[PATCH 3/4] ARM: mach-shmobile: r8a7779: Minimal setup using DT

[horms@verge.net.au (Simon Horman)]

On Mon, Feb 18, 2013 at 06:36:12PM +0900, Magnus Damm wrote:
> Hi Simon,
> 
> Here's some feedback on your r8a7779 DT code.
> 
> On Thu, Jan 31, 2013 at 10:50 AM, Simon Horman
> <horms+renesas@verge.net.au> wrote:
> > Allow a minimal setup of the r8a7779 SoC using a flattened device tree.
> > In particular, configure the i2c and ethernet controllers using a
> > flattened device tree.
> >
> > SCI serial controller and TMU clock source, whose drivers do not yet
> > support configuration using a flattened device tree, are still configured
> > using C code in order to allow booting of a board with this SoC.
> >
> > The ethernet controller also requires a regulator which is a board property.
> > A sample snippet DT for the marzen board is as follows:
> >
> > /dts-v1/;
> > /include/ "r8a7779.dtsi"
> >
> > / {
> >         fixedregulator3v3: fixedregulator at 0 {
> >                 compatible = "regulator-fixed";
> >                 regulator-name = "fixed-3.3V";
> >                 regulator-min-microvolt = <3300000>;
> >                 regulator-max-microvolt = <3300000>;
> >                 regulator-boot-on;
> >                 regulator-always-on;
> >         };
> > };
> >
> > &lan0 {
> >         vddvario-supply = <&fixedregulator3v3>;
> >         vdd33a-supply = <&fixedregulator3v3>;
> > };
> >
> > Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> > ---
> 
> > --- a/arch/arm/mach-shmobile/setup-r8a7779.c
> > +++ b/arch/arm/mach-shmobile/setup-r8a7779.c
> > @@ -321,7 +321,7 @@ static struct platform_device i2c3_device = {
> >         .num_resources  = ARRAY_SIZE(rcar_i2c3_res),
> >  };
> >
> > -static struct platform_device *r8a7779_early_devices[] __initdata = {
> > +static struct platform_device *r8a7779_early_devices_dt[] __initdata = {
> >         &scif0_device,
> >         &scif1_device,
> >         &scif2_device,
> > @@ -330,15 +330,15 @@ static struct platform_device *r8a7779_early_devices[] __initdata = {
> >         &scif5_device,
> >         &tmu00_device,
> >         &tmu01_device,
> > +};
> > +
> > +static struct platform_device *r8a7779_early_devices[] __initdata = {
> >         &i2c0_device,
> >         &i2c1_device,
> >         &i2c2_device,
> >         &i2c3_device,
> >  };
> >
> > -static struct platform_device *r8a7779_late_devices[] __initdata = {
> > -};
> > -
> 
> Thanks for your work on this. Two things with early/late devices on r8a7779:
> 
> 1)  Same thing as sh73a0 applies here, please refrain from using early
> devices with DT.

I guess you are referring to tmu.
If so, yes, I can move them to r8a7779_early_devices.

> 2) The i2c devices as early devices look incorrect. Can you make them
> late devices?

r8a7779_early_devices is only used for the non-DT case.
For the non-DT case i2c was set up as early devices before this patch-set.
Would you like me to change them to late devices for non-DT,
a change that is orthogonal to this patch-set?