pdev)
mv_usb2_register_notifier(mvotg->mvphy, &mvotg->notifier);
}
- if (pdata->disable_otg_clock_gating)
- mvotg->clock_gating = 0;
-
mv_otg_reset(mvotg);
mv_otg_init_irq(mvotg);
@@ -892,13 +967,20 @@ static int mv_otg_resume(struct platform_device *pdev)
}
#endif
+static struct of_device_id mv_otg_dt_ids[] = {
+ { .compatible = "mrvl,mv-otg" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mv_otg_dt_ids);
+
static struct platform_driver mv_otg_driver = {
.probe = mv_otg_probe,
.remove = __exit_p(mv_otg_remove),
.driver = {
- .owner = THIS_MODULE,
- .name = driver_name,
- },
+ .owner = THIS_MODULE,
+ .name = driver_name,
+ .of_match_table = mv_otg_dt_ids,
+ },
#ifdef CONFIG_PM
.suspend = mv_otg_suspend,
.resume = mv_otg_resume,
diff --git a/drivers/usb/otg/mv_otg.h b/drivers/usb/otg/mv_otg.h
index f5bc7dd..3b9356d 100644
--- a/drivers/usb/otg/mv_otg.h
+++ b/drivers/usb/otg/mv_otg.h
@@ -157,12 +157,12 @@ struct mv_otg {
spinlock_t wq_lock;
- struct mv_usb_platform_data *pdata;
-
unsigned int active;
unsigned int clock_gating;
+ unsigned int mode;
+ unsigned int otg_force_a_bus_req;
unsigned int clknum;
- struct clk *clk[0];
+ struct clk **clk;
};
#endif
--
1.7.4.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [V4 PATCH 26/26] usb: ehci: ehci-mv: add device tree support
2013-01-21 10:07 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Chao Xie
` (24 preceding siblings ...)
2013-01-21 10:07 ` [V4 PATCH 25/26] usb: otg: mv_otg: " Chao Xie
@ 2013-01-21 10:07 ` Chao Xie
2013-01-23 11:47 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Felipe Balbi
26 siblings, 0 replies; 32+ messages in thread
From: Chao Xie @ 2013-01-21 10:07 UTC (permalink / raw)
To: linux-arm-kernel
All blocks are removed. Add the device tree support for ehci.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
---
drivers/usb/host/ehci-mv.c | 105 +++++++++++++++++++++++++++++++++----------
1 files changed, 80 insertions(+), 25 deletions(-)
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index 171e145..79eca0c 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -13,6 +13,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/of.h>
#include <linux/err.h>
#include <linux/usb/otg.h>
#include <linux/usb/mv_usb2.h>
@@ -32,11 +33,9 @@ struct ehci_hcd_mv {
struct usb_phy *otg;
- struct mv_usb_platform_data *pdata;
-
/* clock source and total clock number */
unsigned int clknum;
- struct clk *clk[0];
+ struct clk **clk;
};
static void ehci_clock_enable(struct ehci_hcd_mv *ehci_mv)
@@ -138,22 +137,55 @@ static const struct hc_driver mv_ehci_hc_driver = {
.bus_resume = ehci_bus_resume,
};
+static int mv_ehci_parse_dt(struct platform_device *pdev,
+ struct ehci_hcd_mv *ehci_mv)
+{
+ struct device_node *np = pdev->dev.of_node;
+ unsigned int clks_num;
+ int i, ret;
+ const char *clk_name;
+
+ if (!np)
+ return 1;
+
+ clks_num = of_property_count_strings(np, "clocks");
+ if (clks_num < 0)
+ return clks_num;
+
+ ehci_mv->clk = devm_kzalloc(&pdev->dev,
+ sizeof(struct clk *) * clks_num, GFP_KERNEL);
+ if (ehci_mv->clk == NULL)
+ return -ENOMEM;
+
+ for (i = 0; i < clks_num; i++) {
+ ret = of_property_read_string_index(np, "clocks", i,
+ &clk_name);
+ if (ret)
+ return ret;
+ ehci_mv->clk[i] = clk_get(NULL, clk_name);
+ if (IS_ERR(ehci_mv->clk[i]))
+ return PTR_ERR(ehci_mv->clk[i]);
+ }
+
+ ehci_mv->clknum = clks_num;
+
+ ret = of_property_read_u32(np, "mode", &ehci_mv->mode);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
static int mv_ehci_probe(struct platform_device *pdev)
{
- struct mv_usb_platform_data *pdata = pdev->dev.platform_data;
struct usb_hcd *hcd;
struct ehci_hcd *ehci;
struct ehci_hcd_mv *ehci_mv;
struct resource *r;
- int clk_i, retval = -ENODEV;
+ int retval = -ENODEV;
u32 offset;
size_t size;
- if (!pdata) {
- dev_err(&pdev->dev, "missing platform_data\n");
- return -ENODEV;
- }
-
if (usb_disabled())
return -ENODEV;
@@ -161,7 +193,7 @@ static int mv_ehci_probe(struct platform_device *pdev)
if (!hcd)
return -ENOMEM;
- size = sizeof(*ehci_mv) + sizeof(struct clk *) * pdata->clknum;
+ size = sizeof(*ehci_mv);
ehci_mv = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
if (ehci_mv == NULL) {
dev_err(&pdev->dev, "cannot allocate ehci_hcd_mv\n");
@@ -170,19 +202,36 @@ static int mv_ehci_probe(struct platform_device *pdev)
}
platform_set_drvdata(pdev, ehci_mv);
- ehci_mv->pdata = pdata;
ehci_mv->hcd = hcd;
- ehci_mv->clknum = pdata->clknum;
- for (clk_i = 0; clk_i < ehci_mv->clknum; clk_i++) {
- ehci_mv->clk[clk_i] =
- devm_clk_get(&pdev->dev, pdata->clkname[clk_i]);
- if (IS_ERR(ehci_mv->clk[clk_i])) {
- dev_err(&pdev->dev, "error get clck \"%s\"\n",
- pdata->clkname[clk_i]);
- retval = PTR_ERR(ehci_mv->clk[clk_i]);
- goto err_clear_drvdata;
+ retval = mv_ehci_parse_dt(pdev, ehci_mv);
+ if (retval > 0) {
+ struct mv_usb_platform_data *pdata = pdev->dev.platform_data;
+ int clk_i = 0;
+
+ /* no CONFIG_OF */
+ if (pdata == NULL) {
+ dev_err(&pdev->dev, "missing platform_data\n");
+ return -ENODEV;
+ }
+ ehci_mv->mode = pdata->mode;
+ ehci_mv->clknum = pdata->clknum;
+
+ size = sizeof(struct clk *) * ehci_mv->clknum;
+ ehci_mv->clk = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+ if (ehci_mv->clk == NULL)
+ return -ENOMEM;
+ for (clk_i = 0; clk_i < ehci_mv->clknum; clk_i++) {
+ ehci_mv->clk[clk_i] = devm_clk_get(&pdev->dev,
+ pdata->clkname[clk_i]);
+ if (IS_ERR(ehci_mv->clk[clk_i])) {
+ retval = PTR_ERR(ehci_mv->clk[clk_i]);
+ return retval;
+ }
}
+ } else if (retval < 0) {
+ dev_err(&pdev->dev, "error parse dt\n");
+ return retval;
}
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -230,7 +279,6 @@ static int mv_ehci_probe(struct platform_device *pdev)
ehci = hcd_to_ehci(hcd);
ehci->caps = (struct ehci_caps *) ehci_mv->cap_regs;
- ehci_mv->mode = pdata->mode;
if (ehci_mv->mode == MV_USB_MODE_OTG) {
#ifdef CONFIG_USB_OTG_UTILS
ehci_mv->otg = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
@@ -334,13 +382,20 @@ static void mv_ehci_shutdown(struct platform_device *pdev)
hcd->driver->shutdown(hcd);
}
+static struct of_device_id mv_ehci_dt_ids[] = {
+ { .compatible = "mrvl,mv-ehci" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mv_ehci_dt_ids);
+
static struct platform_driver ehci_mv_driver = {
.probe = mv_ehci_probe,
.remove = mv_ehci_remove,
.shutdown = mv_ehci_shutdown,
.driver = {
- .name = "mv-ehci",
- .bus = &platform_bus_type,
- },
+ .name = "mv-ehci",
+ .bus = &platform_bus_type,
+ .of_match_table = mv_ehci_dt_ids,
+ },
.id_table = ehci_id_table,
};
--
1.7.4.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [V4 PATCH 00/26] mv-usb fix and enhancement patches
2013-01-21 10:07 ` [V4 PATCH 00/26] mv-usb fix and enhancement patches Chao Xie
` (25 preceding siblings ...)
2013-01-21 10:07 ` [V4 PATCH 26/26] usb: ehci: ehci-mv: " Chao Xie
@ 2013-01-23 11:47 ` Felipe Balbi
26 siblings, 0 replies; 32+ messages in thread
From: Felipe Balbi @ 2013-01-23 11:47 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Mon, Jan 21, 2013 at 05:07:18AM -0500, Chao Xie wrote:
> The patches are divied into 4 parts
> 1. bug fixes
> usb: gadget: mv_udc: use udc_start and udc_stop functions
> usb: gadget: mv_udc: use devm_xxx for probe
> usb: gadget: mv_udc: fix the warning of mv_udc_remove
> usb: otg: mv_otg: use devm_xxx for probe
> usb: host: ehci-mv: remove unused variable
> usb: gadget: mv_udc: fix the value of tranceiver
> usb: gadget: mv_udc: make mv_udc depends on ARCH_MMP or ARCH_PXA
> Above patches are bug fixes.
>
> 2. PHY driver
> To remove the callbacks in the platform data, a usb PHY driver
> for marvell udc/otg/ehci is written.
> For device tree support, it is not good to pass the callback
> pointers by platform data. The PHY driver also removes the
> block.
>
> usb: phy: mv_usb2: add PHY driver for marvell usb2 controller
> usb: gadget: mv_udc: use PHY driver for udc
> usb: ehci: ehci-mv: use PHY driver for ehci
> usb: otg: mv_otg: use PHY driver for otg
> Above patches are marvell usb PHY driver support.
>
> arm: mmp2: change the defintion of usb devices
> arm: pxa910: change the defintion of usb devices
> arm: brownstone: add usb support for the board
> arm: ttc_dkb: add usb support
> arm: mmp: remove the usb phy setting
> arm: mmp: remove usb devices from pxa168
> Above patches are for SOC/board support for marvell usb PHY
> driver.
>
> 3. external chip support
> The marvell usb controller can detect the vbus/idpin, but it
> need PHY and usb clocks to be enabled.
> Based on measurement it will import 15mA current, and increase
> the power when the usb is not used.
> Using a external chip to detect vbus/idpin changes will save
> the power.
> In fact the marvell PMIC 88pm860x and 88pm80x can do it. The
> drivers are located at drivers/mfd.
> So add a middle layer in the marvell usb PHY driver.
> PMIC call the APIs in middle driver to registers the callback
> for vbus/idpin detection/query
> udc/otg/ehci driver will call the APIs to get vbus/idpin changes
> and query the states of the vbus/idpin.
> usb: phy: mv_usb2_phy: add externel chip support
> usb: gadget: mv_udc: add extern chip support
> usb: ehci: ehci-mv: add extern chip support
> usb: otg: mv_otg: add extern chip support
> Above patches are the middle layer suppor for udc/otg/ehci
>
> arm: mmp: add extern chip support for brownstone
> arm: mmp: add extern chip support for ttc_dkb
> Above patches are corresponding board file changes
>
> 4. device tree support
> After removing the callbacks in platform data, and the not
> constant variables in platform data. All the information needed
> by udc/otg/ehci driver are constant.
>
> usb: gadget: mv_udc: add device tree support
> usb: otg: mv_otg: add device tree support
> usb: ehci: ehci-mv: add device tree support
> Above patches are device tree support for udc/otg/ehci driver.
this series will be delayed for v3.10. Sorry
--
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130123/85fa8727/attachment.sig>
^ permalink raw reply [flat|nested] 32+ messages in thread