[PATCH 06/26] mfd: ab8500-sysctrl: Provide configuration for SysClkReqRfClkBuf registers

[lee.jones@linaro.org (Lee Jones)]

On Mon, 28 Jan 2013, Samuel Ortiz wrote:

> Hi Lee, Kennet,
> 
> On Tue, Jan 15, 2013 at 12:55:46PM +0000, Lee Jones wrote:
> > From: Kennet Wallden <kennet.wallden@stericsson.com>
> > 
> > Add the possibility to pass configuration settings for
> > SysCl1kReqRfClkBuf to SysClk8ReqRfClkBuf via platform data.
> > 
> > Signed-off-by: Lee Jones <lee.jones@linaro.org>
> > Signed-off-by: Kennet Wallden <kennet.wallden@stericsson.com>
> > Reviewed-by: Karl-Johan PERNTZ <karl-johan.perntz@stericsson.com>
> > Reviewed-by: Bengt JONSSON <bengt.g.jonsson@stericsson.com>
> > ---
> >  drivers/mfd/ab8500-sysctrl.c              |   25 +++++++++++++++++++++++++
> >  include/linux/mfd/abx500/ab8500-sysctrl.h |    5 +++++
> >  include/linux/mfd/abx500/ab8500.h         |    2 ++
> >  3 files changed, 32 insertions(+)
> > 
> > diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c
> > index cf58f69..19a024e 100644
> > --- a/drivers/mfd/ab8500-sysctrl.c
> > +++ b/drivers/mfd/ab8500-sysctrl.c
> > @@ -113,11 +113,36 @@ int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value)
> >  static int __devinit ab8500_sysctrl_probe(struct platform_device *pdev)
> >  {
> >  	struct ab8500_platform_data *plat;
> > +	struct ab8500_sysctrl_platform_data *pdata;
> >  
> >  	sysctrl_dev = &pdev->dev;
> >  	plat = dev_get_platdata(pdev->dev.parent);
> >  	if (plat->pm_power_off)
> >  		pm_power_off = ab8500_power_off;
> > +
> > +	pdata = plat->sysctrl;
> > +
> > +	if (pdata) {
> > +		int ret;
> > +		int i;
> > +		int j;
> Cosmetic 
> int i, j, ret;

Hmmm... this is how I'd prefer it too, but other maintainers prefer
one-per-line. It would be better if we could standardise it somewhere
to prevent unnecessary fixups.

> > +		for (i = AB8500_SYSCLKREQ1RFCLKBUF;
> > +		     i <= AB8500_SYSCLKREQ8RFCLKBUF; i++) {
> > +			j = i - AB8500_SYSCLKREQ1RFCLKBUF;
> > +			ret = ab8500_sysctrl_write(i, 0xff,
> > +						   pdata->initial_req_buf_config[j]);
> > +			dev_dbg(&pdev->dev,
> > +				"Setting SysClkReq%dRfClkBuf 0x%X\n",
> > +				j + 1,
> > +				pdata->initial_req_buf_config[j]);
> > +			if (ret < 0) {
> > +				dev_err(&pdev->dev,
> > +					"unable to set sysClkReq%dRfClkBuf: "
> > +					"%d\n", j + 1, ret);
> > +			}
> > +		}
> > +	}
> > +
> >  	return 0;
> >  }
> >  
> > diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h
> > index 10eb509..ebf12e7 100644
> > --- a/include/linux/mfd/abx500/ab8500-sysctrl.h
> > +++ b/include/linux/mfd/abx500/ab8500-sysctrl.h
> > @@ -37,6 +37,11 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits)
> >  	return ab8500_sysctrl_write(reg, bits, 0);
> >  }
> >  
> > +/* Configuration data for SysClkReq1RfClkBuf - SysClkReq8RfClkBuf */
> > +struct ab8500_sysctrl_platform_data {
> > +	u8 initial_req_buf_config[8];
> > +};
> > +
> >  /* Registers */
> >  #define AB8500_TURNONSTATUS		0x100
> >  #define AB8500_RESETSTATUS		0x101
> > diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h
> > index 96840c4..3f4e6d1 100644
> > --- a/include/linux/mfd/abx500/ab8500.h
> > +++ b/include/linux/mfd/abx500/ab8500.h
> > @@ -270,6 +270,7 @@ struct regulator_reg_init;
> >  struct regulator_init_data;
> >  struct ab8500_gpio_platform_data;
> >  struct ab8500_codec_platform_data;
> > +struct ab8500_sysctrl_platform_data;
> >  
> >  /**
> >   * struct ab8500_platform_data - AB8500 platform data
> > @@ -291,6 +292,7 @@ struct ab8500_platform_data {
> >  	struct regulator_init_data *regulator;
> >  	struct ab8500_gpio_platform_data *gpio;
> >  	struct ab8500_codec_platform_data *codec;
> > +	struct ab8500_sysctrl_platform_data *sysctrl;
> >  };
> >  
> >  extern int __devinit ab8500_init(struct ab8500 *ab8500,
> 

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog