From: nm@ti.com (Nishanth Menon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 09/15] ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method
Date: Fri, 1 Mar 2013 15:53:16 -0600 [thread overview]
Message-ID: <20130301215315.GA23856@kahuna> (raw)
In-Reply-To: <1362139864-9233-10-git-send-email-santosh.shilimkar@ti.com>
On 17:40-20130301, Santosh Shilimkar wrote:
> While waking up CPU from off state using clock domain force wakeup, restore
> the CPU power state to ON state before putting CPU clock domain under
> hardware control. Otherwise CPU wakeup might fail. The change is recommended\
the trailing \ was unintentional I suppose.
> for all OMAP4+ devices though the PRCM weakness was observed on OMAP5
> devices first.
>
> So update the code accordingly.
>
> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> ---
> arch/arm/mach-omap2/cpuidle44xx.c | 1 +
> arch/arm/mach-omap2/omap-smp.c | 12 ++++++++++--
> 2 files changed, 11 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
> index 944e64a..9de47a7 100644
> --- a/arch/arm/mach-omap2/cpuidle44xx.c
> +++ b/arch/arm/mach-omap2/cpuidle44xx.c
> @@ -131,6 +131,7 @@ static int omap4_enter_idle_coupled(struct cpuidle_device *dev,
> /* Wakeup CPU1 only if it is not offlined */
> if (dev->cpu == 0 && cpumask_test_cpu(1, cpu_online_mask)) {
> clkdm_wakeup(cpu_clkdm[1]);
> + omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON);
> clkdm_allow_idle(cpu_clkdm[1]);
> }
>
> diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
> index 9711ecd..ba63b14 100644
> --- a/arch/arm/mach-omap2/omap-smp.c
> +++ b/arch/arm/mach-omap2/omap-smp.c
> @@ -83,6 +83,7 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct *
> {
> static struct clockdomain *cpu1_clkdm;
> static bool booted;
> + static struct powerdomain *cpu1_pwrdm;
> void __iomem *base = omap_get_wakeupgen_base();
>
> /*
> @@ -102,8 +103,10 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct *
> else
> __raw_writel(0x20, base + OMAP_AUX_CORE_BOOT_0);
>
> - if (!cpu1_clkdm)
> + if (!cpu1_clkdm && !cpu1_pwrdm) {
> cpu1_clkdm = clkdm_lookup("mpu1_clkdm");
> + cpu1_pwrdm = pwrdm_lookup("cpu1_pwrdm");
> + }
>
> /*
> * The SGI(Software Generated Interrupts) are not wakeup capable
> @@ -116,7 +119,7 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct *
> * Section :
> * 4.3.4.2 Power States of CPU0 and CPU1
> */
> - if (booted) {
> + if (booted && cpu1_pwrdm && cpu1_clkdm) {
> /*
> * GIC distributor control register has changed between
> * CortexA9 r1pX and r2pX. The Control Register secure
> @@ -137,7 +140,12 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct *
> gic_dist_disable();
> }
>
> + /*
> + * Ensure that CPU power state is set to ON to avoid CPU
> + * powerdomain transition on wfi
> + */
> clkdm_wakeup(cpu1_clkdm);
> + omap_set_pwrdm_state(cpu1_pwrdm, PWRDM_POWER_ON);
> clkdm_allow_idle(cpu1_clkdm);
>
> if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) {
Otherwise:
Acked-by: Nishanth Menon <nm@ti.com>
--
Regards,
Nishanth Menon
next prev parent reply other threads:[~2013-03-01 21:53 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-01 12:10 [PATCH 00/15] ARM: OMAP5: PM: Add MPUSS suspend and CPUidle support Santosh Shilimkar
2013-03-01 12:10 ` [PATCH 01/15] ARM: OMAP4+: PM: Consolidate MPU subsystem PM code for re-use Santosh Shilimkar
2013-03-01 13:50 ` Nishanth Menon
2013-03-01 12:10 ` [PATCH 02/15] ARM: OMAP5: PM: Update CPU context register offset Santosh Shilimkar
2013-03-01 17:34 ` Nishanth Menon
2013-03-01 12:10 ` [PATCH 03/15] ARM: OMAP4+: PM: Consolidate and use OMAP4 PM code for OMAP5 Santosh Shilimkar
2013-03-01 17:43 ` Nishanth Menon
2013-03-02 5:43 ` Santosh Shilimkar
2013-03-04 18:21 ` Nishanth Menon
2013-03-01 12:10 ` [PATCH 04/15] ARM: OMAP5: PM: Set MPUSS-EMIF clock-domain static dependency Santosh Shilimkar
2013-03-01 12:10 ` [PATCH 05/15] ARM: OMAP5: PM: Enables ES2 PM mode by default Santosh Shilimkar
2013-03-01 19:37 ` Nishanth Menon
2013-03-02 5:47 ` Santosh Shilimkar
2013-03-04 18:29 ` Nishanth Menon
2013-03-10 18:07 ` Santosh Shilimkar
2013-03-01 12:10 ` [PATCH 06/15] ARM: OMAP5: PM: Enable Mercury retention mode on CPUx powerdomains Santosh Shilimkar
2013-03-01 19:42 ` Nishanth Menon
2013-03-02 5:52 ` Santosh Shilimkar
2013-03-04 18:33 ` Nishanth Menon
2013-03-01 12:10 ` [PATCH 07/15] ARM: OMAP5: Add init_late() hook to enable pm initialization Santosh Shilimkar
2013-03-01 20:12 ` Nishanth Menon
2013-03-02 6:00 ` Santosh Shilimkar
2013-03-04 18:35 ` Nishanth Menon
2013-03-01 12:10 ` [PATCH 08/15] ARM: OMAP5: PM: Add CPU power off mode support Santosh Shilimkar
2013-03-01 21:36 ` Nishanth Menon
2013-03-02 6:14 ` Santosh Shilimkar
2013-03-04 18:38 ` Nishanth Menon
2013-03-01 12:10 ` [PATCH 09/15] ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method Santosh Shilimkar
2013-03-01 21:53 ` Nishanth Menon [this message]
2013-03-02 6:16 ` Santosh Shilimkar
2013-03-01 12:10 ` [PATCH 10/15] ARM: OMAP5: PM: Add MPU Open Switch Retention support Santosh Shilimkar
2013-03-01 22:05 ` Nishanth Menon
2013-03-01 12:11 ` [PATCH 11/15] ARM: OMAP5: PM: Add L2 memory power down support Santosh Shilimkar
2013-03-01 23:43 ` Nishanth Menon
2013-03-02 6:24 ` Santosh Shilimkar
2013-03-04 18:41 ` Nishanth Menon
2013-03-01 12:11 ` [PATCH 12/15] ARM: OMAP4+: CPUidle: Cleanup idle driver for OMAP5 support Santosh Shilimkar
2013-03-01 23:56 ` Nishanth Menon
2013-03-02 6:25 ` Santosh Shilimkar
2013-03-01 12:11 ` [PATCH 13/15] ARM: OMAP4+: CPUidle: Deprecate use of omap4_mpuss_read_prev_context_state() Santosh Shilimkar
2013-03-02 0:03 ` Nishanth Menon
2013-03-01 12:11 ` [PATCH 14/15] ARM: OMAP4+: CPUidle: Add OMAP5 idle driver support Santosh Shilimkar
2013-03-02 0:25 ` Nishanth Menon
2013-03-02 6:47 ` Santosh Shilimkar
2013-03-04 18:48 ` Nishanth Menon
2013-03-01 12:11 ` [PATCH 15/15] ARM: OMAP5: PM: handle device instance for for coldreset Santosh Shilimkar
2013-03-01 13:04 ` Nishanth Menon
2013-03-01 13:09 ` Santosh Shilimkar
2013-03-01 13:13 ` Nishanth Menon
2013-03-01 13:16 ` Santosh Shilimkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130301215315.GA23856@kahuna \
--to=nm@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).