From: grant.likely@secretlab.ca (Grant Likely)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 8/9] gpiolib: use gpio_chips list in gpio_to_desc
Date: Sat, 09 Feb 2013 09:58:03 +0000 [thread overview]
Message-ID: <20130209095803.61C653E2CF2@localhost> (raw)
In-Reply-To: <1359822572-26009-10-git-send-email-acourbot@nvidia.com>
On Sun, 3 Feb 2013 01:29:31 +0900, Alexandre Courbot <acourbot@nvidia.com> wrote:
> Parse the list of chips to find the descriptor corresponding to a GPIO
> number instead of directly picking the entry of the global gpio_desc[]
> array, which is due to be removed.
>
> This turns the complexity of converting a GPIO number into a descriptor
> from O(1) to O(n) where n is the number of GPIO chips in the system.
> Since n is ought to be small anyway, there should be no noticeable
> performance impact. Moreover, GPIO users who care for speed already have
> implemented their own gpio_get_value() and gpio_set_value() with a
> fast path for the GPIO numbers that matter and this change does not
> affect such use cases.
>
> The descriptor-based GPIO API, due to be introduced soon, will make this
> lookup unnecessary.
I'm actually going to NAK this one. This is a hot path. Having a O(1)
lookup from gpio number to gpio desc is important. I know you want to be
rid of the gpio_desc table entirely, but in this case I think it is
warranted. However, you can change the gpio_desc table to be a table of
pointers to gpio_descs instead of a table of gpio_descs. That would save
a lot of memory since unused GPIOs wouldn't have gpio_descs associated
with them. It is also the mechanism used by the IRQ subsystem.
So, it makes sense for the primary gpio_chip lookup to be the list, but
the table needs to stick around as a secondary lookup.
g.
>
> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
> ---
> drivers/gpio/gpiolib.c | 19 +++++++++++++++----
> 1 file changed, 15 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
> index 9599b9a..0247c48 100644
> --- a/drivers/gpio/gpiolib.c
> +++ b/drivers/gpio/gpiolib.c
> @@ -122,10 +122,21 @@ static int gpio_chip_hwgpio(const struct gpio_desc *desc)
> */
> static struct gpio_desc *gpio_to_desc(unsigned gpio)
> {
> - if (WARN(!gpio_is_valid(gpio), "invalid GPIO %d\n", gpio))
> - return NULL;
> - else
> - return &gpio_desc[gpio];
> + struct gpio_chip *chip;
> +
> + list_for_each_entry(chip, &gpio_chips, list) {
> + int gpio_min = chip->base;
> + int gpio_max = gpio_min + chip->ngpio;
> + if (gpio >= gpio_min && gpio < gpio_max)
> + return &chip->desc[gpio - gpio_min];
> + else if (gpio < gpio_min)
> + /* gpio_chips are ordered by base, so we won't get any
> + * hit if we arrive here... */
> + break;
> + }
> +
> + pr_warn("%s: no registered chip to handle GPIO %d\n", __func__, gpio);
> + return NULL;
> }
>
> /**
> --
> 1.8.1.1
>
--
Grant Likely, B.Sc, P.Eng.
Secret Lab Technologies, Ltd.
next prev parent reply other threads:[~2013-02-09 9:58 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-02 16:29 [PATCH 0/9] gpiolib: remove gpio_desc[] static array Alexandre Courbot
2013-02-02 16:29 ` Alexandre Courbot
2013-02-02 16:29 ` [PATCH 1/9] gpiolib: link all gpio_chips using a list Alexandre Courbot
2013-02-05 17:00 ` Linus Walleij
2013-02-09 9:20 ` Grant Likely
2013-02-02 16:29 ` [PATCH 2/9] gpiolib: use gpio_chips list in gpiolib_sysfs_init Alexandre Courbot
2013-02-05 17:04 ` Linus Walleij
2013-02-09 9:22 ` Grant Likely
2013-02-02 16:29 ` [PATCH 3/9] gpiolib: use gpio_chips list in gpiochip_find Alexandre Courbot
2013-02-05 17:05 ` Linus Walleij
2013-02-09 9:25 ` Grant Likely
2013-02-02 16:29 ` [PATCH 4/9] gpiolib: use gpio_chips list in sysfs ops Alexandre Courbot
2013-02-05 17:15 ` Linus Walleij
2013-02-09 9:37 ` Grant Likely
2013-02-09 13:53 ` Alexandre Courbot
2013-02-02 16:29 ` [PATCH 5/9] gpiolib: use gpio_chips list in gpiochip_find_base Alexandre Courbot
2013-02-05 17:21 ` Linus Walleij
2013-02-06 4:48 ` Alex Courbot
2013-02-09 9:47 ` Grant Likely
2013-02-02 16:29 ` [PATCH 6/9] gpiolib: use descriptors internally Alexandre Courbot
2013-02-05 17:53 ` Linus Walleij
2013-02-07 6:57 ` Alexandre Courbot
2013-02-09 9:17 ` Grant Likely
2013-02-11 14:09 ` Linus Walleij
2013-02-11 15:40 ` Paul Mundt
2013-02-11 17:39 ` Stephen Warren
2013-02-12 12:29 ` Linus Walleij
2013-02-12 15:59 ` Paul Mundt
2013-02-12 17:18 ` Arnd Bergmann
2013-02-09 13:11 ` Grant Likely
2013-02-09 14:15 ` Alexandre Courbot
2013-02-09 13:24 ` Grant Likely
2013-02-09 14:18 ` Alexandre Courbot
2013-02-02 16:29 ` [PATCH 7/9] gpiolib: let gpio_chip reference its descriptors Alexandre Courbot
2013-02-05 18:00 ` Linus Walleij
2013-02-09 13:28 ` Grant Likely
2013-02-02 16:29 ` [PATCH 8/9] gpiolib: use gpio_chips list in gpio_to_desc Alexandre Courbot
2013-02-05 18:01 ` Linus Walleij
2013-02-09 9:58 ` Grant Likely [this message]
2013-02-09 14:21 ` Alexandre Courbot
2013-02-09 14:37 ` Grant Likely
2013-02-02 16:29 ` [PATCH 9/9] gpiolib: dynamically allocate descriptors array Alexandre Courbot
2013-02-05 18:02 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130209095803.61C653E2CF2@localhost \
--to=grant.likely@secretlab.ca \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).