[PATCH] Add USB of helpers and use them in the chipidea driver

[PATCH] Add USB of helpers and use them in the chipidea driver

[Sascha Hauer]

This is the 2nd version of the USB of helper patch, this time with
adding support for the chipidea driver for the new properties.

Kishon, I decided against adding an extra Kconfig option for the
OF helpers since I found out the USB stuff already has enough options ;)

The helpers are now in usb-common.c which seems an appropriate place
for them. For the phy_type helpers I had a look again and saw that
it is not really phy specific, the PORTSC registers in the chipidea
driver have to be configured even without phy support compiled in.

Sascha

----------------------------------------------------------------
Michael Grzeschik (3):
      usb: add devicetree helpers for determining dr_mode and phy_type
      usb: chipidea: ci13xxx-imx: create dynamic platformdata
      usb: chipidea: add PTW and PTS handling

Sascha Hauer (2):
      USB chipidea: introduce dual role mode pdata flags
      USB chipidea i.MX: introduce dr_mode property

 .../devicetree/bindings/usb/ci13xxx-imx.txt        |    6 ++
 drivers/usb/chipidea/bits.h                        |    7 ++
 drivers/usb/chipidea/ci13xxx_imx.c                 |   29 +++++---
 drivers/usb/chipidea/core.c                        |   61 +++++++++++++++--
 drivers/usb/usb-common.c                           |   69 ++++++++++++++++++++
 include/linux/usb/chipidea.h                       |    3 +-
 include/linux/usb/of.h                             |   27 ++++++++
 include/linux/usb/otg.h                            |    7 ++
 include/linux/usb/phy.h                            |    9 +++
 9 files changed, 201 insertions(+), 17 deletions(-)
 create mode 100644 include/linux/usb/of.h

[PATCH 1/6] USB: move bulk of otg/otg.c to phy/phy.c

[Sascha Hauer]

Most of otg/otg.c is not otg specific, but phy specific, so move it
to the phy directory.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/usb/otg/otg.c    |  423 ---------------------------------------------
 drivers/usb/phy/Makefile |    1 +
 drivers/usb/phy/phy.c    |  424 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 425 insertions(+), 423 deletions(-)
 create mode 100644 drivers/usb/phy/phy.c

diff --git a/drivers/usb/otg/otg.c b/drivers/usb/otg/otg.c
index e181439..358cfd9 100644
--- a/drivers/usb/otg/otg.c
+++ b/drivers/usb/otg/otg.c
@@ -8,432 +8,9 @@
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */
-
-#include <linux/kernel.h>
 #include <linux/export.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/of.h>
-
 #include <linux/usb/otg.h>
 
-static LIST_HEAD(phy_list);
-static LIST_HEAD(phy_bind_list);
-static DEFINE_SPINLOCK(phy_lock);
-
-static struct usb_phy *__usb_find_phy(struct list_head *list,
-	enum usb_phy_type type)
-{
-	struct usb_phy  *phy = NULL;
-
-	list_for_each_entry(phy, list, head) {
-		if (phy->type != type)
-			continue;
-
-		return phy;
-	}
-
-	return ERR_PTR(-ENODEV);
-}
-
-static struct usb_phy *__usb_find_phy_dev(struct device *dev,
-	struct list_head *list, u8 index)
-{
-	struct usb_phy_bind *phy_bind = NULL;
-
-	list_for_each_entry(phy_bind, list, list) {
-		if (!(strcmp(phy_bind->dev_name, dev_name(dev))) &&
-				phy_bind->index == index) {
-			if (phy_bind->phy)
-				return phy_bind->phy;
-			else
-				return ERR_PTR(-EPROBE_DEFER);
-		}
-	}
-
-	return ERR_PTR(-ENODEV);
-}
-
-static struct usb_phy *__of_usb_find_phy(struct device_node *node)
-{
-	struct usb_phy  *phy;
-
-	list_for_each_entry(phy, &phy_list, head) {
-		if (node != phy->dev->of_node)
-			continue;
-
-		return phy;
-	}
-
-	return ERR_PTR(-ENODEV);
-}
-
-static void devm_usb_phy_release(struct device *dev, void *res)
-{
-	struct usb_phy *phy = *(struct usb_phy **)res;
-
-	usb_put_phy(phy);
-}
-
-static int devm_usb_phy_match(struct device *dev, void *res, void *match_data)
-{
-	return res == match_data;
-}
-
-/**
- * devm_usb_get_phy - find the USB PHY
- * @dev - device that requests this phy
- * @type - the type of the phy the controller requires
- *
- * Gets the phy using usb_get_phy(), and associates a device with it using
- * devres. On driver detach, release function is invoked on the devres data,
- * then, devres data is freed.
- *
- * For use by USB host and peripheral drivers.
- */
-struct usb_phy *devm_usb_get_phy(struct device *dev, enum usb_phy_type type)
-{
-	struct usb_phy **ptr, *phy;
-
-	ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
-	if (!ptr)
-		return NULL;
-
-	phy = usb_get_phy(type);
-	if (!IS_ERR(phy)) {
-		*ptr = phy;
-		devres_add(dev, ptr);
-	} else
-		devres_free(ptr);
-
-	return phy;
-}
-EXPORT_SYMBOL(devm_usb_get_phy);
-
-/**
- * usb_get_phy - find the USB PHY
- * @type - the type of the phy the controller requires
- *
- * Returns the phy driver, after getting a refcount to it; or
- * -ENODEV if there is no such phy.  The caller is responsible for
- * calling usb_put_phy() to release that count.
- *
- * For use by USB host and peripheral drivers.
- */
-struct usb_phy *usb_get_phy(enum usb_phy_type type)
-{
-	struct usb_phy	*phy = NULL;
-	unsigned long	flags;
-
-	spin_lock_irqsave(&phy_lock, flags);
-
-	phy = __usb_find_phy(&phy_list, type);
-	if (IS_ERR(phy)) {
-		pr_err("unable to find transceiver of type %s\n",
-			usb_phy_type_string(type));
-		goto err0;
-	}
-
-	get_device(phy->dev);
-
-err0:
-	spin_unlock_irqrestore(&phy_lock, flags);
-
-	return phy;
-}
-EXPORT_SYMBOL(usb_get_phy);
-
- /**
- * devm_usb_get_phy_by_phandle - find the USB PHY by phandle
- * @dev - device that requests this phy
- * @phandle - name of the property holding the phy phandle value
- * @index - the index of the phy
- *
- * Returns the phy driver associated with the given phandle value,
- * after getting a refcount to it, -ENODEV if there is no such phy or
- * -EPROBE_DEFER if there is a phandle to the phy, but the device is
- * not yet loaded. While at that, it also associates the device with
- * the phy using devres. On driver detach, release function is invoked
- * on the devres data, then, devres data is freed.
- *
- * For use by USB host and peripheral drivers.
- */
-struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev,
-	const char *phandle, u8 index)
-{
-	struct usb_phy	*phy = ERR_PTR(-ENOMEM), **ptr;
-	unsigned long	flags;
-	struct device_node *node;
-
-	if (!dev->of_node) {
-		dev_dbg(dev, "device does not have a device node entry\n");
-		return ERR_PTR(-EINVAL);
-	}
-
-	node = of_parse_phandle(dev->of_node, phandle, index);
-	if (!node) {
-		dev_dbg(dev, "failed to get %s phandle in %s node\n", phandle,
-			dev->of_node->full_name);
-		return ERR_PTR(-ENODEV);
-	}
-
-	ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
-	if (!ptr) {
-		dev_dbg(dev, "failed to allocate memory for devres\n");
-		goto err0;
-	}
-
-	spin_lock_irqsave(&phy_lock, flags);
-
-	phy = __of_usb_find_phy(node);
-	if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
-		phy = ERR_PTR(-EPROBE_DEFER);
-		devres_free(ptr);
-		goto err1;
-	}
-
-	*ptr = phy;
-	devres_add(dev, ptr);
-
-	get_device(phy->dev);
-
-err1:
-	spin_unlock_irqrestore(&phy_lock, flags);
-
-err0:
-	of_node_put(node);
-
-	return phy;
-}
-EXPORT_SYMBOL(devm_usb_get_phy_by_phandle);
-
-/**
- * usb_get_phy_dev - find the USB PHY
- * @dev - device that requests this phy
- * @index - the index of the phy
- *
- * Returns the phy driver, after getting a refcount to it; or
- * -ENODEV if there is no such phy.  The caller is responsible for
- * calling usb_put_phy() to release that count.
- *
- * For use by USB host and peripheral drivers.
- */
-struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index)
-{
-	struct usb_phy	*phy = NULL;
-	unsigned long	flags;
-
-	spin_lock_irqsave(&phy_lock, flags);
-
-	phy = __usb_find_phy_dev(dev, &phy_bind_list, index);
-	if (IS_ERR(phy)) {
-		pr_err("unable to find transceiver\n");
-		goto err0;
-	}
-
-	get_device(phy->dev);
-
-err0:
-	spin_unlock_irqrestore(&phy_lock, flags);
-
-	return phy;
-}
-EXPORT_SYMBOL(usb_get_phy_dev);
-
-/**
- * devm_usb_get_phy_dev - find the USB PHY using device ptr and index
- * @dev - device that requests this phy
- * @index - the index of the phy
- *
- * Gets the phy using usb_get_phy_dev(), and associates a device with it using
- * devres. On driver detach, release function is invoked on the devres data,
- * then, devres data is freed.
- *
- * For use by USB host and peripheral drivers.
- */
-struct usb_phy *devm_usb_get_phy_dev(struct device *dev, u8 index)
-{
-	struct usb_phy **ptr, *phy;
-
-	ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
-	if (!ptr)
-		return NULL;
-
-	phy = usb_get_phy_dev(dev, index);
-	if (!IS_ERR(phy)) {
-		*ptr = phy;
-		devres_add(dev, ptr);
-	} else
-		devres_free(ptr);
-
-	return phy;
-}
-EXPORT_SYMBOL(devm_usb_get_phy_dev);
-
-/**
- * devm_usb_put_phy - release the USB PHY
- * @dev - device that wants to release this phy
- * @phy - the phy returned by devm_usb_get_phy()
- *
- * destroys the devres associated with this phy and invokes usb_put_phy
- * to release the phy.
- *
- * For use by USB host and peripheral drivers.
- */
-void devm_usb_put_phy(struct device *dev, struct usb_phy *phy)
-{
-	int r;
-
-	r = devres_destroy(dev, devm_usb_phy_release, devm_usb_phy_match, phy);
-	dev_WARN_ONCE(dev, r, "couldn't find PHY resource\n");
-}
-EXPORT_SYMBOL(devm_usb_put_phy);
-
-/**
- * usb_put_phy - release the USB PHY
- * @x: the phy returned by usb_get_phy()
- *
- * Releases a refcount the caller received from usb_get_phy().
- *
- * For use by USB host and peripheral drivers.
- */
-void usb_put_phy(struct usb_phy *x)
-{
-	if (x)
-		put_device(x->dev);
-}
-EXPORT_SYMBOL(usb_put_phy);
-
-/**
- * usb_add_phy - declare the USB PHY
- * @x: the USB phy to be used; or NULL
- * @type - the type of this PHY
- *
- * This call is exclusively for use by phy drivers, which
- * coordinate the activities of drivers for host and peripheral
- * controllers, and in some cases for VBUS current regulation.
- */
-int usb_add_phy(struct usb_phy *x, enum usb_phy_type type)
-{
-	int		ret = 0;
-	unsigned long	flags;
-	struct usb_phy	*phy;
-
-	if (x->type != USB_PHY_TYPE_UNDEFINED) {
-		dev_err(x->dev, "not accepting initialized PHY %s\n", x->label);
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&phy_lock, flags);
-
-	list_for_each_entry(phy, &phy_list, head) {
-		if (phy->type == type) {
-			ret = -EBUSY;
-			dev_err(x->dev, "transceiver type %s already exists\n",
-						usb_phy_type_string(type));
-			goto out;
-		}
-	}
-
-	x->type = type;
-	list_add_tail(&x->head, &phy_list);
-
-out:
-	spin_unlock_irqrestore(&phy_lock, flags);
-	return ret;
-}
-EXPORT_SYMBOL(usb_add_phy);
-
-/**
- * usb_add_phy_dev - declare the USB PHY
- * @x: the USB phy to be used; or NULL
- *
- * This call is exclusively for use by phy drivers, which
- * coordinate the activities of drivers for host and peripheral
- * controllers, and in some cases for VBUS current regulation.
- */
-int usb_add_phy_dev(struct usb_phy *x)
-{
-	struct usb_phy_bind *phy_bind;
-	unsigned long flags;
-
-	if (!x->dev) {
-		dev_err(x->dev, "no device provided for PHY\n");
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&phy_lock, flags);
-	list_for_each_entry(phy_bind, &phy_bind_list, list)
-		if (!(strcmp(phy_bind->phy_dev_name, dev_name(x->dev))))
-			phy_bind->phy = x;
-
-	list_add_tail(&x->head, &phy_list);
-
-	spin_unlock_irqrestore(&phy_lock, flags);
-	return 0;
-}
-EXPORT_SYMBOL(usb_add_phy_dev);
-
-/**
- * usb_remove_phy - remove the OTG PHY
- * @x: the USB OTG PHY to be removed;
- *
- * This reverts the effects of usb_add_phy
- */
-void usb_remove_phy(struct usb_phy *x)
-{
-	unsigned long	flags;
-	struct usb_phy_bind *phy_bind;
-
-	spin_lock_irqsave(&phy_lock, flags);
-	if (x) {
-		list_for_each_entry(phy_bind, &phy_bind_list, list)
-			if (phy_bind->phy == x)
-				phy_bind->phy = NULL;
-		list_del(&x->head);
-	}
-	spin_unlock_irqrestore(&phy_lock, flags);
-}
-EXPORT_SYMBOL(usb_remove_phy);
-
-/**
- * usb_bind_phy - bind the phy and the controller that uses the phy
- * @dev_name: the device name of the device that will bind to the phy
- * @index: index to specify the port number
- * @phy_dev_name: the device name of the phy
- *
- * Fills the phy_bind structure with the dev_name and phy_dev_name. This will
- * be used when the phy driver registers the phy and when the controller
- * requests this phy.
- *
- * To be used by platform specific initialization code.
- */
-int __init usb_bind_phy(const char *dev_name, u8 index,
-				const char *phy_dev_name)
-{
-	struct usb_phy_bind *phy_bind;
-	unsigned long flags;
-
-	phy_bind = kzalloc(sizeof(*phy_bind), GFP_KERNEL);
-	if (!phy_bind) {
-		pr_err("phy_bind(): No memory for phy_bind");
-		return -ENOMEM;
-	}
-
-	phy_bind->dev_name = dev_name;
-	phy_bind->phy_dev_name = phy_dev_name;
-	phy_bind->index = index;
-
-	spin_lock_irqsave(&phy_lock, flags);
-	list_add_tail(&phy_bind->list, &phy_bind_list);
-	spin_unlock_irqrestore(&phy_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(usb_bind_phy);
-
 const char *otg_state_string(enum usb_otg_state state)
 {
 	switch (state) {
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index b13faa1..9fa6327 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -4,6 +4,7 @@
 
 ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
 
+obj-$(CONFIG_USB_OTG_UTILS)		+= phy.o
 obj-$(CONFIG_OMAP_USB2)			+= omap-usb2.o
 obj-$(CONFIG_OMAP_USB3)			+= omap-usb3.o
 obj-$(CONFIG_OMAP_CONTROL_USB)		+= omap-control-usb.o
diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
new file mode 100644
index 0000000..ef35eb0
--- /dev/null
+++ b/drivers/usb/phy/phy.c
@@ -0,0 +1,424 @@
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#include <linux/usb/phy.h>
+
+static LIST_HEAD(phy_list);
+static LIST_HEAD(phy_bind_list);
+static DEFINE_SPINLOCK(phy_lock);
+
+static struct usb_phy *__usb_find_phy(struct list_head *list,
+	enum usb_phy_type type)
+{
+	struct usb_phy  *phy = NULL;
+
+	list_for_each_entry(phy, list, head) {
+		if (phy->type != type)
+			continue;
+
+		return phy;
+	}
+
+	return ERR_PTR(-ENODEV);
+}
+
+static struct usb_phy *__usb_find_phy_dev(struct device *dev,
+	struct list_head *list, u8 index)
+{
+	struct usb_phy_bind *phy_bind = NULL;
+
+	list_for_each_entry(phy_bind, list, list) {
+		if (!(strcmp(phy_bind->dev_name, dev_name(dev))) &&
+				phy_bind->index == index) {
+			if (phy_bind->phy)
+				return phy_bind->phy;
+			else
+				return ERR_PTR(-EPROBE_DEFER);
+		}
+	}
+
+	return ERR_PTR(-ENODEV);
+}
+
+static struct usb_phy *__of_usb_find_phy(struct device_node *node)
+{
+	struct usb_phy  *phy;
+
+	list_for_each_entry(phy, &phy_list, head) {
+		if (node != phy->dev->of_node)
+			continue;
+
+		return phy;
+	}
+
+	return ERR_PTR(-ENODEV);
+}
+
+static void devm_usb_phy_release(struct device *dev, void *res)
+{
+	struct usb_phy *phy = *(struct usb_phy **)res;
+
+	usb_put_phy(phy);
+}
+
+static int devm_usb_phy_match(struct device *dev, void *res, void *match_data)
+{
+	return res == match_data;
+}
+
+/**
+ * devm_usb_get_phy - find the USB PHY
+ * @dev - device that requests this phy
+ * @type - the type of the phy the controller requires
+ *
+ * Gets the phy using usb_get_phy(), and associates a device with it using
+ * devres. On driver detach, release function is invoked on the devres data,
+ * then, devres data is freed.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *devm_usb_get_phy(struct device *dev, enum usb_phy_type type)
+{
+	struct usb_phy **ptr, *phy;
+
+	ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return NULL;
+
+	phy = usb_get_phy(type);
+	if (!IS_ERR(phy)) {
+		*ptr = phy;
+		devres_add(dev, ptr);
+	} else
+		devres_free(ptr);
+
+	return phy;
+}
+EXPORT_SYMBOL(devm_usb_get_phy);
+
+/**
+ * usb_get_phy - find the USB PHY
+ * @type - the type of the phy the controller requires
+ *
+ * Returns the phy driver, after getting a refcount to it; or
+ * -ENODEV if there is no such phy.  The caller is responsible for
+ * calling usb_put_phy() to release that count.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *usb_get_phy(enum usb_phy_type type)
+{
+	struct usb_phy	*phy = NULL;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&phy_lock, flags);
+
+	phy = __usb_find_phy(&phy_list, type);
+	if (IS_ERR(phy)) {
+		pr_err("unable to find transceiver of type %s\n",
+			usb_phy_type_string(type));
+		goto err0;
+	}
+
+	get_device(phy->dev);
+
+err0:
+	spin_unlock_irqrestore(&phy_lock, flags);
+
+	return phy;
+}
+EXPORT_SYMBOL(usb_get_phy);
+
+ /**
+ * devm_usb_get_phy_by_phandle - find the USB PHY by phandle
+ * @dev - device that requests this phy
+ * @phandle - name of the property holding the phy phandle value
+ * @index - the index of the phy
+ *
+ * Returns the phy driver associated with the given phandle value,
+ * after getting a refcount to it, -ENODEV if there is no such phy or
+ * -EPROBE_DEFER if there is a phandle to the phy, but the device is
+ * not yet loaded. While at that, it also associates the device with
+ * the phy using devres. On driver detach, release function is invoked
+ * on the devres data, then, devres data is freed.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev,
+	const char *phandle, u8 index)
+{
+	struct usb_phy	*phy = ERR_PTR(-ENOMEM), **ptr;
+	unsigned long	flags;
+	struct device_node *node;
+
+	if (!dev->of_node) {
+		dev_dbg(dev, "device does not have a device node entry\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	node = of_parse_phandle(dev->of_node, phandle, index);
+	if (!node) {
+		dev_dbg(dev, "failed to get %s phandle in %s node\n", phandle,
+			dev->of_node->full_name);
+		return ERR_PTR(-ENODEV);
+	}
+
+	ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr) {
+		dev_dbg(dev, "failed to allocate memory for devres\n");
+		goto err0;
+	}
+
+	spin_lock_irqsave(&phy_lock, flags);
+
+	phy = __of_usb_find_phy(node);
+	if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
+		phy = ERR_PTR(-EPROBE_DEFER);
+		devres_free(ptr);
+		goto err1;
+	}
+
+	*ptr = phy;
+	devres_add(dev, ptr);
+
+	get_device(phy->dev);
+
+err1:
+	spin_unlock_irqrestore(&phy_lock, flags);
+
+err0:
+	of_node_put(node);
+
+	return phy;
+}
+EXPORT_SYMBOL(devm_usb_get_phy_by_phandle);
+
+/**
+ * usb_get_phy_dev - find the USB PHY
+ * @dev - device that requests this phy
+ * @index - the index of the phy
+ *
+ * Returns the phy driver, after getting a refcount to it; or
+ * -ENODEV if there is no such phy.  The caller is responsible for
+ * calling usb_put_phy() to release that count.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index)
+{
+	struct usb_phy	*phy = NULL;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&phy_lock, flags);
+
+	phy = __usb_find_phy_dev(dev, &phy_bind_list, index);
+	if (IS_ERR(phy)) {
+		pr_err("unable to find transceiver\n");
+		goto err0;
+	}
+
+	get_device(phy->dev);
+
+err0:
+	spin_unlock_irqrestore(&phy_lock, flags);
+
+	return phy;
+}
+EXPORT_SYMBOL(usb_get_phy_dev);
+
+/**
+ * devm_usb_get_phy_dev - find the USB PHY using device ptr and index
+ * @dev - device that requests this phy
+ * @index - the index of the phy
+ *
+ * Gets the phy using usb_get_phy_dev(), and associates a device with it using
+ * devres. On driver detach, release function is invoked on the devres data,
+ * then, devres data is freed.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *devm_usb_get_phy_dev(struct device *dev, u8 index)
+{
+	struct usb_phy **ptr, *phy;
+
+	ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return NULL;
+
+	phy = usb_get_phy_dev(dev, index);
+	if (!IS_ERR(phy)) {
+		*ptr = phy;
+		devres_add(dev, ptr);
+	} else
+		devres_free(ptr);
+
+	return phy;
+}
+EXPORT_SYMBOL(devm_usb_get_phy_dev);
+
+/**
+ * devm_usb_put_phy - release the USB PHY
+ * @dev - device that wants to release this phy
+ * @phy - the phy returned by devm_usb_get_phy()
+ *
+ * destroys the devres associated with this phy and invokes usb_put_phy
+ * to release the phy.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+void devm_usb_put_phy(struct device *dev, struct usb_phy *phy)
+{
+	int r;
+
+	r = devres_destroy(dev, devm_usb_phy_release, devm_usb_phy_match, phy);
+	dev_WARN_ONCE(dev, r, "couldn't find PHY resource\n");
+}
+EXPORT_SYMBOL(devm_usb_put_phy);
+
+/**
+ * usb_put_phy - release the USB PHY
+ * @x: the phy returned by usb_get_phy()
+ *
+ * Releases a refcount the caller received from usb_get_phy().
+ *
+ * For use by USB host and peripheral drivers.
+ */
+void usb_put_phy(struct usb_phy *x)
+{
+	if (x)
+		put_device(x->dev);
+}
+EXPORT_SYMBOL(usb_put_phy);
+
+/**
+ * usb_add_phy - declare the USB PHY
+ * @x: the USB phy to be used; or NULL
+ * @type - the type of this PHY
+ *
+ * This call is exclusively for use by phy drivers, which
+ * coordinate the activities of drivers for host and peripheral
+ * controllers, and in some cases for VBUS current regulation.
+ */
+int usb_add_phy(struct usb_phy *x, enum usb_phy_type type)
+{
+	int		ret = 0;
+	unsigned long	flags;
+	struct usb_phy	*phy;
+
+	if (x->type != USB_PHY_TYPE_UNDEFINED) {
+		dev_err(x->dev, "not accepting initialized PHY %s\n", x->label);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&phy_lock, flags);
+
+	list_for_each_entry(phy, &phy_list, head) {
+		if (phy->type == type) {
+			ret = -EBUSY;
+			dev_err(x->dev, "transceiver type %s already exists\n",
+						usb_phy_type_string(type));
+			goto out;
+		}
+	}
+
+	x->type = type;
+	list_add_tail(&x->head, &phy_list);
+
+out:
+	spin_unlock_irqrestore(&phy_lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL(usb_add_phy);
+
+/**
+ * usb_add_phy_dev - declare the USB PHY
+ * @x: the USB phy to be used; or NULL
+ *
+ * This call is exclusively for use by phy drivers, which
+ * coordinate the activities of drivers for host and peripheral
+ * controllers, and in some cases for VBUS current regulation.
+ */
+int usb_add_phy_dev(struct usb_phy *x)
+{
+	struct usb_phy_bind *phy_bind;
+	unsigned long flags;
+
+	if (!x->dev) {
+		dev_err(x->dev, "no device provided for PHY\n");
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&phy_lock, flags);
+	list_for_each_entry(phy_bind, &phy_bind_list, list)
+		if (!(strcmp(phy_bind->phy_dev_name, dev_name(x->dev))))
+			phy_bind->phy = x;
+
+	list_add_tail(&x->head, &phy_list);
+
+	spin_unlock_irqrestore(&phy_lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL(usb_add_phy_dev);
+
+/**
+ * usb_remove_phy - remove the OTG PHY
+ * @x: the USB OTG PHY to be removed;
+ *
+ * This reverts the effects of usb_add_phy
+ */
+void usb_remove_phy(struct usb_phy *x)
+{
+	unsigned long	flags;
+	struct usb_phy_bind *phy_bind;
+
+	spin_lock_irqsave(&phy_lock, flags);
+	if (x) {
+		list_for_each_entry(phy_bind, &phy_bind_list, list)
+			if (phy_bind->phy == x)
+				phy_bind->phy = NULL;
+		list_del(&x->head);
+	}
+	spin_unlock_irqrestore(&phy_lock, flags);
+}
+EXPORT_SYMBOL(usb_remove_phy);
+
+/**
+ * usb_bind_phy - bind the phy and the controller that uses the phy
+ * @dev_name: the device name of the device that will bind to the phy
+ * @index: index to specify the port number
+ * @phy_dev_name: the device name of the phy
+ *
+ * Fills the phy_bind structure with the dev_name and phy_dev_name. This will
+ * be used when the phy driver registers the phy and when the controller
+ * requests this phy.
+ *
+ * To be used by platform specific initialization code.
+ */
+int __init usb_bind_phy(const char *dev_name, u8 index,
+				const char *phy_dev_name)
+{
+	struct usb_phy_bind *phy_bind;
+	unsigned long flags;
+
+	phy_bind = kzalloc(sizeof(*phy_bind), GFP_KERNEL);
+	if (!phy_bind) {
+		pr_err("phy_bind(): No memory for phy_bind");
+		return -ENOMEM;
+	}
+
+	phy_bind->dev_name = dev_name;
+	phy_bind->phy_dev_name = phy_dev_name;
+	phy_bind->index = index;
+
+	spin_lock_irqsave(&phy_lock, flags);
+	list_add_tail(&phy_bind->list, &phy_bind_list);
+	spin_unlock_irqrestore(&phy_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_bind_phy);
-- 
1.7.10.4

[PATCH 2/6] usb: add devicetree helpers for determining dr_mode and phy_type

[Sascha Hauer]

From: Michael Grzeschik <m.grzeschik@pengutronix.de>

This adds two little devicetree helper functions for determining the
dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
the devicetree.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/usb/usb-common.c |   69 ++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/usb/of.h   |   27 ++++++++++++++++++
 include/linux/usb/otg.h  |    7 +++++
 include/linux/usb/phy.h  |    9 ++++++
 4 files changed, 112 insertions(+)
 create mode 100644 include/linux/usb/of.h

diff --git a/drivers/usb/usb-common.c b/drivers/usb/usb-common.c
index d29503e..1c0292c 100644
--- a/drivers/usb/usb-common.c
+++ b/drivers/usb/usb-common.c
@@ -14,6 +14,9 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/usb/ch9.h>
+#include <linux/of.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
 
 const char *usb_speed_string(enum usb_device_speed speed)
 {
@@ -32,4 +35,70 @@ const char *usb_speed_string(enum usb_device_speed speed)
 }
 EXPORT_SYMBOL_GPL(usb_speed_string);
 
+#ifdef CONFIG_OF
+static const char *usb_dr_modes[] = {
+	[USB_DR_MODE_UNKNOWN]		= "",
+	[USB_DR_MODE_HOST]		= "host",
+	[USB_DR_MODE_PERIPHERAL]	= "peripheral",
+	[USB_DR_MODE_OTG]		= "otg",
+};
+
+/**
+ * of_usb_get_dr_mode - Get dual role mode for given device_node
+ * @np:	Pointer to the given device_node
+ *
+ * The function gets phy interface string from property 'dr_mode',
+ * and returns the correspondig enum usb_phy_dr_mode
+ */
+enum usb_phy_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+	const char *dr_mode;
+	int err, i;
+
+	err = of_property_read_string(np, "dr_mode", &dr_mode);
+	if (err < 0)
+		return USB_DR_MODE_UNKNOWN;
+
+	for (i = 0; i < ARRAY_SIZE(usb_dr_modes); i++)
+		if (!strcasecmp(dr_mode, usb_dr_modes[i]))
+			return i;
+
+	return USB_DR_MODE_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(of_usb_get_dr_mode);
+
+static const char *usbphy_modes[] = {
+	[USBPHY_INTERFACE_MODE_NA]	= "",
+	[USBPHY_INTERFACE_MODE_UTMI]	= "utmi",
+	[USBPHY_INTERFACE_MODE_UTMIW]	= "utmi_wide",
+	[USBPHY_INTERFACE_MODE_ULPI]	= "ulpi",
+	[USBPHY_INTERFACE_MODE_SERIAL]	= "serial",
+	[USBPHY_INTERFACE_MODE_HSIC]	= "hsic",
+};
+
+/**
+ * of_get_usbphy_mode - Get phy mode for given device_node
+ * @np:	Pointer to the given device_node
+ *
+ * The function gets phy interface string from property 'phy_type',
+ * and returns the correspondig enum usb_phy_interface
+ */
+enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
+{
+	const char *phy_type;
+	int err, i;
+
+	err = of_property_read_string(np, "phy_type", &phy_type);
+	if (err < 0)
+		return USBPHY_INTERFACE_MODE_NA;
+
+	for (i = 0; i < ARRAY_SIZE(usbphy_modes); i++)
+		if (!strcasecmp(phy_type, usbphy_modes[i]))
+			return i;
+
+	return USBPHY_INTERFACE_MODE_NA;
+}
+EXPORT_SYMBOL_GPL(of_usb_get_phy_mode);
+#endif
+
 MODULE_LICENSE("GPL");
diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h
new file mode 100644
index 0000000..53d69da
--- /dev/null
+++ b/include/linux/usb/of.h
@@ -0,0 +1,27 @@
+/*
+ * OF helpers for usb devices.
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_USB_OF_H
+#define __LINUX_USB_OF_H
+
+#include <linux/usb/phy.h>
+
+#ifdef CONFIG_OF
+enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np);
+enum usb_phy_dr_mode of_usb_get_dr_mode(struct device_node *np);
+#else
+static inline enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
+{
+	return USBPHY_INTERFACE_MODE_NA;
+}
+
+static inline enum usb_phy_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+	return USB_DR_MODE_UNKNOWN;
+}
+#endif
+
+#endif /* __LINUX_USB_OF_H */
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index e8a5fe8..9c012f0 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -99,4 +99,11 @@ otg_start_srp(struct usb_otg *otg)
 /* for OTG controller drivers (and maybe other stuff) */
 extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
 
+enum usb_phy_dr_mode {
+	USB_DR_MODE_UNKNOWN,
+	USB_DR_MODE_HOST,
+	USB_DR_MODE_PERIPHERAL,
+	USB_DR_MODE_OTG,
+};
+
 #endif /* __LINUX_USB_OTG_H */
diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h
index 15847cb..a5170d8 100644
--- a/include/linux/usb/phy.h
+++ b/include/linux/usb/phy.h
@@ -12,6 +12,15 @@
 #include <linux/notifier.h>
 #include <linux/usb.h>
 
+enum usb_phy_interface {
+	USBPHY_INTERFACE_MODE_NA,
+	USBPHY_INTERFACE_MODE_UTMI,
+	USBPHY_INTERFACE_MODE_UTMIW,
+	USBPHY_INTERFACE_MODE_ULPI,
+	USBPHY_INTERFACE_MODE_SERIAL,
+	USBPHY_INTERFACE_MODE_HSIC,
+};
+
 enum usb_phy_events {
 	USB_EVENT_NONE,         /* no events or cable disconnected */
 	USB_EVENT_VBUS,         /* vbus valid event */
-- 
1.7.10.4

[PATCH 3/6] usb: chipidea: ci13xxx-imx: create dynamic platformdata

[Sascha Hauer]

From: Michael Grzeschik <m.grzeschik@pengutronix.de>

This patch removes the limitation of having only one instance of the
ci13xxx-imx platformdata and makes different configurations possible.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/usb/chipidea/ci13xxx_imx.c |   25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
index 8c29122..69024e0 100644
--- a/drivers/usb/chipidea/ci13xxx_imx.c
+++ b/drivers/usb/chipidea/ci13xxx_imx.c
@@ -85,17 +85,10 @@ EXPORT_SYMBOL_GPL(usbmisc_get_init_data);
 
 /* End of common functions shared by usbmisc drivers*/
 
-static struct ci13xxx_platform_data ci13xxx_imx_platdata  = {
-	.name			= "ci13xxx_imx",
-	.flags			= CI13XXX_REQUIRE_TRANSCEIVER |
-				  CI13XXX_PULLUP_ON_VBUS |
-				  CI13XXX_DISABLE_STREAMING,
-	.capoffset		= DEF_CAPOFFSET,
-};
-
 static int ci13xxx_imx_probe(struct platform_device *pdev)
 {
 	struct ci13xxx_imx_data *data;
+	struct ci13xxx_platform_data *pdata;
 	struct platform_device *plat_ci, *phy_pdev;
 	struct device_node *phy_np;
 	struct resource *res;
@@ -107,6 +100,18 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 		&& !usbmisc_ops)
 		return -EPROBE_DEFER;
 
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX pdata!\n");
+		return -ENOMEM;
+	}
+
+	pdata->name = "ci13xxx_imx";
+	pdata->capoffset = DEF_CAPOFFSET;
+	pdata->flags = CI13XXX_REQUIRE_TRANSCEIVER |
+		       CI13XXX_PULLUP_ON_VBUS |
+		       CI13XXX_DISABLE_STREAMING;
+
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (!data) {
 		dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX data!\n");
@@ -168,7 +173,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 		reg_vbus = NULL;
 	}
 
-	ci13xxx_imx_platdata.phy = data->phy;
+	pdata->phy = data->phy;
 
 	if (!pdev->dev.dma_mask) {
 		pdev->dev.dma_mask = devm_kzalloc(&pdev->dev,
@@ -193,7 +198,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 
 	plat_ci = ci13xxx_add_device(&pdev->dev,
 				pdev->resource, pdev->num_resources,
-				&ci13xxx_imx_platdata);
+				pdata);
 	if (IS_ERR(plat_ci)) {
 		ret = PTR_ERR(plat_ci);
 		dev_err(&pdev->dev,
-- 
1.7.10.4

[PATCH 4/6] usb: chipidea: add PTW and PTS handling

[Sascha Hauer]

From: Michael Grzeschik <m.grzeschik@pengutronix.de>

This patch makes it possible to configure the PTW and PTS bits inside
the portsc register for host and device mode before the driver starts
and the phy can be addressed as hardware implementation is designed.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../devicetree/bindings/usb/ci13xxx-imx.txt        |    5 +++
 drivers/usb/chipidea/bits.h                        |    7 ++++
 drivers/usb/chipidea/ci13xxx_imx.c                 |    3 ++
 drivers/usb/chipidea/core.c                        |   40 ++++++++++++++++++++
 include/linux/usb/chipidea.h                       |    1 +
 5 files changed, 56 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
index 5778b9c..dd42ccd 100644
--- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
+++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
@@ -5,6 +5,11 @@ Required properties:
 - reg: Should contain registers location and length
 - interrupts: Should contain controller interrupt
 
+Recommended properies:
+- phy_type: the type of the phy connected to the core. Should be one
+  of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
+  property the PORTSC register won't be touched
+
 Optional properties:
 - fsl,usbphy: phandler of usb phy that connects to the only one port
 - fsl,usbmisc: phandler of non-core register device, with one argument
diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h
index 050de85..4817fd8 100644
--- a/drivers/usb/chipidea/bits.h
+++ b/drivers/usb/chipidea/bits.h
@@ -48,6 +48,13 @@
 #define PORTSC_SUSP           BIT(7)
 #define PORTSC_HSP            BIT(9)
 #define PORTSC_PTC            (0x0FUL << 16)
+/* PTS and PTW for non lpm version only */
+#define PORTSC_PTS_PTW        (BIT(31) | BIT(30) | BIT(28) | BIT(25))
+#define PORTSC_PTS_PTW_UTMI   0
+#define PORTSC_PTS_PTW_HSIC   BIT(25)
+#define PORTSC_PTS_PTW_UTMIW  BIT(28)
+#define PORTSC_PTS_PTW_ULPI   BIT(31)
+#define PORTSC_PTS_PTW_SERIAL (BIT(30) | BIT(31))
 
 /* DEVLC */
 #define DEVLC_PSPD            (0x03UL << 25)
diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
index 69024e0..ebc1148 100644
--- a/drivers/usb/chipidea/ci13xxx_imx.c
+++ b/drivers/usb/chipidea/ci13xxx_imx.c
@@ -21,6 +21,7 @@
 #include <linux/clk.h>
 #include <linux/regulator/consumer.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/usb/of.h>
 
 #include "ci.h"
 #include "ci13xxx_imx.h"
@@ -112,6 +113,8 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 		       CI13XXX_PULLUP_ON_VBUS |
 		       CI13XXX_DISABLE_STREAMING;
 
+	pdata->phy_mode = of_usb_get_phy_mode(pdev->dev.of_node);
+
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (!data) {
 		dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX data!\n");
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 57cae1f..dcb650f 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -67,6 +67,8 @@
 #include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/chipidea.h>
+#include <linux/usb/of.h>
+#include <linux/phy.h>
 
 #include "ci.h"
 #include "udc.h"
@@ -211,6 +213,42 @@ static int hw_device_init(struct ci13xxx *ci, void __iomem *base)
 	return 0;
 }
 
+static void hw_phymode_configure(struct ci13xxx *ci)
+{
+	u32 portsc;
+
+	/*
+	 * The lpm version has the corresponding bits in the devlc register.
+	 * Currently not implemented.
+	 */
+	if (ci->hw_bank.lpm)
+		return;
+
+	switch (ci->platdata->phy_mode) {
+	case USBPHY_INTERFACE_MODE_UTMI:
+		portsc = PORTSC_PTS_PTW_UTMI;
+		break;
+	case USBPHY_INTERFACE_MODE_UTMIW:
+		portsc = PORTSC_PTS_PTW_UTMIW;
+		break;
+	case USBPHY_INTERFACE_MODE_ULPI:
+		portsc = PORTSC_PTS_PTW_ULPI;
+		break;
+	case USBPHY_INTERFACE_MODE_SERIAL:
+		portsc = PORTSC_PTS_PTW_SERIAL;
+		break;
+	case USBPHY_INTERFACE_MODE_HSIC:
+		portsc = PORTSC_PTS_PTW_HSIC;
+		break;
+	default:
+		return;
+	}
+
+	hw_write(ci, OP_PORTSC, PORTSC_PTS_PTW, portsc);
+
+	mdelay(10);
+}
+
 /**
  * hw_device_reset: resets chip (execute without interruption)
  * @ci: the controller
@@ -476,6 +514,8 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 			: CI_ROLE_GADGET;
 	}
 
+	hw_phymode_configure(ci);
+
 	ret = ci_role_start(ci, ci->role);
 	if (ret) {
 		dev_err(dev, "can't start %s role\n", ci_role(ci)->name);
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index 544825d..1a2aa18 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -14,6 +14,7 @@ struct ci13xxx_platform_data {
 	uintptr_t	 capoffset;
 	unsigned	 power_budget;
 	struct usb_phy	*phy;
+	enum usb_phy_interface phy_mode;
 	unsigned long	 flags;
 #define CI13XXX_REGS_SHARED		BIT(0)
 #define CI13XXX_REQUIRE_TRANSCEIVER	BIT(1)
-- 
1.7.10.4

[PATCH 5/6] USB chipidea: introduce dual role mode pdata flags

[Sascha Hauer]

Even if a chipidea core is otg capable the board may not. This allows
to explicitly set the core to host/peripheral mode. Without these
flags the driver falls back to the old behaviour.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/usb/chipidea/core.c  |   21 +++++++++++++++------
 include/linux/usb/chipidea.h |    2 +-
 2 files changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index dcb650f..f313927 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -436,6 +436,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 	struct resource	*res;
 	void __iomem	*base;
 	int		ret;
+	int		dr_mode;
 
 	if (!dev->platform_data) {
 		dev_err(dev, "platform data missing\n");
@@ -488,14 +489,22 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	dr_mode = ci->platdata->dr_mode;
+	if (dr_mode == USB_DR_MODE_UNKNOWN)
+		dr_mode = USB_DR_MODE_OTG;
+
 	/* initialize role(s) before the interrupt is requested */
-	ret = ci_hdrc_host_init(ci);
-	if (ret)
-		dev_info(dev, "doesn't support host\n");
+	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
+		ret = ci_hdrc_host_init(ci);
+		if (ret)
+			dev_info(dev, "doesn't support host\n");
+	}
 
-	ret = ci_hdrc_gadget_init(ci);
-	if (ret)
-		dev_info(dev, "doesn't support gadget\n");
+	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
+		ret = ci_hdrc_gadget_init(ci);
+		if (ret)
+			dev_info(dev, "doesn't support gadget\n");
+	}
 
 	if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
 		dev_err(dev, "no supported roles\n");
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index 1a2aa18..d2d4101 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -20,7 +20,7 @@ struct ci13xxx_platform_data {
 #define CI13XXX_REQUIRE_TRANSCEIVER	BIT(1)
 #define CI13XXX_PULLUP_ON_VBUS		BIT(2)
 #define CI13XXX_DISABLE_STREAMING	BIT(3)
-
+	enum usb_phy_dr_mode	dr_mode;
 #define CI13XXX_CONTROLLER_RESET_EVENT		0
 #define CI13XXX_CONTROLLER_STOPPED_EVENT	1
 	void	(*notify_event) (struct ci13xxx *ci, unsigned event);
-- 
1.7.10.4

[PATCH 6/6] USB chipidea i.MX: introduce dr_mode property

[Sascha Hauer]

The dr_mode devicetree property allows to explicitly specify the
host/peripheral/otg mode. This is necessary for boards without proper
ID pin handling.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 Documentation/devicetree/bindings/usb/ci13xxx-imx.txt |    1 +
 drivers/usb/chipidea/ci13xxx_imx.c                    |    1 +
 2 files changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
index dd42ccd..493a414 100644
--- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
+++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
@@ -9,6 +9,7 @@ Recommended properies:
 - phy_type: the type of the phy connected to the core. Should be one
   of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
   property the PORTSC register won't be touched
+- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
 
 Optional properties:
 - fsl,usbphy: phandler of usb phy that connects to the only one port
diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
index ebc1148..b598bb8f 100644
--- a/drivers/usb/chipidea/ci13xxx_imx.c
+++ b/drivers/usb/chipidea/ci13xxx_imx.c
@@ -114,6 +114,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 		       CI13XXX_DISABLE_STREAMING;
 
 	pdata->phy_mode = of_usb_get_phy_mode(pdev->dev.of_node);
+	pdata->dr_mode = of_usb_get_dr_mode(pdev->dev.of_node);
 
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (!data) {
-- 
1.7.10.4

[PATCH 4/6] usb: chipidea: add PTW and PTS handling

[Matthieu CASTET]

> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> index 57cae1f..dcb650f 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -67,6 +67,8 @@
>  #include <linux/usb/gadget.h>
>  #include <linux/usb/otg.h>
>  #include <linux/usb/chipidea.h>
> +#include <linux/usb/of.h>
> +#include <linux/phy.h>
>  
>  #include "ci.h"
>  #include "udc.h"
> @@ -211,6 +213,42 @@ static int hw_device_init(struct ci13xxx *ci, void __iomem *base)
>  	return 0;
>  }
>  
> +static void hw_phymode_configure(struct ci13xxx *ci)
> +{
> +	u32 portsc;
> +
> +	/*
> +	 * The lpm version has the corresponding bits in the devlc register.
> +	 * Currently not implemented.
> +	 */
> +	if (ci->hw_bank.lpm)
> +		return;
Why you don't implement it ?

If you don't implement it, I believe you should add a warning in order to catch
it when used with lpm devices.


Matthieu

[PATCH 4/6] usb: chipidea: add PTW and PTS handling

[Sascha Hauer]

On Wed, Jan 30, 2013 at 05:54:54PM +0100, Matthieu CASTET wrote:
> > diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> > index 57cae1f..dcb650f 100644
> > --- a/drivers/usb/chipidea/core.c
> > +++ b/drivers/usb/chipidea/core.c
> > @@ -67,6 +67,8 @@
> >  #include <linux/usb/gadget.h>
> >  #include <linux/usb/otg.h>
> >  #include <linux/usb/chipidea.h>
> > +#include <linux/usb/of.h>
> > +#include <linux/phy.h>
> >  
> >  #include "ci.h"
> >  #include "udc.h"
> > @@ -211,6 +213,42 @@ static int hw_device_init(struct ci13xxx *ci, void __iomem *base)
> >  	return 0;
> >  }
> >  
> > +static void hw_phymode_configure(struct ci13xxx *ci)
> > +{
> > +	u32 portsc;
> > +
> > +	/*
> > +	 * The lpm version has the corresponding bits in the devlc register.
> > +	 * Currently not implemented.
> > +	 */
> > +	if (ci->hw_bank.lpm)
> > +		return;
> Why you don't implement it ?
> 
> If you don't implement it, I believe you should add a warning in order to catch
> it when used with lpm devices.

I'm against adding a warning because current users seem to go well
without this setting. Adding a warning would lead to more confusion than
it would help.

I could try and implement it, though I'm unsure about the register
layout.

What I know from an earlier post from you is this:

#define LPM_PTS(d)  (((d)>>29)&7)
#define LPM_STS     BIT(28) /* serial transceiver select */
#define LPM_PTW     BIT(27) /* parallel transceiver width */

Do you also know how LPM_PTS is decoded?

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[PATCH 1/6] USB: move bulk of otg/otg.c to phy/phy.c

[Peter Chen]

On Wed, Jan 30, 2013 at 04:29:37PM +0100, Sascha Hauer wrote:
> Most of otg/otg.c is not otg specific, but phy specific, so move it
> to the phy directory.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---

Good catch, you can add Felipe Balbi <balbi@ti.com> to list, he is
the maintainer of USB PHY.

Best Regards,
Peter Chen

[PATCH 2/6] usb: add devicetree helpers for determining dr_mode and phy_type

[Peter Chen]

On Wed, Jan 30, 2013 at 04:29:38PM +0100, Sascha Hauer wrote:
> From: Michael Grzeschik <m.grzeschik@pengutronix.de>
> 
> This adds two little devicetree helper functions for determining the
> dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
> the devicetree.
> 
> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  drivers/usb/usb-common.c |   69 ++++++++++++++++++++++++++++++++++++++++++++++
>  include/linux/usb/of.h   |   27 ++++++++++++++++++
>  include/linux/usb/otg.h  |    7 +++++
>  include/linux/usb/phy.h  |    9 ++++++
>  4 files changed, 112 insertions(+)
>  create mode 100644 include/linux/usb/of.h
> 
> diff --git a/drivers/usb/usb-common.c b/drivers/usb/usb-common.c
> index d29503e..1c0292c 100644
> --- a/drivers/usb/usb-common.c
> +++ b/drivers/usb/usb-common.c
> @@ -14,6 +14,9 @@
>  #include <linux/kernel.h>
>  #include <linux/module.h>
>  #include <linux/usb/ch9.h>
> +#include <linux/of.h>
> +#include <linux/usb/of.h>
> +#include <linux/usb/otg.h>
>  
>  const char *usb_speed_string(enum usb_device_speed speed)
>  {
> @@ -32,4 +35,70 @@ const char *usb_speed_string(enum usb_device_speed speed)
>  }
>  EXPORT_SYMBOL_GPL(usb_speed_string);
>  
> +#ifdef CONFIG_OF
> +static const char *usb_dr_modes[] = {
> +	[USB_DR_MODE_UNKNOWN]		= "",
> +	[USB_DR_MODE_HOST]		= "host",
> +	[USB_DR_MODE_PERIPHERAL]	= "peripheral",
> +	[USB_DR_MODE_OTG]		= "otg",
> +};
> +
> +/**
> + * of_usb_get_dr_mode - Get dual role mode for given device_node
> + * @np:	Pointer to the given device_node
> + *
> + * The function gets phy interface string from property 'dr_mode',
> + * and returns the correspondig enum usb_phy_dr_mode
> + */
> +enum usb_phy_dr_mode of_usb_get_dr_mode(struct device_node *np)
The word "phy" at usb_phy_dr_mode may cause misunderstand, just usb_dr_mode
is ok
> +{
> +	const char *dr_mode;
> +	int err, i;
> +
> +	err = of_property_read_string(np, "dr_mode", &dr_mode);
> +	if (err < 0)
> +		return USB_DR_MODE_UNKNOWN;
> +
> +	for (i = 0; i < ARRAY_SIZE(usb_dr_modes); i++)
> +		if (!strcasecmp(dr_mode, usb_dr_modes[i]))
> +			return i;
Just curious, why not using strcmp?
> +
> +	return USB_DR_MODE_UNKNOWN;
> +}
> +
> +#ifdef CONFIG_OF
> +enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np);
> +enum usb_phy_dr_mode of_usb_get_dr_mode(struct device_node *np);
> +#else
> +static inline enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
> +{
> +	return USBPHY_INTERFACE_MODE_NA;
> +}
> +
> +static inline enum usb_phy_dr_mode of_usb_get_dr_mode(struct device_node *np)
> +{
> +	return USB_DR_MODE_UNKNOWN;
> +}
For, dr_mode, if value has not existed, you use *_UNKNOWN, why
for usbphy,  you use *_NA. It is better uniform.

-- 

Best Regards,
Peter Chen

[PATCH 4/6] usb: chipidea: add PTW and PTS handling

[Peter Chen]

On Wed, Jan 30, 2013 at 04:29:40PM +0100, Sascha Hauer wrote:
> From: Michael Grzeschik <m.grzeschik@pengutronix.de>
> 
> +static void hw_phymode_configure(struct ci13xxx *ci)
> +{
> +	u32 portsc;
> +
> +	/*
> +	 * The lpm version has the corresponding bits in the devlc register.
> +	 * Currently not implemented.
> +	 */
> +	if (ci->hw_bank.lpm)
> +		return;
> +
> +	switch (ci->platdata->phy_mode) {
> +	case USBPHY_INTERFACE_MODE_UTMI:
> +		portsc = PORTSC_PTS_PTW_UTMI;
> +		break;
> +	case USBPHY_INTERFACE_MODE_UTMIW:
> +		portsc = PORTSC_PTS_PTW_UTMIW;
> +		break;
> +	case USBPHY_INTERFACE_MODE_ULPI:
> +		portsc = PORTSC_PTS_PTW_ULPI;
> +		break;
> +	case USBPHY_INTERFACE_MODE_SERIAL:
> +		portsc = PORTSC_PTS_PTW_SERIAL;
> +		break;
> +	case USBPHY_INTERFACE_MODE_HSIC:
> +		portsc = PORTSC_PTS_PTW_HSIC;
> +		break;
> +	default:
> +		return;
> +	}
> +
> +	hw_write(ci, OP_PORTSC, PORTSC_PTS_PTW, portsc);
> +
> +	mdelay(10);
Please use usleep_range, can we recall which platform needs it?
As we as I know, there is no such delay at FSL internal release
code.
-- 

Best Regards,
Peter Chen

[PATCH 2/6] usb: add devicetree helpers for determining dr_mode and phy_type

[kishon]

Hi,

On Wednesday 30 January 2013 08:59 PM, Sascha Hauer wrote:
> From: Michael Grzeschik <m.grzeschik@pengutronix.de>
>
> This adds two little devicetree helper functions for determining the
> dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
> the devicetree.
>
> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>   drivers/usb/usb-common.c |   69 ++++++++++++++++++++++++++++++++++++++++++++++
>   include/linux/usb/of.h   |   27 ++++++++++++++++++
>   include/linux/usb/otg.h  |    7 +++++
>   include/linux/usb/phy.h  |    9 ++++++
>   4 files changed, 112 insertions(+)
>   create mode 100644 include/linux/usb/of.h
>
> diff --git a/drivers/usb/usb-common.c b/drivers/usb/usb-common.c
> index d29503e..1c0292c 100644
> --- a/drivers/usb/usb-common.c
> +++ b/drivers/usb/usb-common.c
> @@ -14,6 +14,9 @@
>   #include <linux/kernel.h>
>   #include <linux/module.h>
>   #include <linux/usb/ch9.h>
> +#include <linux/of.h>
> +#include <linux/usb/of.h>
> +#include <linux/usb/otg.h>
>
>   const char *usb_speed_string(enum usb_device_speed speed)
>   {
> @@ -32,4 +35,70 @@ const char *usb_speed_string(enum usb_device_speed speed)
>   }
>   EXPORT_SYMBOL_GPL(usb_speed_string);
>
> +#ifdef CONFIG_OF
> +static const char *usb_dr_modes[] = {
> +	[USB_DR_MODE_UNKNOWN]		= "",
> +	[USB_DR_MODE_HOST]		= "host",
> +	[USB_DR_MODE_PERIPHERAL]	= "peripheral",
> +	[USB_DR_MODE_OTG]		= "otg",
> +};
> +
> +/**
> + * of_usb_get_dr_mode - Get dual role mode for given device_node
> + * @np:	Pointer to the given device_node
> + *
> + * The function gets phy interface string from property 'dr_mode',
> + * and returns the correspondig enum usb_phy_dr_mode
> + */
> +enum usb_phy_dr_mode of_usb_get_dr_mode(struct device_node *np)
> +{
> +	const char *dr_mode;
> +	int err, i;
> +
> +	err = of_property_read_string(np, "dr_mode", &dr_mode);
> +	if (err < 0)
> +		return USB_DR_MODE_UNKNOWN;
> +
> +	for (i = 0; i < ARRAY_SIZE(usb_dr_modes); i++)
> +		if (!strcasecmp(dr_mode, usb_dr_modes[i]))
> +			return i;
> +
> +	return USB_DR_MODE_UNKNOWN;
> +}
> +EXPORT_SYMBOL_GPL(of_usb_get_dr_mode);
> +
> +static const char *usbphy_modes[] = {
> +	[USBPHY_INTERFACE_MODE_NA]	= "",
> +	[USBPHY_INTERFACE_MODE_UTMI]	= "utmi",
> +	[USBPHY_INTERFACE_MODE_UTMIW]	= "utmi_wide",
> +	[USBPHY_INTERFACE_MODE_ULPI]	= "ulpi",
> +	[USBPHY_INTERFACE_MODE_SERIAL]	= "serial",
> +	[USBPHY_INTERFACE_MODE_HSIC]	= "hsic",
> +};
> +
> +/**
> + * of_get_usbphy_mode - Get phy mode for given device_node

%s/of_get_usbphy_mode/of_usb_get_phy_mode
> + * @np:	Pointer to the given device_node
> + *
> + * The function gets phy interface string from property 'phy_type',
> + * and returns the correspondig enum usb_phy_interface
> + */
> +enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
> +{

You agreed to move this function inside usb/phy.. no?

Thanks
Kishon

[PATCH 2/6] usb: add devicetree helpers for determining dr_mode and phy_type

[Sascha Hauer]

On Thu, Jan 31, 2013 at 11:44:21AM +0530, kishon wrote:
> Hi,
> 
> On Wednesday 30 January 2013 08:59 PM, Sascha Hauer wrote:
> >From: Michael Grzeschik <m.grzeschik@pengutronix.de>
> >
> >This adds two little devicetree helper functions for determining the
> >dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
> >the devicetree.
> >
> >Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> >Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
> >Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> >---
> >  drivers/usb/usb-common.c |   69 ++++++++++++++++++++++++++++++++++++++++++++++
> >  include/linux/usb/of.h   |   27 ++++++++++++++++++
> >  include/linux/usb/otg.h  |    7 +++++
> >  include/linux/usb/phy.h  |    9 ++++++
> >  4 files changed, 112 insertions(+)
> >  create mode 100644 include/linux/usb/of.h
> >
> >diff --git a/drivers/usb/usb-common.c b/drivers/usb/usb-common.c
> >index d29503e..1c0292c 100644
> >--- a/drivers/usb/usb-common.c
> >+++ b/drivers/usb/usb-common.c
> >@@ -14,6 +14,9 @@
> >  #include <linux/kernel.h>
> >  #include <linux/module.h>
> >  #include <linux/usb/ch9.h>
> >+#include <linux/of.h>
> >+#include <linux/usb/of.h>
> >+#include <linux/usb/otg.h>
> >
> >  const char *usb_speed_string(enum usb_device_speed speed)
> >  {
> >@@ -32,4 +35,70 @@ const char *usb_speed_string(enum usb_device_speed speed)
> >  }
> >  EXPORT_SYMBOL_GPL(usb_speed_string);
> >
> >+#ifdef CONFIG_OF
> >+static const char *usb_dr_modes[] = {
> >+	[USB_DR_MODE_UNKNOWN]		= "",
> >+	[USB_DR_MODE_HOST]		= "host",
> >+	[USB_DR_MODE_PERIPHERAL]	= "peripheral",
> >+	[USB_DR_MODE_OTG]		= "otg",
> >+};
> >+
> >+/**
> >+ * of_usb_get_dr_mode - Get dual role mode for given device_node
> >+ * @np:	Pointer to the given device_node
> >+ *
> >+ * The function gets phy interface string from property 'dr_mode',
> >+ * and returns the correspondig enum usb_phy_dr_mode
> >+ */
> >+enum usb_phy_dr_mode of_usb_get_dr_mode(struct device_node *np)
> >+{
> >+	const char *dr_mode;
> >+	int err, i;
> >+
> >+	err = of_property_read_string(np, "dr_mode", &dr_mode);
> >+	if (err < 0)
> >+		return USB_DR_MODE_UNKNOWN;
> >+
> >+	for (i = 0; i < ARRAY_SIZE(usb_dr_modes); i++)
> >+		if (!strcasecmp(dr_mode, usb_dr_modes[i]))
> >+			return i;
> >+
> >+	return USB_DR_MODE_UNKNOWN;
> >+}
> >+EXPORT_SYMBOL_GPL(of_usb_get_dr_mode);
> >+
> >+static const char *usbphy_modes[] = {
> >+	[USBPHY_INTERFACE_MODE_NA]	= "",
> >+	[USBPHY_INTERFACE_MODE_UTMI]	= "utmi",
> >+	[USBPHY_INTERFACE_MODE_UTMIW]	= "utmi_wide",
> >+	[USBPHY_INTERFACE_MODE_ULPI]	= "ulpi",
> >+	[USBPHY_INTERFACE_MODE_SERIAL]	= "serial",
> >+	[USBPHY_INTERFACE_MODE_HSIC]	= "hsic",
> >+};
> >+
> >+/**
> >+ * of_get_usbphy_mode - Get phy mode for given device_node
> 
> %s/of_get_usbphy_mode/of_usb_get_phy_mode
> >+ * @np:	Pointer to the given device_node
> >+ *
> >+ * The function gets phy interface string from property 'phy_type',
> >+ * and returns the correspondig enum usb_phy_interface
> >+ */
> >+enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
> >+{
> 
> You agreed to move this function inside usb/phy.. no?

Yes, I did, but as mentioned in the introduction mail, the chipidea
driver has to determine the phy type even when phy support (aka
CONFIG_USB_OTG_UTILS) is disabled, so I can't put it in phy/phy.c.

I could add a phy/of.c though. Would that be better?

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[PATCH 4/6] usb: chipidea: add PTW and PTS handling

[Sascha Hauer]

On Thu, Jan 31, 2013 at 11:08:54AM +0800, Peter Chen wrote:
> On Wed, Jan 30, 2013 at 04:29:40PM +0100, Sascha Hauer wrote:
> > From: Michael Grzeschik <m.grzeschik@pengutronix.de>
> > 
> > +static void hw_phymode_configure(struct ci13xxx *ci)
> > +{
> > +	u32 portsc;
> > +
> > +	/*
> > +	 * The lpm version has the corresponding bits in the devlc register.
> > +	 * Currently not implemented.
> > +	 */
> > +	if (ci->hw_bank.lpm)
> > +		return;
> > +
> > +	switch (ci->platdata->phy_mode) {
> > +	case USBPHY_INTERFACE_MODE_UTMI:
> > +		portsc = PORTSC_PTS_PTW_UTMI;
> > +		break;
> > +	case USBPHY_INTERFACE_MODE_UTMIW:
> > +		portsc = PORTSC_PTS_PTW_UTMIW;
> > +		break;
> > +	case USBPHY_INTERFACE_MODE_ULPI:
> > +		portsc = PORTSC_PTS_PTW_ULPI;
> > +		break;
> > +	case USBPHY_INTERFACE_MODE_SERIAL:
> > +		portsc = PORTSC_PTS_PTW_SERIAL;
> > +		break;
> > +	case USBPHY_INTERFACE_MODE_HSIC:
> > +		portsc = PORTSC_PTS_PTW_HSIC;
> > +		break;
> > +	default:
> > +		return;
> > +	}
> > +
> > +	hw_write(ci, OP_PORTSC, PORTSC_PTS_PTW, portsc);
> > +
> > +	mdelay(10);
> Please use usleep_range, can we recall which platform needs it?
> As we as I know, there is no such delay at FSL internal release
> code.

Then let's drop it. People will complain when they find the platform
that needs it and then we can decide whether we add this unconditionally
or do something better.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[PATCH 2/6] usb: add devicetree helpers for determining dr_mode and phy_type

[Sascha Hauer]

On Thu, Jan 31, 2013 at 10:30:36AM +0800, Peter Chen wrote:
> On Wed, Jan 30, 2013 at 04:29:38PM +0100, Sascha Hauer wrote:
> > From: Michael Grzeschik <m.grzeschik@pengutronix.de>
> > 
> > This adds two little devicetree helper functions for determining the
> > dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
> > the devicetree.
> > 
> > Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> > Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > ---
> >  drivers/usb/usb-common.c |   69 ++++++++++++++++++++++++++++++++++++++++++++++
> >  include/linux/usb/of.h   |   27 ++++++++++++++++++
> >  include/linux/usb/otg.h  |    7 +++++
> >  include/linux/usb/phy.h  |    9 ++++++
> >  4 files changed, 112 insertions(+)
> >  create mode 100644 include/linux/usb/of.h
> > 
> > diff --git a/drivers/usb/usb-common.c b/drivers/usb/usb-common.c
> > index d29503e..1c0292c 100644
> > --- a/drivers/usb/usb-common.c
> > +++ b/drivers/usb/usb-common.c
> > @@ -14,6 +14,9 @@
> >  #include <linux/kernel.h>
> >  #include <linux/module.h>
> >  #include <linux/usb/ch9.h>
> > +#include <linux/of.h>
> > +#include <linux/usb/of.h>
> > +#include <linux/usb/otg.h>
> >  
> >  const char *usb_speed_string(enum usb_device_speed speed)
> >  {
> > @@ -32,4 +35,70 @@ const char *usb_speed_string(enum usb_device_speed speed)
> >  }
> >  EXPORT_SYMBOL_GPL(usb_speed_string);
> >  
> > +#ifdef CONFIG_OF
> > +static const char *usb_dr_modes[] = {
> > +	[USB_DR_MODE_UNKNOWN]		= "",
> > +	[USB_DR_MODE_HOST]		= "host",
> > +	[USB_DR_MODE_PERIPHERAL]	= "peripheral",
> > +	[USB_DR_MODE_OTG]		= "otg",
> > +};
> > +
> > +/**
> > + * of_usb_get_dr_mode - Get dual role mode for given device_node
> > + * @np:	Pointer to the given device_node
> > + *
> > + * The function gets phy interface string from property 'dr_mode',
> > + * and returns the correspondig enum usb_phy_dr_mode
> > + */
> > +enum usb_phy_dr_mode of_usb_get_dr_mode(struct device_node *np)
> The word "phy" at usb_phy_dr_mode may cause misunderstand, just usb_dr_mode
> is ok

ok, changed.

> > +{
> > +	const char *dr_mode;
> > +	int err, i;
> > +
> > +	err = of_property_read_string(np, "dr_mode", &dr_mode);
> > +	if (err < 0)
> > +		return USB_DR_MODE_UNKNOWN;
> > +
> > +	for (i = 0; i < ARRAY_SIZE(usb_dr_modes); i++)
> > +		if (!strcasecmp(dr_mode, usb_dr_modes[i]))
> > +			return i;
> Just curious, why not using strcmp?

Probably because this is based on drivers/of/of_net.c which uses
strcasecmp. I never heard that devicetrees are case insensitive, so
I'll change this to strcmp.

> > +
> > +	return USB_DR_MODE_UNKNOWN;
> > +}
> > +
> > +#ifdef CONFIG_OF
> > +enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np);
> > +enum usb_phy_dr_mode of_usb_get_dr_mode(struct device_node *np);
> > +#else
> > +static inline enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
> > +{
> > +	return USBPHY_INTERFACE_MODE_NA;
> > +}
> > +
> > +static inline enum usb_phy_dr_mode of_usb_get_dr_mode(struct device_node *np)
> > +{
> > +	return USB_DR_MODE_UNKNOWN;
> > +}
> For, dr_mode, if value has not existed, you use *_UNKNOWN, why
> for usbphy,  you use *_NA. It is better uniform.

yup, fixed.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[PATCH 2/6] usb: add devicetree helpers for determining dr_mode and phy_type

[kishon]

On Thursday 31 January 2013 01:13 PM, Sascha Hauer wrote:
> On Thu, Jan 31, 2013 at 11:44:21AM +0530, kishon wrote:
>> Hi,
>>
>> On Wednesday 30 January 2013 08:59 PM, Sascha Hauer wrote:
>>> From: Michael Grzeschik <m.grzeschik@pengutronix.de>
>>>
>>> This adds two little devicetree helper functions for determining the
>>> dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
>>> the devicetree.
>>>
>>> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
>>> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
>>> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
>>> ---
>>>   drivers/usb/usb-common.c |   69 ++++++++++++++++++++++++++++++++++++++++++++++
>>>   include/linux/usb/of.h   |   27 ++++++++++++++++++
>>>   include/linux/usb/otg.h  |    7 +++++
>>>   include/linux/usb/phy.h  |    9 ++++++
>>>   4 files changed, 112 insertions(+)
>>>   create mode 100644 include/linux/usb/of.h
>>>
>>> diff --git a/drivers/usb/usb-common.c b/drivers/usb/usb-common.c
>>> index d29503e..1c0292c 100644
>>> --- a/drivers/usb/usb-common.c
>>> +++ b/drivers/usb/usb-common.c
>>> @@ -14,6 +14,9 @@
>>>   #include <linux/kernel.h>
>>>   #include <linux/module.h>
>>>   #include <linux/usb/ch9.h>
>>> +#include <linux/of.h>
>>> +#include <linux/usb/of.h>
>>> +#include <linux/usb/otg.h>
>>>
>>>   const char *usb_speed_string(enum usb_device_speed speed)
>>>   {
>>> @@ -32,4 +35,70 @@ const char *usb_speed_string(enum usb_device_speed speed)
>>>   }
>>>   EXPORT_SYMBOL_GPL(usb_speed_string);
>>>
>>> +#ifdef CONFIG_OF
>>> +static const char *usb_dr_modes[] = {
>>> +	[USB_DR_MODE_UNKNOWN]		= "",
>>> +	[USB_DR_MODE_HOST]		= "host",
>>> +	[USB_DR_MODE_PERIPHERAL]	= "peripheral",
>>> +	[USB_DR_MODE_OTG]		= "otg",
>>> +};
>>> +
>>> +/**
>>> + * of_usb_get_dr_mode - Get dual role mode for given device_node
>>> + * @np:	Pointer to the given device_node
>>> + *
>>> + * The function gets phy interface string from property 'dr_mode',
>>> + * and returns the correspondig enum usb_phy_dr_mode
>>> + */
>>> +enum usb_phy_dr_mode of_usb_get_dr_mode(struct device_node *np)
>>> +{
>>> +	const char *dr_mode;
>>> +	int err, i;
>>> +
>>> +	err = of_property_read_string(np, "dr_mode", &dr_mode);
>>> +	if (err < 0)
>>> +		return USB_DR_MODE_UNKNOWN;
>>> +
>>> +	for (i = 0; i < ARRAY_SIZE(usb_dr_modes); i++)
>>> +		if (!strcasecmp(dr_mode, usb_dr_modes[i]))
>>> +			return i;
>>> +
>>> +	return USB_DR_MODE_UNKNOWN;
>>> +}
>>> +EXPORT_SYMBOL_GPL(of_usb_get_dr_mode);
>>> +
>>> +static const char *usbphy_modes[] = {
>>> +	[USBPHY_INTERFACE_MODE_NA]	= "",
>>> +	[USBPHY_INTERFACE_MODE_UTMI]	= "utmi",
>>> +	[USBPHY_INTERFACE_MODE_UTMIW]	= "utmi_wide",
>>> +	[USBPHY_INTERFACE_MODE_ULPI]	= "ulpi",
>>> +	[USBPHY_INTERFACE_MODE_SERIAL]	= "serial",
>>> +	[USBPHY_INTERFACE_MODE_HSIC]	= "hsic",
>>> +};
>>> +
>>> +/**
>>> + * of_get_usbphy_mode - Get phy mode for given device_node
>>
>> %s/of_get_usbphy_mode/of_usb_get_phy_mode
>>> + * @np:	Pointer to the given device_node
>>> + *
>>> + * The function gets phy interface string from property 'phy_type',
>>> + * and returns the correspondig enum usb_phy_interface
>>> + */
>>> +enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
>>> +{
>>
>> You agreed to move this function inside usb/phy.. no?
>
> Yes, I did, but as mentioned in the introduction mail, the chipidea
> driver has to determine the phy type even when phy support (aka
> CONFIG_USB_OTG_UTILS) is disabled, so I can't put it in phy/phy.c.
>
> I could add a phy/of.c though. Would that be better?

Yes. I think that would be better.

Thanks
Kishon

[PATCH 2/6] USB: add devicetree helpers for determining dr_mode and phy_type

[Sascha Hauer]

From: Michael Grzeschik <m.grzeschik@pengutronix.de>

This adds two little devicetree helper functions for determining the
dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
the devicetree.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/usb/phy/Makefile |    1 +
 drivers/usb/phy/phy.c    |   10 ++++++++++
 drivers/usb/usb-common.c |   36 ++++++++++++++++++++++++++++++++++++
 include/linux/usb/of.h   |   27 +++++++++++++++++++++++++++
 include/linux/usb/otg.h  |    7 +++++++
 include/linux/usb/phy.h  |    9 +++++++++
 6 files changed, 90 insertions(+)
 create mode 100644 include/linux/usb/of.h

diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 9fa6327..e1be1e8 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -5,6 +5,7 @@
 ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
 
 obj-$(CONFIG_USB_OTG_UTILS)		+= phy.o
+obj-$(CONFIG_OF)			+= of.o
 obj-$(CONFIG_OMAP_USB2)			+= omap-usb2.o
 obj-$(CONFIG_OMAP_USB3)			+= omap-usb3.o
 obj-$(CONFIG_OMAP_CONTROL_USB)		+= omap-control-usb.o
diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
index ef35eb0..3ad4b5c 100644
--- a/drivers/usb/phy/phy.c
+++ b/drivers/usb/phy/phy.c
@@ -1,3 +1,13 @@
+/*
+ * phy.c -- USB phy handling
+ *
+ * Copyright (C) 2004 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
 #include <linux/kernel.h>
 #include <linux/export.h>
 #include <linux/err.h>
diff --git a/drivers/usb/usb-common.c b/drivers/usb/usb-common.c
index d29503e..ad4d87d 100644
--- a/drivers/usb/usb-common.c
+++ b/drivers/usb/usb-common.c
@@ -14,6 +14,9 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/usb/ch9.h>
+#include <linux/of.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
 
 const char *usb_speed_string(enum usb_device_speed speed)
 {
@@ -32,4 +35,37 @@ const char *usb_speed_string(enum usb_device_speed speed)
 }
 EXPORT_SYMBOL_GPL(usb_speed_string);
 
+#ifdef CONFIG_OF
+static const char *usb_dr_modes[] = {
+	[USB_DR_MODE_UNKNOWN]		= "",
+	[USB_DR_MODE_HOST]		= "host",
+	[USB_DR_MODE_PERIPHERAL]	= "peripheral",
+	[USB_DR_MODE_OTG]		= "otg",
+};
+
+/**
+ * of_usb_get_dr_mode - Get dual role mode for given device_node
+ * @np:	Pointer to the given device_node
+ *
+ * The function gets phy interface string from property 'dr_mode',
+ * and returns the correspondig enum usb_dr_mode
+ */
+enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+	const char *dr_mode;
+	int err, i;
+
+	err = of_property_read_string(np, "dr_mode", &dr_mode);
+	if (err < 0)
+		return USB_DR_MODE_UNKNOWN;
+
+	for (i = 0; i < ARRAY_SIZE(usb_dr_modes); i++)
+		if (!strcmp(dr_mode, usb_dr_modes[i]))
+			return i;
+
+	return USB_DR_MODE_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(of_usb_get_dr_mode);
+#endif
+
 MODULE_LICENSE("GPL");
diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h
new file mode 100644
index 0000000..4681a20
--- /dev/null
+++ b/include/linux/usb/of.h
@@ -0,0 +1,27 @@
+/*
+ * OF helpers for usb devices.
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_USB_OF_H
+#define __LINUX_USB_OF_H
+
+#include <linux/usb/phy.h>
+
+#ifdef CONFIG_OF
+enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np);
+enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np);
+#else
+static inline enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
+{
+	return USBPHY_INTERFACE_MODE_UNKNOWN;
+}
+
+static inline enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+	return USB_DR_MODE_UNKNOWN;
+}
+#endif
+
+#endif /* __LINUX_USB_OF_H */
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index e8a5fe8..4e8bfbb 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -99,4 +99,11 @@ otg_start_srp(struct usb_otg *otg)
 /* for OTG controller drivers (and maybe other stuff) */
 extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
 
+enum usb_dr_mode {
+	USB_DR_MODE_UNKNOWN,
+	USB_DR_MODE_HOST,
+	USB_DR_MODE_PERIPHERAL,
+	USB_DR_MODE_OTG,
+};
+
 #endif /* __LINUX_USB_OTG_H */
diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h
index 15847cb..5edddb1 100644
--- a/include/linux/usb/phy.h
+++ b/include/linux/usb/phy.h
@@ -12,6 +12,15 @@
 #include <linux/notifier.h>
 #include <linux/usb.h>
 
+enum usb_phy_interface {
+	USBPHY_INTERFACE_MODE_UNKNOWN,
+	USBPHY_INTERFACE_MODE_UTMI,
+	USBPHY_INTERFACE_MODE_UTMIW,
+	USBPHY_INTERFACE_MODE_ULPI,
+	USBPHY_INTERFACE_MODE_SERIAL,
+	USBPHY_INTERFACE_MODE_HSIC,
+};
+
 enum usb_phy_events {
 	USB_EVENT_NONE,         /* no events or cable disconnected */
 	USB_EVENT_VBUS,         /* vbus valid event */
-- 
1.7.10.4

[PATCH 2/6] USB: add devicetree helpers for determining dr_mode and phy_type

[kishon]

Hi,

On Thursday 31 January 2013 02:31 PM, Sascha Hauer wrote:
> From: Michael Grzeschik <m.grzeschik@pengutronix.de>
>
> This adds two little devicetree helper functions for determining the
> dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
> the devicetree.
>
> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>   drivers/usb/phy/Makefile |    1 +
>   drivers/usb/phy/phy.c    |   10 ++++++++++
>   drivers/usb/usb-common.c |   36 ++++++++++++++++++++++++++++++++++++
>   include/linux/usb/of.h   |   27 +++++++++++++++++++++++++++
>   include/linux/usb/otg.h  |    7 +++++++
>   include/linux/usb/phy.h  |    9 +++++++++
>   6 files changed, 90 insertions(+)
>   create mode 100644 include/linux/usb/of.h
>
> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
> index 9fa6327..e1be1e8 100644
> --- a/drivers/usb/phy/Makefile
> +++ b/drivers/usb/phy/Makefile
> @@ -5,6 +5,7 @@
>   ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
>
>   obj-$(CONFIG_USB_OTG_UTILS)		+= phy.o
> +obj-$(CONFIG_OF)			+= of.o

You've missed doing "git add ..usb/phy/of.c".

>   obj-$(CONFIG_OMAP_USB2)			+= omap-usb2.o
>   obj-$(CONFIG_OMAP_USB3)			+= omap-usb3.o
>   obj-$(CONFIG_OMAP_CONTROL_USB)		+= omap-control-usb.o
> diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
> index ef35eb0..3ad4b5c 100644
> --- a/drivers/usb/phy/phy.c
> +++ b/drivers/usb/phy/phy.c
> @@ -1,3 +1,13 @@
> +/*
> + * phy.c -- USB phy handling
> + *
> + * Copyright (C) 2004 Texas Instruments

it's 2013 already :-P
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.

But your *MODULE_LICENSE("GPL")* below tells it's only GPL.
> + */
.
.
<snip>
.
.

>   MODULE_LICENSE("GPL");

Thanks
Kishon

[PATCH 4/6] usb: chipidea: add PTW and PTS handling

[Matthieu CASTET]

Sascha Hauer a ?crit :
> On Wed, Jan 30, 2013 at 05:54:54PM +0100, Matthieu CASTET wrote:
>>> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
>>> index 57cae1f..dcb650f 100644
>>> --- a/drivers/usb/chipidea/core.c
>>> +++ b/drivers/usb/chipidea/core.c
>>> @@ -67,6 +67,8 @@
>>>  #include <linux/usb/gadget.h>
>>>  #include <linux/usb/otg.h>
>>>  #include <linux/usb/chipidea.h>
>>> +#include <linux/usb/of.h>
>>> +#include <linux/phy.h>
>>>  
>>>  #include "ci.h"
>>>  #include "udc.h"
>>> @@ -211,6 +213,42 @@ static int hw_device_init(struct ci13xxx *ci, void __iomem *base)
>>>  	return 0;
>>>  }
>>>  
>>> +static void hw_phymode_configure(struct ci13xxx *ci)
>>> +{
>>> +	u32 portsc;
>>> +
>>> +	/*
>>> +	 * The lpm version has the corresponding bits in the devlc register.
>>> +	 * Currently not implemented.
>>> +	 */
>>> +	if (ci->hw_bank.lpm)
>>> +		return;
>> Why you don't implement it ?
>>
>> If you don't implement it, I believe you should add a warning in order to catch
>> it when used with lpm devices.
> 
> I'm against adding a warning because current users seem to go well
> without this setting. Adding a warning would lead to more confusion than
> it would help.
> 
> I could try and implement it, though I'm unsure about the register
> layout.
> 
> What I know from an earlier post from you is this:
> 
> #define LPM_PTS(d)  (((d)>>29)&7)
> #define LPM_STS     BIT(28) /* serial transceiver select */
> #define LPM_PTW     BIT(27) /* parallel transceiver width */
> 
> Do you also know how LPM_PTS is decoded?

I will say the same as not lpm device :

PTS is  made up from PORTSCx bits 25, 30 and 31.

PTS is  made up from devlc bits 31, 30 and 29.


Also in my datasheet, they give a way to check if the bits are read only or read
write [1]. I don't know if it is worth the trouble to check it.


Matthieu


[1]
PTS
This register bit pair is used in conjunction with the configuration constant
VUSB_HS_PHY_TYPE to control which parallel transceiver interface is selected. If
VUSB_HS_PHY_TYPE is set for 0, 1, 2, 3, 8 or 10 then this bit is read only. If
VUSB_HS_PHY_TYPE is 4, 5, 6, 7, 9 or 11 then this bit is read/write.

This field is reset to:
'000b' if VUSB_HS_PHY_TYPE = 0, 4 ? UTMI/UTMI+
'001b' if VUSB_HS_PHY_TYPE = 1, 5 ? ULPI DDR
'010b' if VUSB_HS_PHY_TYPE = 2, 6 ? ULPI
'011b' if VUSB_HS_PHY_TYPE = 3, 7, 8, 9 ? Serial/1.1 PHY/IC_USB (FS Only)
'100b' if VUSB_HS_PHY_TYPE = 10, 11 ? UTMI for HSIC PHY

[PATCH 2/6] USB: add devicetree helpers for determining dr_mode and phy_type

[Greg KH]

On Thu, Jan 31, 2013 at 10:01:09AM +0100, Sascha Hauer wrote:
> From: Michael Grzeschik <m.grzeschik@pengutronix.de>
> 
> This adds two little devicetree helper functions for determining the
> dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
> the devicetree.
> 
> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  drivers/usb/phy/Makefile |    1 +
>  drivers/usb/phy/phy.c    |   10 ++++++++++
>  drivers/usb/usb-common.c |   36 ++++++++++++++++++++++++++++++++++++
>  include/linux/usb/of.h   |   27 +++++++++++++++++++++++++++
>  include/linux/usb/otg.h  |    7 +++++++
>  include/linux/usb/phy.h  |    9 +++++++++
>  6 files changed, 90 insertions(+)
>  create mode 100644 include/linux/usb/of.h
> 
> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
> index 9fa6327..e1be1e8 100644
> --- a/drivers/usb/phy/Makefile
> +++ b/drivers/usb/phy/Makefile
> @@ -5,6 +5,7 @@
>  ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
>  
>  obj-$(CONFIG_USB_OTG_UTILS)		+= phy.o
> +obj-$(CONFIG_OF)			+= of.o
>  obj-$(CONFIG_OMAP_USB2)			+= omap-usb2.o
>  obj-$(CONFIG_OMAP_USB3)			+= omap-usb3.o
>  obj-$(CONFIG_OMAP_CONTROL_USB)		+= omap-control-usb.o
> diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
> index ef35eb0..3ad4b5c 100644
> --- a/drivers/usb/phy/phy.c
> +++ b/drivers/usb/phy/phy.c
> @@ -1,3 +1,13 @@
> +/*
> + * phy.c -- USB phy handling
> + *
> + * Copyright (C) 2004 Texas Instruments
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */

Do you really mean to change the license of the file from GPLv2 to
GPLv2+?  Did TI agree to that licening change?  I need some
documentation from some TI people before I can ever accept something
like this.

thanks,

greg k-h

[PATCH 2/6] USB: add devicetree helpers for determining dr_mode and phy_type

[Sascha Hauer]

On Thu, Jan 31, 2013 at 10:20:59AM +0100, Greg KH wrote:
> On Thu, Jan 31, 2013 at 10:01:09AM +0100, Sascha Hauer wrote:
> > From: Michael Grzeschik <m.grzeschik@pengutronix.de>
> > 
> > This adds two little devicetree helper functions for determining the
> > dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
> > the devicetree.
> > 
> > Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> > Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > ---
> >  drivers/usb/phy/Makefile |    1 +
> >  drivers/usb/phy/phy.c    |   10 ++++++++++
> >  drivers/usb/usb-common.c |   36 ++++++++++++++++++++++++++++++++++++
> >  include/linux/usb/of.h   |   27 +++++++++++++++++++++++++++
> >  include/linux/usb/otg.h  |    7 +++++++
> >  include/linux/usb/phy.h  |    9 +++++++++
> >  6 files changed, 90 insertions(+)
> >  create mode 100644 include/linux/usb/of.h
> > 
> > diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
> > index 9fa6327..e1be1e8 100644
> > --- a/drivers/usb/phy/Makefile
> > +++ b/drivers/usb/phy/Makefile
> > @@ -5,6 +5,7 @@
> >  ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
> >  
> >  obj-$(CONFIG_USB_OTG_UTILS)		+= phy.o
> > +obj-$(CONFIG_OF)			+= of.o
> >  obj-$(CONFIG_OMAP_USB2)			+= omap-usb2.o
> >  obj-$(CONFIG_OMAP_USB3)			+= omap-usb3.o
> >  obj-$(CONFIG_OMAP_CONTROL_USB)		+= omap-control-usb.o
> > diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
> > index ef35eb0..3ad4b5c 100644
> > --- a/drivers/usb/phy/phy.c
> > +++ b/drivers/usb/phy/phy.c
> > @@ -1,3 +1,13 @@
> > +/*
> > + * phy.c -- USB phy handling
> > + *
> > + * Copyright (C) 2004 Texas Instruments
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + */
> 
> Do you really mean to change the license of the file from GPLv2 to
> GPLv2+?  Did TI agree to that licening change?  I need some
> documentation from some TI people before I can ever accept something
> like this.

Sorry, the hunk above belongs to patch 1/6. I did not change the
license, the header is a copy from drivers/usb/otg/otg.c which was
GPLv2+ already.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[PATCH 2/6] USB: add devicetree helpers for determining dr_mode and phy_type

[Sascha Hauer]

On Thu, Jan 31, 2013 at 02:42:48PM +0530, kishon wrote:
> Hi,
> 
> On Thursday 31 January 2013 02:31 PM, Sascha Hauer wrote:
> >From: Michael Grzeschik <m.grzeschik@pengutronix.de>
> >
> >This adds two little devicetree helper functions for determining the
> >dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
> >the devicetree.
> >
> >Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> >Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
> >Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> >---
> >  drivers/usb/phy/Makefile |    1 +
> >  drivers/usb/phy/phy.c    |   10 ++++++++++
> >  drivers/usb/usb-common.c |   36 ++++++++++++++++++++++++++++++++++++
> >  include/linux/usb/of.h   |   27 +++++++++++++++++++++++++++
> >  include/linux/usb/otg.h  |    7 +++++++
> >  include/linux/usb/phy.h  |    9 +++++++++
> >  6 files changed, 90 insertions(+)
> >  create mode 100644 include/linux/usb/of.h
> >
> >diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
> >index 9fa6327..e1be1e8 100644
> >--- a/drivers/usb/phy/Makefile
> >+++ b/drivers/usb/phy/Makefile
> >@@ -5,6 +5,7 @@
> >  ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
> >
> >  obj-$(CONFIG_USB_OTG_UTILS)		+= phy.o
> >+obj-$(CONFIG_OF)			+= of.o
> 
> You've missed doing "git add ..usb/phy/of.c".
> 
> >  obj-$(CONFIG_OMAP_USB2)			+= omap-usb2.o
> >  obj-$(CONFIG_OMAP_USB3)			+= omap-usb3.o
> >  obj-$(CONFIG_OMAP_CONTROL_USB)		+= omap-control-usb.o
> >diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
> >index ef35eb0..3ad4b5c 100644
> >--- a/drivers/usb/phy/phy.c
> >+++ b/drivers/usb/phy/phy.c
> >@@ -1,3 +1,13 @@
> >+/*
> >+ * phy.c -- USB phy handling
> >+ *
> >+ * Copyright (C) 2004 Texas Instruments
> 
> it's 2013 already :-P
> >+ *
> >+ * This program is free software; you can redistribute it and/or modify
> >+ * it under the terms of the GNU General Public License as published by
> >+ * the Free Software Foundation; either version 2 of the License, or
> >+ * (at your option) any later version.
> 
> But your *MODULE_LICENSE("GPL")* below tells it's only GPL.

The MODULE_LICENSE("GPL") is in usb-common.c, not in the file I added.

Sascha

> .
> <snip>
> .
> .
> 
> >  MODULE_LICENSE("GPL");
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[PATCH 2/6] USB: add devicetree helpers for determining dr_mode and phy_type

[kishon]

On Thursday 31 January 2013 02:58 PM, Sascha Hauer wrote:
> On Thu, Jan 31, 2013 at 02:42:48PM +0530, kishon wrote:
>> Hi,
>>
>> On Thursday 31 January 2013 02:31 PM, Sascha Hauer wrote:
>>> From: Michael Grzeschik <m.grzeschik@pengutronix.de>
>>>
>>> This adds two little devicetree helper functions for determining the
>>> dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
>>> the devicetree.
>>>
>>> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
>>> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
>>> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
>>> ---
>>>   drivers/usb/phy/Makefile |    1 +
>>>   drivers/usb/phy/phy.c    |   10 ++++++++++
>>>   drivers/usb/usb-common.c |   36 ++++++++++++++++++++++++++++++++++++
>>>   include/linux/usb/of.h   |   27 +++++++++++++++++++++++++++
>>>   include/linux/usb/otg.h  |    7 +++++++
>>>   include/linux/usb/phy.h  |    9 +++++++++
>>>   6 files changed, 90 insertions(+)
>>>   create mode 100644 include/linux/usb/of.h
>>>
>>> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
>>> index 9fa6327..e1be1e8 100644
>>> --- a/drivers/usb/phy/Makefile
>>> +++ b/drivers/usb/phy/Makefile
>>> @@ -5,6 +5,7 @@
>>>   ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
>>>
>>>   obj-$(CONFIG_USB_OTG_UTILS)		+= phy.o
>>> +obj-$(CONFIG_OF)			+= of.o
>>
>> You've missed doing "git add ..usb/phy/of.c".
>>
>>>   obj-$(CONFIG_OMAP_USB2)			+= omap-usb2.o
>>>   obj-$(CONFIG_OMAP_USB3)			+= omap-usb3.o
>>>   obj-$(CONFIG_OMAP_CONTROL_USB)		+= omap-control-usb.o
>>> diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
>>> index ef35eb0..3ad4b5c 100644
>>> --- a/drivers/usb/phy/phy.c
>>> +++ b/drivers/usb/phy/phy.c
>>> @@ -1,3 +1,13 @@
>>> +/*
>>> + * phy.c -- USB phy handling
>>> + *
>>> + * Copyright (C) 2004 Texas Instruments
>>
>> it's 2013 already :-P
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License as published by
>>> + * the Free Software Foundation; either version 2 of the License, or
>>> + * (at your option) any later version.
>>
>> But your *MODULE_LICENSE("GPL")* below tells it's only GPL.
>
> The MODULE_LICENSE("GPL") is in usb-common.c, not in the file I added.

huh.. just noticed. sorry for the noise.

Thanks
Kishon

[PATCH 4/6] usb: chipidea: add PTW and PTS handling

[Sascha Hauer]

On Thu, Jan 31, 2013 at 10:15:54AM +0100, Matthieu CASTET wrote:
> >> Why you don't implement it ?
> >>
> >> If you don't implement it, I believe you should add a warning in order to catch
> >> it when used with lpm devices.
> > 
> > I'm against adding a warning because current users seem to go well
> > without this setting. Adding a warning would lead to more confusion than
> > it would help.
> > 
> > I could try and implement it, though I'm unsure about the register
> > layout.
> > 
> > What I know from an earlier post from you is this:
> > 
> > #define LPM_PTS(d)  (((d)>>29)&7)
> > #define LPM_STS     BIT(28) /* serial transceiver select */
> > #define LPM_PTW     BIT(27) /* parallel transceiver width */
> > 
> > Do you also know how LPM_PTS is decoded?
> 
> I will say the same as not lpm device :
> 
> PTS is  made up from PORTSCx bits 25, 30 and 31.

Here it is

PTS0 -> bit 30
PTS1 -> bit 31
PTS2 -> bit 25

> 
> PTS is  made up from devlc bits 31, 30 and 29.

In my new series I now assumed:

PTS0 -> bit 29
PTS1 -> bit 30
PTS2 -> bit 31

> 
> 
> Also in my datasheet, they give a way to check if the bits are read only or read
> write [1]. I don't know if it is worth the trouble to check it.
> 
> 
> Matthieu
> 
> 
> [1]
> PTS
> This register bit pair is used in conjunction with the configuration constant
> VUSB_HS_PHY_TYPE to control which parallel transceiver interface is selected. If
> VUSB_HS_PHY_TYPE is set for 0, 1, 2, 3, 8 or 10 then this bit is read only. If
> VUSB_HS_PHY_TYPE is 4, 5, 6, 7, 9 or 11 then this bit is read/write.
> 
> This field is reset to:
> '000b' if VUSB_HS_PHY_TYPE = 0, 4 ? UTMI/UTMI+
> '001b' if VUSB_HS_PHY_TYPE = 1, 5 ? ULPI DDR
> '010b' if VUSB_HS_PHY_TYPE = 2, 6 ? ULPI
> '011b' if VUSB_HS_PHY_TYPE = 3, 7, 8, 9 ? Serial/1.1 PHY/IC_USB (FS Only)
> '100b' if VUSB_HS_PHY_TYPE = 10, 11 ? UTMI for HSIC PHY

Ok, this seems to match my assumption, except that our controller marks
the 'ULPI DDR' setting as reserved.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[PATCH 2/6] USB: add devicetree helpers for determining dr_mode and phy_type

[Peter Chen]

On Thu, Jan 31, 2013 at 10:01:09AM +0100, Sascha Hauer wrote:
> From: Michael Grzeschik <m.grzeschik@pengutronix.de>
> 
> 
> +	for (i = 0; i < ARRAY_SIZE(usb_dr_modes); i++)
> +		if (!strcmp(dr_mode, usb_dr_modes[i]))
> +			return i;

if (strcmp(dr_mode, usb_dr_modes[i]) == 0) may be more friendly.

> +
> +#ifndef __LINUX_USB_OF_H
> +#define __LINUX_USB_OF_H
> +
> +#include <linux/usb/phy.h>
> +
> +#ifdef CONFIG_OF
> +enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np);

Will you put definition to phy.c, I can't find it at this version

> index e8a5fe8..4e8bfbb 100644
> --- a/include/linux/usb/otg.h
> +++ b/include/linux/usb/otg.h
> @@ -99,4 +99,11 @@ otg_start_srp(struct usb_otg *otg)
>  /* for OTG controller drivers (and maybe other stuff) */
>  extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
>  
> +enum usb_dr_mode {
> +	USB_DR_MODE_UNKNOWN,
> +	USB_DR_MODE_HOST,
> +	USB_DR_MODE_PERIPHERAL,
> +	USB_DR_MODE_OTG,
> +};
> +

I am not sure if otg.h is a good place to put this, in fact, we need
a common header file for it.
-- 

Best Regards,
Peter Chen

[PATCH 2/6] USB: add devicetree helpers for determining dr_mode and phy_type

[Sascha Hauer]

On Thu, Jan 31, 2013 at 06:01:08PM +0800, Peter Chen wrote:
> On Thu, Jan 31, 2013 at 10:01:09AM +0100, Sascha Hauer wrote:
> > From: Michael Grzeschik <m.grzeschik@pengutronix.de>
> > 
> > 
> > +	for (i = 0; i < ARRAY_SIZE(usb_dr_modes); i++)
> > +		if (!strcmp(dr_mode, usb_dr_modes[i]))
> > +			return i;
> 
> if (strcmp(dr_mode, usb_dr_modes[i]) == 0) may be more friendly.
> 
> > +
> > +#ifndef __LINUX_USB_OF_H
> > +#define __LINUX_USB_OF_H
> > +
> > +#include <linux/usb/phy.h>
> > +
> > +#ifdef CONFIG_OF
> > +enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np);
> 
> Will you put definition to phy.c, I can't find it at this version

This goes to drivers/usb/phy/of.c Sorry, as Kishon noted I missed to git
add the file. See the attached updated patch.

> 
> > index e8a5fe8..4e8bfbb 100644
> > --- a/include/linux/usb/otg.h
> > +++ b/include/linux/usb/otg.h
> > @@ -99,4 +99,11 @@ otg_start_srp(struct usb_otg *otg)
> >  /* for OTG controller drivers (and maybe other stuff) */
> >  extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
> >  
> > +enum usb_dr_mode {
> > +	USB_DR_MODE_UNKNOWN,
> > +	USB_DR_MODE_HOST,
> > +	USB_DR_MODE_PERIPHERAL,
> > +	USB_DR_MODE_OTG,
> > +};
> > +
> 
> I am not sure if otg.h is a good place to put this, in fact, we need
> a common header file for it.

Well linux/usb/otg.h is at least a header which can be included safely
by everyone interested in usb_dr_mode. Anyway, I'm open for better
suggestions, I just hesitated to add a new file just for this enum.

Sascha


>From 19c1a6552d6aa93f5ff354a224de0679d55a8126 Mon Sep 17 00:00:00 2001
From: Michael Grzeschik <m.grzeschik@pengutronix.de>
Date: Tue, 6 Nov 2012 16:10:10 +0100
Subject: [PATCH] USB: add devicetree helpers for determining dr_mode and
 phy_type

This adds two little devicetree helper functions for determining the
dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
the devicetree.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/usb/phy/Makefile |    1 +
 drivers/usb/phy/of.c     |   47 ++++++++++++++++++++++++++++++++++++++++++++++
 drivers/usb/usb-common.c |   36 +++++++++++++++++++++++++++++++++++
 include/linux/usb/of.h   |   27 ++++++++++++++++++++++++++
 include/linux/usb/otg.h  |    7 +++++++
 include/linux/usb/phy.h  |    9 +++++++++
 6 files changed, 127 insertions(+)
 create mode 100644 drivers/usb/phy/of.c
 create mode 100644 include/linux/usb/of.h

diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 9fa6327..e1be1e8 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -5,6 +5,7 @@
 ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
 
 obj-$(CONFIG_USB_OTG_UTILS)		+= phy.o
+obj-$(CONFIG_OF)			+= of.o
 obj-$(CONFIG_OMAP_USB2)			+= omap-usb2.o
 obj-$(CONFIG_OMAP_USB3)			+= omap-usb3.o
 obj-$(CONFIG_OMAP_CONTROL_USB)		+= omap-control-usb.o
diff --git a/drivers/usb/phy/of.c b/drivers/usb/phy/of.c
new file mode 100644
index 0000000..e6f3b74
--- /dev/null
+++ b/drivers/usb/phy/of.c
@@ -0,0 +1,47 @@
+/*
+ * USB of helper code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
+
+static const char *usbphy_modes[] = {
+	[USBPHY_INTERFACE_MODE_UNKNOWN]	= "",
+	[USBPHY_INTERFACE_MODE_UTMI]	= "utmi",
+	[USBPHY_INTERFACE_MODE_UTMIW]	= "utmi_wide",
+	[USBPHY_INTERFACE_MODE_ULPI]	= "ulpi",
+	[USBPHY_INTERFACE_MODE_SERIAL]	= "serial",
+	[USBPHY_INTERFACE_MODE_HSIC]	= "hsic",
+};
+
+/**
+ * of_usb_get_phy_mode - Get phy mode for given device_node
+ * @np:	Pointer to the given device_node
+ *
+ * The function gets phy interface string from property 'phy_type',
+ * and returns the correspondig enum usb_phy_interface
+ */
+enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
+{
+	const char *phy_type;
+	int err, i;
+
+	err = of_property_read_string(np, "phy_type", &phy_type);
+	if (err < 0)
+		return USBPHY_INTERFACE_MODE_UNKNOWN;
+
+	for (i = 0; i < ARRAY_SIZE(usbphy_modes); i++)
+		if (!strcmp(phy_type, usbphy_modes[i]))
+			return i;
+
+	return USBPHY_INTERFACE_MODE_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(of_usb_get_phy_mode);
diff --git a/drivers/usb/usb-common.c b/drivers/usb/usb-common.c
index d29503e..ad4d87d 100644
--- a/drivers/usb/usb-common.c
+++ b/drivers/usb/usb-common.c
@@ -14,6 +14,9 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/usb/ch9.h>
+#include <linux/of.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
 
 const char *usb_speed_string(enum usb_device_speed speed)
 {
@@ -32,4 +35,37 @@ const char *usb_speed_string(enum usb_device_speed speed)
 }
 EXPORT_SYMBOL_GPL(usb_speed_string);
 
+#ifdef CONFIG_OF
+static const char *usb_dr_modes[] = {
+	[USB_DR_MODE_UNKNOWN]		= "",
+	[USB_DR_MODE_HOST]		= "host",
+	[USB_DR_MODE_PERIPHERAL]	= "peripheral",
+	[USB_DR_MODE_OTG]		= "otg",
+};
+
+/**
+ * of_usb_get_dr_mode - Get dual role mode for given device_node
+ * @np:	Pointer to the given device_node
+ *
+ * The function gets phy interface string from property 'dr_mode',
+ * and returns the correspondig enum usb_dr_mode
+ */
+enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+	const char *dr_mode;
+	int err, i;
+
+	err = of_property_read_string(np, "dr_mode", &dr_mode);
+	if (err < 0)
+		return USB_DR_MODE_UNKNOWN;
+
+	for (i = 0; i < ARRAY_SIZE(usb_dr_modes); i++)
+		if (!strcmp(dr_mode, usb_dr_modes[i]))
+			return i;
+
+	return USB_DR_MODE_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(of_usb_get_dr_mode);
+#endif
+
 MODULE_LICENSE("GPL");
diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h
new file mode 100644
index 0000000..4681a20
--- /dev/null
+++ b/include/linux/usb/of.h
@@ -0,0 +1,27 @@
+/*
+ * OF helpers for usb devices.
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_USB_OF_H
+#define __LINUX_USB_OF_H
+
+#include <linux/usb/phy.h>
+
+#ifdef CONFIG_OF
+enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np);
+enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np);
+#else
+static inline enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
+{
+	return USBPHY_INTERFACE_MODE_UNKNOWN;
+}
+
+static inline enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+	return USB_DR_MODE_UNKNOWN;
+}
+#endif
+
+#endif /* __LINUX_USB_OF_H */
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index e8a5fe8..4e8bfbb 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -99,4 +99,11 @@ otg_start_srp(struct usb_otg *otg)
 /* for OTG controller drivers (and maybe other stuff) */
 extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
 
+enum usb_dr_mode {
+	USB_DR_MODE_UNKNOWN,
+	USB_DR_MODE_HOST,
+	USB_DR_MODE_PERIPHERAL,
+	USB_DR_MODE_OTG,
+};
+
 #endif /* __LINUX_USB_OTG_H */
diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h
index 15847cb..5edddb1 100644
--- a/include/linux/usb/phy.h
+++ b/include/linux/usb/phy.h
@@ -12,6 +12,15 @@
 #include <linux/notifier.h>
 #include <linux/usb.h>
 
+enum usb_phy_interface {
+	USBPHY_INTERFACE_MODE_UNKNOWN,
+	USBPHY_INTERFACE_MODE_UTMI,
+	USBPHY_INTERFACE_MODE_UTMIW,
+	USBPHY_INTERFACE_MODE_ULPI,
+	USBPHY_INTERFACE_MODE_SERIAL,
+	USBPHY_INTERFACE_MODE_HSIC,
+};
+
 enum usb_phy_events {
 	USB_EVENT_NONE,         /* no events or cable disconnected */
 	USB_EVENT_VBUS,         /* vbus valid event */
-- 
1.7.10.4

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |