* [PATCH] OMAP: omap4-panda: add UART2 muxing for WiLink shared transport
@ 2013-01-21 11:14 Luciano Coelho
2013-01-21 18:21 ` Tony Lindgren
0 siblings, 1 reply; 2+ messages in thread
From: Luciano Coelho @ 2013-01-21 11:14 UTC (permalink / raw)
To: linux-arm-kernel
Add the UART2 muxing data to the board file (this used to be,
erroneously, done in the bootloader).
Cc: stable <stable@vger.kernel.org> [3.7]
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
arch/arm/mach-omap2/board-omap4panda.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 5c8e9ce..769c1fe 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -397,6 +397,12 @@ static struct omap_board_mux board_mux[] __initdata = {
OMAP_PULL_ENA),
OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ /* UART2 - BT/FM/GPS shared transport */
+ OMAP4_MUX(UART2_CTS, OMAP_PIN_INPUT | OMAP_MUX_MODE0),
+ OMAP4_MUX(UART2_RTS, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+ OMAP4_MUX(UART2_RX, OMAP_PIN_INPUT | OMAP_MUX_MODE0),
+ OMAP4_MUX(UART2_TX, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
--
1.7.10.4
^ permalink raw reply related [flat|nested] 2+ messages in thread* [PATCH] OMAP: omap4-panda: add UART2 muxing for WiLink shared transport
2013-01-21 11:14 [PATCH] OMAP: omap4-panda: add UART2 muxing for WiLink shared transport Luciano Coelho
@ 2013-01-21 18:21 ` Tony Lindgren
0 siblings, 0 replies; 2+ messages in thread
From: Tony Lindgren @ 2013-01-21 18:21 UTC (permalink / raw)
To: linux-arm-kernel
* Luciano Coelho <coelho@ti.com> [130121 03:18]:
> Add the UART2 muxing data to the board file (this used to be,
> erroneously, done in the bootloader).
>
> Cc: stable <stable@vger.kernel.org> [3.7]
> Signed-off-by: Luciano Coelho <coelho@ti.com>
Thanks applying into omap-for-v3.8-rc4/fixes.
Regards,
Tony
> ---
> arch/arm/mach-omap2/board-omap4panda.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
> index 5c8e9ce..769c1fe 100644
> --- a/arch/arm/mach-omap2/board-omap4panda.c
> +++ b/arch/arm/mach-omap2/board-omap4panda.c
> @@ -397,6 +397,12 @@ static struct omap_board_mux board_mux[] __initdata = {
> OMAP_PULL_ENA),
> OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
>
> + /* UART2 - BT/FM/GPS shared transport */
> + OMAP4_MUX(UART2_CTS, OMAP_PIN_INPUT | OMAP_MUX_MODE0),
> + OMAP4_MUX(UART2_RTS, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
> + OMAP4_MUX(UART2_RX, OMAP_PIN_INPUT | OMAP_MUX_MODE0),
> + OMAP4_MUX(UART2_TX, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
> +
> { .reg_offset = OMAP_MUX_TERMINATOR },
> };
>
> --
> 1.7.10.4
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-01-21 18:21 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-01-21 11:14 [PATCH] OMAP: omap4-panda: add UART2 muxing for WiLink shared transport Luciano Coelho
2013-01-21 18:21 ` Tony Lindgren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).