From mboxrd@z Thu Jan  1 00:00:00 1970
From: tony@atomide.com (Tony Lindgren)
Date: Fri, 1 Feb 2013 10:35:14 -0800
Subject: [PATCH 1/2] ARM: OMAP2+: omap2plus_defconfig: enable TFP410
 chip support
In-Reply-To: <CABxcv=nyuOJaLcHR=DgnXSxLkF-TqU2_mxt=46qZVWg_Vhh_9Q@mail.gmail.com>
References: <1355920420-20852-1-git-send-email-javier.martinez@collabora.co.uk>
 <50D1DC95.8090003@ti.com>
 <CABxcv=nyuOJaLcHR=DgnXSxLkF-TqU2_mxt=46qZVWg_Vhh_9Q@mail.gmail.com>
Message-ID: <20130201183513.GK22517@atomide.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

* Javier Martinez Canillas <javier@dowhile0.org> [130110 01:31]:
> On Wed, Dec 19, 2012 at 4:26 PM, Tomi Valkeinen <tomi.valkeinen@ti.com> wrote:
> > On 2012-12-19 14:33, Javier Martinez Canillas wrote:
> >> Many OMAP3 based boards such as Beagle, Overo and IGEP use
> >> the TFP410 DPI-to-DVI chip. So, it's good to have it built
> >> as a module by default on OMAP2+ config.
> >
> > Also on OMAP4 boards, like Panda.
> >
> >> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
> >> ---
> >>  arch/arm/configs/omap2plus_defconfig |    1 +
> >>  1 files changed, 1 insertions(+), 0 deletions(-)
> >>
> >> diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
> >> index a1dc5c0..da530a0 100644
> >> --- a/arch/arm/configs/omap2plus_defconfig
> >> +++ b/arch/arm/configs/omap2plus_defconfig
> >> @@ -146,6 +146,7 @@ CONFIG_OMAP2_DSS_SDI=y
> >>  CONFIG_OMAP2_DSS_DSI=y
> >>  CONFIG_FB_OMAP2=m
> >>  CONFIG_PANEL_GENERIC_DPI=m
> >> +CONFIG_PANEL_TFP410=m
> >>  CONFIG_PANEL_SHARP_LS037V7DW01=m
> >>  CONFIG_PANEL_NEC_NL8048HL11_01B=m
> >>  CONFIG_PANEL_TAAL=m
> >>
> >
> > For both patches:
> >
> > Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> >
> >  Tomi
> >
> 
> Hello Tony,
> 
> Any comments on these?

No comments, applying into omap-for-v3.9/board thanks.

Tony