From mboxrd@z Thu Jan 1 00:00:00 1970 From: s.hauer@pengutronix.de (Sascha Hauer) Date: Tue, 22 Jan 2013 09:27:12 +0100 Subject: [PATCH V2 0/5] W1: Support onewire master on i.MX53 In-Reply-To: <20130116145749.24249.678.stgit@localhost> References: <20130116145749.24249.678.stgit@localhost> Message-ID: <20130122082712.GJ1906@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, Jan 16, 2013 at 03:57:49PM +0100, Martin Fuzzey wrote: > W1: Support onewire master on i.MX53 > * Add device tree and pinctrl support to the MXC master driver > * Convert to use devm_ > * Add i.MX53 clocks > * Add i.MX53 device tree entries > > Changes since V1 > * Applied comments from Sascha Hauer: > * Move patch converting driver to devm_ before the one adding devm_ based pinctrl > * Fix existing unbalanced clk_prepare_enable/clk_disable_unprepare > in probe error path > > * Place DT patch last since it includes pinctrls for driver. This looks good now. Acked-by: Sascha Hauer You might have to send this again in two series, one for the w1 maintainer and one for arm-soc. Both series should be sufficiently orthogonal. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |